Uphill permeation of Cr(VI) using Hostarex A327 as ionophore by membrane-solvent extraction processing

The transport of chromium by the emulsion pertraction technology (EPERT) using Hostarex A327 (tertiary amine) as a carrier has been investigated. The permeation of the metal is studied as a function of various experimental variables: hydrodynamic conditions, concentration of Cr(VI) and HCl in the source phase, carrier concentration and diluent in the organic phase, strippant concentration in the stripping phase and support characteristics of the membrane. The mass transfer coefficient and the thickness of the aqueous source boundary layer were estimated from the experimental data. Furthermore, the selectivity of the Hostarex A327-bases EPERT towards different metal ions and the behaviour of the system against other carriers are presented.     

Geochemistry of leachates from the El Fraile sulfide tailings piles in Taxco, Guerrero, southern Mexico

Leachates from the El Fraile tailings impoundment (Taxco, Mexico) were monitored every 2 months from October 2001 to August 2002 to assess the geochemical characteristics. These leachates are of interest because they are sometimes used as alternative sources of domestic water. Alternatively, they drain into the Cacalotenango creek and may represent a major source of metal contamination of surface water and sediments. Most El Fraile leachates show characteristics of Ca–SO₄, (Ca+Mg)–SO₄, Mg–SO₄ and Ca–(SO₄+HCO₃) water types and are near-neutral (pH=6.3–7.7). Some acid leachates are generated by the interaction of meteoric water with tailings during rainfall events (pH=2.4–2.5). These contain variable levels of SO₄ ²⁻ (280–29,500 mg l⁻¹) and As (<0.01–12.0 mg l⁻¹) as well as Fe (0.025–2352 mg l⁻¹), Mn (0.1–732 mg l⁻¹), Zn (<0.025–1465 mg l⁻¹) and Pb (<0.01–0.351 mg l⁻¹). Most samples show the highest metal enrichment during the dry seasons. Leachates used as domestic water typically exceed the Mexican Drinking Water Guidelines for sulfate, hardness, Fe, Mn, Pb and As, while acidic leachates exceed the Mexican Guidelines for Industrial Discharge Waters for pH, Cu, Cd and As. Speciation shows that in near-neutral solutions, metals exist mainly as free ions, sulfates and bicarbonates, while in acidic leachates they are present as sulfates and free ions. Arsenic appears as As^(V) in all samples. Thermodynamic and mineralogical evidence indicates that precipitation of Fe oxides and oxyhydroxides, clay minerals and jarosite as well as sorption by these minerals are the main processes controlling leachate chemistry. These processes occur mainly after neutralization by interaction with bedrock and equilibration with atmospheric oxygen.     

Remediation of a biodiesel blend-contaminated soil by using a modified Fenton process

A soil contaminated with a B20 biodiesel blend (20 % biodiesel, 80 % diesel) has been treated by modified Fenton process with or without chelant addition. All experiments were conducted without pH adjustment. The reagents used were as follows: hydrogen peroxide as oxidant (400–4,000 mmol L^?1), ferric ion as catalyst (5–20 mmol L^?1), and trisodium citrate (50 mmol L^?1) as chelating agent. Soil was spiked at two different pollutant concentrations (1,000–10,000 mg diesel kg^?1 soil). Higher total petroleum hydrocarbon (TPH) removal efficiencies were obtained (up to 75 %) after the treatment in the absence of the chelant due to the low pH obtained in this case. In the presence of chelant, the TPH conversion obtained was lower because both higher pH is obtained and chelant competes with diesel for the oxidant. On the other hand, at neutral pH, the lifetime of the oxidant was increased. Fatty acid methyl esters (FAMEs) are easier to remove than diesel aliphatic hydrocarbons from the blend. An important decrease of the aqueous phase toxicity was observed after the modified Fenton reaction, supporting that nontoxic by-products were released to the aqueous phase during the treatment.     

Thermally assisted mechanical dewatering (TAMD) of suspensions of fine particles: analysis of the influence of the operating conditions using the response surface methodology

Thermally assisted mechanical dewatering (TAMD) is a new process for energy-efficient liquid/solids separation which enhances conventional-device efficiency. The main idea of this process is to supply a flow of heat in mechanical dewatering processes to favour the reduction of the liquid content. This is not a new idea but the proposed combination, especially the chosen operating conditions (temperature <100 degrees C and pressure <3000 kPa) constitutes an original approach and a significant energy saving since the liquid is kept in liquid state. Response surface methodology was used to evaluate the effects of the processing parameters of TAMD on the final dry solids content, which is a fundamental dewatering parameter and an excellent indicator of the extent of TAMD. In this study, a two-factor central composite rotatable design was used to establish the optimum conditions for the TAMD of suspensions of fine particles. Significant regression models, describing changes on final dry solids content with respect to independent variables, were established with regression coefficients (usually called determination coefficients), R(2), greater than 80%. Experiments were carried out on a laboratory filtration/compression cell, firstly on different compressible materials: synthetic mineral suspensions such as talc and synthetic organic suspensions such as cellulose, and then on industrial materials, such as bentonite sludge provided by Soletanche Bachy Company. Experiment showed that the extent of TAMD for a given material is particularly dependent on their physical and chemical properties but also on processing parameters.     

