Effect of DDVP on the histology and AChE kinetics of heart muscles of Rattus norvegicus

The LD50 of DDVP (Dichloro, dimethyl vinyl phosphate) for Rattus norvegicus was 21.4 mg/kg. b.w. The two sub lethal doses 1 and 3 mg/kg showed many histopathological changes in the working heart muscles and also showed significant necrosis in this S-A node, A-V node and bunble of His of the cardiac conducting system. These sublethal doses of the OP pesticide caused a significant inhibition of AChE. The maximum inhibition was noticed at the highest dose. The enhanced inhibitory constant Km and ACh contents in the heart muscles with the increase of dose showed inhibition of enzyme. The constant Vmax showed competitive nature of inhibition. A significant inhibition of AChE (69%) indicated that DDVP is a strong inhibitor of enzyme in heart.     

Monitoring and modelling of indoor radon concentrations in a multi-storey building at Mumbai,India

Radon (Rn(222)) levels in an indoor atmosphere of a multi-storey building at Mumbai have been measured for one year covering all the four seasons. Monitoring was carried out using the time-integrated passive detector technique, using Kodak-115 type Solid State Nuclear Track Detector (SSNTD) films of 2.5x2.5 cm size. Measured indoor radon levels showed a decreasing trend with height with concentration ranging from 41 Bq m(-3) at ground floor level to 15 Bq m(-3) at 19th floor level. Using the dose conversion factors, the inhalation dose due to breathing of radon gas is estimated to be 1.03 mSv y(-1) at the ground floor to 0.38 mSv y(-1) at the 19th floor level. Measured indoor radon concentrations on each floor were compared with the computed values using a mathematical model. The agreement between measured values and calculated values of indoor concentrations at different floors was very good within the limitations of various field parameter values.     

A modified in-vitro method to assess bioavailable arsenic in pesticide-applied soils

An incubation study was designed to modify the existing in vitro methods to increase the accuracy in estimation of bioavailable arsenic in pesticide-applied soils. In addition to simulating arsenic dissolution in gastric and intestinal solutions, absorbtion by the intestinal membrane was also mimicked using iron-oxide coated filter paper strips inserted in nylon bags. The in vitro experiments were sequentially performed in two phases, namely, the stomach phase and the absorbed-intestinal phase. Arsenic extraction in the in vitro absorbed intestinal phase increased, thereby making it more comparable to the potential in vivo arsenic pool. While animal studies are needed to verify the in vitro results, preliminary data indicate that this modified method may be able to improve site-specific bioavailability predictions in arsenic-contaminated soils.     

Profenofos residues in wild fish from cotton-growing areas of New South Wales, Australia

The organophosphorus (OP) pesticide profenofos (O-4-bromo-2-chlorophenyl O-ethyl S-propyl phosphorothioate) is used heavily in cotton-growing areas of eastern Australia toward the end of the growing season. European carp (Cyprinus carpio), bony bream (Nematalosa erebi), and mosquitofish (Gambusia holbrooki) were collected from the cotton-growing areas around Wee Waa, New South Wales, to determine the relationship between profenofos residues and acetyl-cholinesterase (AChE) activity in wild fish. Profenofos concentrations in water, sediment, and fish tissue reflected its general level of use; levels in March 1994 were significantly higher than in 1993 and generally decreased in May, 6 wk after cessation of spraying. Residues in carp and bony bream generally correlated with concentrations in water and sediment, although residues in fish tend to persist longer at some sites. Acetylcholinesterase inhibition was a useful indicator of profenofos exposure within a season, particularly if linked with residue measurements. Bony bream and gravid female mosquitofish recovered AChE levels more slowly than carp or nongravid mosquitofish. Recovery in creeks was generally more rapid than in lagoons.     

