Initial Changes in Refilled Lysimeters Built with Metal Polluted Topsoil and Acidic or Calcareous Subsoils as Indicated by Changes in Drainage Water Composition

Soil translocation for recultivation of soil removed from construction sites and for the preparation of refilled lysimeters inevitably involves disturbance of soil structure, and, if intermediate storage is included, also drying and rewetting of the soil. We report on an experiment with model forest ecosystems, where uncontaminated forest subsoils were covered with non-contaminated or freshly heavy metal (mainly Zn and Cu) contaminated topsoil in large lysimeters. Monitoring of the chemical composition of the drainage water revealed two distinct soil conditioning phases. During an initial phase of about a year strongly elevated nitrate and sulfate concentrations occurred that were attributed to a mineralisation flush caused by the increased accessability of mineralisable nitrogen and sulfur in destroyed aggregates. These effects were significantly larger in lysimeters with calcareous subsoil than in those with acidic subsoil. The second phase was characterised by a gradual decrease in dissolved organic carbon and sulfate concentrations, in particular in the acidic subsoil. This decrease may be attributed to the depletion of pools made accessible during aggregate destruction or the formation of new aggregates. These chemical changes had only little effects on the concentrations of copper and zinc in the drainage water. Based on our results, it can be concluded that large refilled lysimeters can be used for many purposes without risk of compromised results, if a conditioning phase of about 1 year with sufficiently moist soil conditions is respected. Nevertheless, gradual changes in soil chemical characteristics still occur after this initial phase. Implications for the recultivation of sites using relocated soils are discussed.     

Biomonitoring zur wirkungsbezogenen Ermittlung der Schadstoffbelastung in terrestrischen Ökosystemen

Biomonitoring programmes provide relevant information, which may supplement ambient air pollution monitoring or modelling around emission sources. As a prerequisite, assessment scales for biomonitoring data have to be derived based on an objective evaluation of available data, as well as on a scheme of presentation, which is suggestive and easily understandable even for laymen. Based on an evaluation of numerous monitoring programmes, assessment scales for biomonitoring results are derived for plant biomonitoring, which also serve as a basis for the graphical presentation of monitoring results. This study is focussed on bioindicator plants like mosses (passive biomonitoring) and exposed lichens (active biomonitoring), in which 14 metal elements are investigated. As an example, data from a local biomonitoring network around a cement plant were used to demonstrate the use of the assessment scales derived and the presentation scheme developed. Data sets from about 15 moss and 24 lichen biomonitoring programmes, comprising more than 1000 specimens, were sorted by their pollutant characteristics in order to form the database. Data on the metal contents of species demonstrating similar values with respect to growth characteristics and habit, and representing background or low pollution levels, are aggregated and their statistical distributions are evaluated. Spacing of the assessment scales and their colour designations are derived from the 50-, 75-, 90- and 95-percentile values. Graphical presentation allows a comparison of the absolute values of metal contents and a relative association of measured values. Exemplary results from moss and lichen monitoring around a cement plant are generally below or slightly above the median values at background and low-pollution sites. Metal contents are higher in lichens compared to mosses for 7 elements (Cd, Cu, Hg, Pb, Sb, Sn, Zn), and are lower in lichens only for thallium. The assessment scheme presented is mainly aimed at the practitioner in the field of biomonitoring in order to provide a reliable and sound scale of assessment by comparison on an absolute scale rather than presenting the basis of ecological risk assessment. Differences in metal content of co-located samples of various moss species and possible correction procedures are briefly discussed- as well as the consequences of pooling monitoring data across various moss species for the quality of assessment scales. Further evaluations shall focus on species-specific rather than on pooled databases and will investigate the consequences of the use of correction factors when extrapolating metal data from one monitoring species to another.     

Identification of heavy metal pollutants using multivariate analysis and effects of land uses on their accumulation in urban soils in Beijing, China

In order to evaluate the current state of the environmental quality of soils in Beijing, we investigated contents of 14 metals in Beijing urban soils inside the 5th ring road by even grids sampling. Statistic analyses were conducted to identify possible heavy metal pollutants, as well as the effects of land uses on their accumulation. Our results revealed that the urban soils in Beijing were contaminated by Cd, Pb, Cu, and Zn. Land uses and urbanization ages affected the accumulation of the four heavy metals in soils significantly. Soils in industrial areas have the highest average Cu and Zn contents, while Pb contents in park areas and Cd in agricultural areas are the highest. The accumulations of Pb and Zn in urban soils increase significantly with sampling plots approaching the city center. And Pb, Cd, and Zn contents in soils in traffic areas also tend to increase in the city center. However, residential areas have the lowest contents of all the four heavy metals.     

