Effect of the carbon coating in Fe-C-TiO(2) photocatalyst on phenol decomposition under UV irradiation via photo-Fenton process

Fe-C-TiO(2) photocatalysts which contained the residue carbon (0.2-3.3 mass%) were prepared from a mixture of TiO(2) and FeC(2)O(4) through the heating at 673-1173 K in Ar. These photocatalysts did not show a high adsorption of phenol, but they were active in photo-Fenton reactions during decomposition of phenol under UV irradiation with addition of H(2)O(2). It was proved that Fe(2+) governed the photoactivity of Fe-C-TiO(2) photocatalysts, it decreased with heat-treatment temperature above 773 K. For comparison, Fe-TiO(2) photocatalyst was prepared by heating TiO(2) and FeC(2)O(4) at 823 K in air for 3h. Phenol decomposition was going much slower on Fe-TiO(2) photocatalyst in comparison with Fe-C-TiO(2), of which mechanism was different, on the former phenol was decomposed by the radical reaction, on the latter through a complex reaction with iron and intermediates of phenol decomposition. Therefore carbon-coating TiO(2) was found to be advantageous for mounting iron and its application for the phenol decomposition via photo-Fenton process.     

Organochlorine contaminant and retinoid levels in blubber of common dolphins (Delphinus delphis) off northwestern Spain

The effect of age, sex, nutritive condition and organochlorine concentration on blubber retinoid concentrations was examined in 74 common dolphins incidentally caught off northwestern Spain. Age and blubber lipid content were strong determinants of the retinoid concentrations in males, while these variables did not account for the variation found in females. Retinoids were positively correlated with organochlorines in males and negatively in females. However, pollution levels were moderate and likely to be below threshold levels above that a toxicological response is to be expected. Thus, a cause-effect relationship between organochlorine and retinoid concentrations could not be properly established, and the observed correlation may be the result of an independent association of the two variables with age. Further research on the influence of the best predictor variables on retinoid dynamics is required to implement the use of retinoids as biomarkers of pollutant exposure in cetaceans.     

Modelling spatial distribution of the Croatian marine benthic habitats

Within the framework of the 3-year project “Mapping the habitats of the Republic of Croatia” the marine benthic habitats of the entire Croatian maritory were mapped. The supralittoral and the mediolittoral were mapped as a function of the coastal lithology and the presumed levels of human impact (both in scale of 1:100,000). The infralittoral was mapped on the basis of spatial modelling (using neural networks as a modelling tool, data about habitats collected by fieldwork as the independent variable for training and testing the model, and the digital bathymetrical model, the distance from coast, the second spectral channel of Landsat ETM+ satellite image and the sea bottom sea temperature, salinity and current magnitude, as dependent variables). The circalittoral and the bathyal were mapped by overlapping and reinterpretation of the existing spatial databases (bathymetry and lithology) within the framework of the raster-GIS.     

Age trends and reproductive transfer of organochlorine compounds in long-finned pilot whales from the Faroe Islands

Total DDT and PCB concentrations were determined in blubber of 130 long-finned pilot whales, Globicephala melas (100 females and 30 males) from the Faroe Islands (northern north-east Atlantic). In males and immature females no relation was observed between age and organochlorine concentrations or the ratio of tDDT (total DDT)/PCB; in contrast, concentrations and ratios in mature females declined with age, which is attributed to reproductive transfer to their offspring during gestation and lactation. Relative abundance of DDE respective to tDDT increased in males and young females and decreased in mature females. Organochlorine transfer to offspring during lactation was found to represent about 60-100% of the mother's body load, while that occurring during gestation was estimated to be much lower, in the range 4-10% of mother's body load. Transfer rates tended to decrease with mother's age and were, consequently, much higher in primiparous females than in those that had already given birth. Transplacental rates were found to be consistent with the ratio between mother's body weight and neonatal body weight.     