Leaching from granular cement-based materials during infiltration/wetting coupled with freezing and thawing

Many secondary materials are being considered for use as substitutes for natural aggregates in highway applications due to their suitable engineering and economic properties. During the design life of the application, recycled materials are exposed to freeze/thaw cycles and other aging processes such as carbonation, coupled with intermittent infiltration/wetting by precipitation events. In such scenarios, leaching of material constituents is a primary pathway for environmental impact. This paper presents results of the effect of freezing and thawing on the leaching behavior of major and minor constituents from a laboratory formulated granular cement-based material. Scenarios considered included water percolating through the material (flow-through) and run-off (flow-around), both important leaching pathways in highway environments. The effect of moisture content at the time of freezing, number of freeze/thaw (F/T) cycles, and material size reduction were investigated. F/T exposure and subsequent infiltration/wetting resulted in consolidation and self-cementing of the granular cement-based material. For the flow-around scenario, F/T exposure resulted in a reduction in constituent release with time and increasing F/T cycles. For the flow-through scenario, moisture content at the time of freezing was an important parameter and an increase in the release was initially observed due to preferential flow/cracks and/or constituent redistribution prior to a decrease that resulted from self-cementing during further thawing and percolation.     

Attitudes and Perceptions about Ecological Resources, Hazards, and Future Land Use of People Living near the Idaho National Engineering and Environmental Laboratory

This paper examines the attitudes and perceptions of local people about ecological resources, environmental hazards, and future land use of the Idaho National Engineering and Environmental Laboratory (INEEL). Such monitoring of attitudes is an important aspect of environmental assessment. We interviewed 262 people who attended the 42nd Annual Free Fishermen's Breakfast at St. Anthony, Idaho, on 23 March 1997. We tested the null hypotheses that there were no differences in perceptions about ecological resources, hazards and future land use of INEEL as a function of gender, age, education, and place of residence. Dumping trash in the ocean and cutting rainforests rated as the environmental problems of highest concern, and ozone, radon and high voltage lines rated the lowest; cleaning up Department of Energy sites rated intermediate. Respondents were most willing to expend government funds to make drinking water clean. Three significant differences were found: 1) women rated environmental problems as more severe than did men, and women were more willing to expend federal funds to solve these problems, 2) respondents under 30 years of age rated environmental problems as more severe than older people, and they were more willing to spend money to solve them, and, 3) respondents who had not finished high school were more concerned with environmental problems and were more willing to spend money to solve them than respondents with a high school education. Maintaining INEEL as a National Environmental Research Park (NERP) rated as the most preferred future land use, followed by continued reprocessing of nuclear materials and hunting. Using INEEL for housing and additional nuclear waste storage rated the lowest. Men rated grazing livestock and additional nuclear waste storage higher than did women. In general, respondents from 30 – 49 rated several economic uses (hunting, grazing livestock, growing crops) higher than did people in other age groups. Respondents with some college rated these economic uses higher than did respondents who had not graduated from high school. These results indicate that respondents living around INEEL believe that INEEL should continue with a reprocessing and NERP mission, but that other peripheral uses, such as hunting, hiking and grazing, should be allowed on some of the land. These views should aid in environmental assessment of the site, and in developing further management plans for INEEL.     

Modified SBA-15 mesoporous silica for heavy metal ions remediation

N-Propylsalicylaldimino-functionalized SBA-15 mesoporous silica was prepared, characterized and used as an adsorbent for heavy metal ions. The organic-inorganic hybrid material was obtained using successive grafting procedures of SBA-15 silica with 3-aminopropyl-triethoxysilane and salicylaldehyde, respectively. For comparison an amorphous silica gel was functionalized using the same procedure. The structure and physicochemical properties of the materials were characterized by means of elemental analysis, X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis and FTIR spectroscopy. The organic functional groups were successfully grafted on the SBA-15 surfaces and the ordering of the support was not affected by the chemical modification. The behavior of the grafted solids for the adsorption of heavy metals ions from aqueous solutions was investigated. The hybrid materials showed high adsorption capacity and high selectivity for copper ions. Other ions, such as nickel, zinc, and cobalt were adsorbed by the modified SBA-15 material. The adsorbent can be regenerated by acid treatment without altering its properties.