Entrainment mortality of Ichthyoplankton: Detectability and precision of estimates

The ability to detect and to develop a precise and accurate estimate of the entrainment mortality fraction is an important step in projecting power plant impacts on future fish population levels. Recent work indicates that these mortailities may be considerably less than 100% for some fish species in the early life stages. Point estimates of the entrainment mortality fraction have been developed based on probabilistic arguments, but the precision of these estimates has not been studied beyond the simple statistical test of the null hypothesis that no entrainment mortaility exists.The ability to detect entrainment mortality is explored as a function of the sample sizes (numbers of organisms collected) at the intake and discharge sampling stations of a power plant and of the proportion of organisms found alive in the intake samples (intake survival). Minimum detectable entrainment mortality, confidence interval width, and type II error (probability of accepting the null hypothesis of no entrainment mortality when there is mortality) are considered. Increasing sample size and/or decreasing sampling mortality will decrease the minimum detectable entrainment mortality, confidence interval width, and type II error for a given level of type I error.The results of this study are considered in the context of designing useful monitoring programs for determining the entrainment mortality fraction. Preliminary estimates of intake survival and the entrainment mortality fraction can be used to obtain estimates of the sample size needed for a specified level of confidence interval width or type II error. Final estimates of the intake survival and the entrainment mortality fraction can be used to determine the minimum detectable entrainment mortality and the type II error.     

Air quality assessment along Dhanbad - Jharia road

Road ambient air pollution status along Dhanbad – Jharia road isstudied and presented in this article. The selection of this areais made considering the importance of the road in Dhanbad district and the nature of activities taking place along the road, which reflect that the portion of road upto Dhansar can be considered as having commercial areas on both sides and that from Dhansar to Jharia as having industrial areas on both sides.For the assessment of the ambient air quality along the road monitoring is done at the following five locations: Indian Schoolof Mines (ISM), main gate; Bankmore; Dhansar police check post; Dhansar opencast project agent office and a residential house beside the Rajapur opencast project. The location of ISM, maingate is specially chosen as this represents a commercial shoppingcomplexes and the situation can be compared with that at Bankmore. Monitoring of ambient air quality is done following thestandard procedure prescribed in IS: 5182. In addition the concentration of lead, zinc, copper, iron, manganese, cadmium metals in SPM is also monitored. The ambient air quality is monitored in the months of September and November 1999, respectively, to represent monsoon and winter seasons. The SPM concentration observed at all the five locations in the winterseason is more than the permissible limits for commercial andindustrial areas. However, in the monsoon season, the SPM concentration is higher than the permissible limit at the twocommercial locations, i.e., ISM gate and Bankmore, while it isless than the prescribed limit for industrial areas at the remaining three locations. At the ISM gate and Bankmore the SPM generation is mainly by vehicular traffic while at other three locations it was in addition due to mining and other activities.     

Assessment of the environmental profile of PLA,PET and PS clamshell containers using LCA methodology

Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

Field evaluation of resistivity sensors for in situ moisture measurement in a bioreactor landfill

The ability of resistance-based sensors to measure in situ waste moisture content in a landfill was examined. One hundred and thirty-five resistance-based sensors were installed in a leachate recirculation well field at a bioreactor landfill in Florida, US. The performance of these sensors was studied for a period of over 6 years. The sensors were found to respond to an increase in moisture resulting from leachate recirculation. It was observed that 78% of sensors worked successfully in the field during the study period. The initial spatial average moisture content determined by the sensor readings (using a laboratory-derived calibration) was 42.8% compared to 23% from gravimetric readings. Eighteen sensors (13%) showed that they were saturated before liquid addition, and no change in moisture content was observed in these sensors during the study period. Laboratory-derived calibration methods resulted in an over-estimation of moisture content. An alternate field-calibration method, where wetted sensor output was assumed equal to the average of gravimetric measurements for wet samples, was evaluated. The final spatial average moisture contents were 64.2% and 44.4% for the laboratory-derived and field-derived calibration methodologies, respectively, compared to 45% measured gravimetrically from excavated waste samples. When moisture content was determined using a mass balance approach, the result was 34.6%. The results suggest that when appropriately calibrated, resistivity-based sensors can be used to obtain a reasonably accurate estimate of local moisture content. However, caution should be taken to extend the moisture content values that are representative of waste surrounding the sensors to estimate the overall moisture content on the landfill-wide scale.