Bearded vultures (<Emphasis Type="Italic">Gypaetus barbatus</Emphasis>) prefer fatty bones

In animal species, prey processing and the provisioning of nutrients are subject to several constraints related with finding, ingesting and processing food. In most bird species, these constraints are obvious as a consequence of food morphology. In the case of the bearded vulture (Gypaetus barbatus), in comparison with other species, its behavioural and physiological adaptations apparently allow this vulture to ingest bone remains irrespective of their morphology. Here, by comparing bones delivered to the nest to be consumed (selected) and remains found at an experimental feeding station and at bone-breaking sites or ossuaries (rejected), I tested whether bearded vultures are capable of choosing from among the various anatomical parts of an animal carcass in relation to their fatty acid content (nutrient concentration hypothesis), their size (width-reduction hypothesis) or both. The results suggest that bearded vultures prefer the fatty anatomical parts (with a high percentage of oleic acid) of an animal carcass regardless of bone length, although bone morphology as a consequence of handling efficiency or the ingestion process may also play a secondary role in food selection. The close association between the bones selected and their high fat value implies an optimisation of foraging time and of the increased energy gained from the food. This is in line with selective foraging to redress specific nutritional imbalances (nutrient concentration hypothesis) and, secondarily, the width-reduction hypothesis.     

A system coupling hybrid biological method with UV/O<Subscript>3</Subscript> oxidation and membrane separation for treatment and reuse of industrial laundry wastewater

The possibilities of application of a three-step system combining hybrid biological treatment followed by advanced UV/O₃ oxidation with in situ generated O₃ and membrane separation (ultrafiltration (UF) and nanofiltration (NF)) to treat and reuse the wastewater from an industrial laundry are presented. By the application of a hybrid moving bed biofilm reactor (HMBBR), the total organic carbon concentration was reduced for about 90 %. However, since the HMBBR effluent still contained organic contaminants as well as high concentrations of inorganic ions and exhibited significant turbidity (8.2 NTU), its further treatment before a possible reuse in the laundry was necessary. The UV/O₃ pretreatment prior to UF was found to be an efficient method of the membrane fouling alleviation. During UF, the turbidity of wastewater was reduced below 0.3 NTU. To remove the inorganic salts, the UF permeate was further treated during NF. The NF permeate exhibited very low conductivity (27–75 μS/cm) and contained only small amounts of Ca²⁺ and Mg²⁺; thus ,it could be reused at any stage of the laundry process.     

Home composting versus industrial composting: Influence of composting system on compost quality with focus on compost stability

Stability is one of the most important properties of compost obtained from the organic fraction of municipal solid wastes. This property is essential for the application of compost to land to avoid further field degradation and emissions of odors, among others. In this study, a massive characterization of compost samples from both home producers and industrial facilities is presented. Results are analyzed in terms of chemical and respiration characterizations, the latter representing the stability of the compost. Results are also analyzed in terms of statistical validation. The main conclusion from this work is that home composting, when properly conducted, can achieve excellent levels of stability, whereas industrial compost produced in the studied facilities can also present a high stability, although an important dispersion is found in these composts. The study also highlights the importance of respiration techniques to have a reliable characterization of compost quality, while the chemical characterization does not provide enough information to have a complete picture of a compost sample.     

The impact of environmental contamination with antibiotics on levels of resistance in soil bacteria

This study examined the effects of tetracycline and streptomycin on microorganisms in three different soil habitats: forest soil, agricultural soil, and compost. These antibiotics are commonly used in both medical and veterinary therapy as well as in the production of plant biomass and until quite recently, the production of animal biomass. Microcosms were used as model systems in which the number of microorganisms in environments containing different amounts of antibiotics was analyzed. The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of tetracycline and streptomycin were determined. The MIC and MBC values of tetracycline against the tested strains were 20 to 180 microg/ mL and 30 to 300 microg/mL, respectively, and of streptomycin, 360 to 500 microg/mL and > or =500 microg/mL, respectively. Resistant bacterial strains were identified and their physiological profiles assessed. Streptomycin and tetracycline were found to reduce the number of bacteria in the studied soils by between 50 and 80%. Soil bacteria were found to be more resistant to streptomycin than to tetracycline. The bacterial species showing the highest resistance to tetracycline were Rhizobium radiobacter, Burkholderia cepacia, Brevundimonas vesicularis, and Pasteurella multocida. Most soils with high concentrations of streptomycin (5 mg/kg) contained Rhizobium radiobacter, Burkholderia cepacia, and Sphingomonas multivorum, among others. The strains most resistant to tetracycline were isolated from agricultural soil that is constantly subjected to tetracycline pressure from animal manures and biosolids. Among resistant strains, opportunistic pathogens were identified.