Physical Modeling of Emissions from Naturally Ventilated Underground Parking Garages

The dispersion of pollutants from naturally ventilated underground parking garages has been studied in a boundary layer wind tunnel. Two idealized model setups have been analysed, one was simulating pollutant dispersion around an isolated rectangular building and one was representing dispersion in a finite array of idealized building blocks. Flow and dispersion close to modelled ground level emission sources was measured. The results illustrate the complexity of the flow around buildings and provide insight in pollutant transport from ground level sources located directly on building surfaces. As a result, areas critical with respect to high pollutant concentrations could be visualized. Particularly, the results show high concentration gradients on the surface of the buildings equipped with modelled emission sources. Inside the boundary layers on the building walls, a significant amount of pollutants is transported to upwind locations on the surface of the building. The paper documents the potential of physical modelling to be used for the simulation and measurement of dispersion close to emission sources and within complex building arrangements.     

Nitrogen and metals in two regions in Central Europe: Significant differences in accumulation in mosses due to land use?

The study was conducted to test the hypothesis that the regional variability of nitrogen (N) and metal accumulations in terrestrial ecosystems are due to historical and recent ways of landuse. To this end, two regions of Central Europe were selected for investigation: the Weser-Ems Region (WER) and the Euro Region Nissa (ERN). They were assumed to have land use-specific accumulation profiles. Thus, the metal and N accumulations in both regions were examined by means of geostatistically based comparative moss analysis. The sampling and chemical analysis of mosses were conducted in accordance with the convenient guidelines and methods, respectively. The spatial representativity of the sampling sites was computed by means of a land classification which was calculated for Europe by means of classification trees and GIS-techniques. The differences of deposition loads were tested for statistical significance with regard to time and space. The measurement values corroborated the decline of metal accumulation observed since the beginning of the European Metals in Mosses Surveys in 1990. The metal loads of the mosses in the ERN exceeded those in the WER significantly. The opposite holds true for the N concentrations: those in the WER were significantly higher than those in the ERN. The reduction of emissions from power plants, factories and houses was strongly correlated with the decline of deposition and bioaccumulation of metals. As proved by the European Metals in Mosses Surveys, this tendency is due to successful environmental policies. But no such success could be verified by monitoring the accumulation of N in mosses.     

Das Biologische System der Elemente (BSE): Eine modelltheoretische Betrachtung zur Essentialität von chemischen Elementen

The correlation of data on the elements obtained by instrumental chemical analysis of highly representative plant samples led to the establishment of a first Biological System of Elements (BSE) in 1994. Including other physiological parameters like availability of chemical elements, transport, storage, etc. it is clear, that aside from the bioinorganic aspects of coordination chemistries of given elements, features of essentiality or toxicity depend on their interference with enzymatic processes. Notably, the latter are not to be considered as purely catalytic transformations, but are instead related to the reproduction of organisms in a direct or indirect manner — as autocatalytic: a process whereby a protein containing some metal or burdened in function by its presence is indirectly involved in its own reproduction. Stoichiometric Network Analysis (SNA) explicitly deals with the general dynamics of such autocatalytic systems. Given there is a relationship between the kinds of metal or metalloid species and the key biological/biochemical transformations to be promoted using them — a relationship which is the topic of bioinorgnaic chemistry-, and that biochemistry is in effect about systems which can reproduce and thus behave autocatalytically, one can expect SNA to yield statements on the basic features of biology and biochemistry as well.     

Löwenzahn Taraxacum officinale Web. als (städtischer) Bioindikator

Investigations of the dandelion, Taraxacum officinale Web. in Poland, Romania and Germany showed that the species concentrates various elements dependent on the intensity of the pollutants. In this study, we followed up the question of whether T. officinale enriches pollutants by the atmospheric deposition on the leaves or via the soil. Therefore, samples from at least 10 plants and a soil sample at 57 sample sites were collected from a grid of 500 m × 500 m. In addition to the analysis of the total soil sample, the (mobile) ion pool of the soil (DIN V 19739) was analysed. The elements Al, As, Ba, Ca, Cd, Ce, Co, Cr, Cu, Fe, Ga, K, Mg, Mn, Mo, Na, Ni, Rb, Sr, Ti, Tl, V, and Zn were determined through the use of spectrometry with inductive coupled plasma (ICP-MS and ICP-OES). The results are compared with the element concentrations of washed and unwashed leaf samples in T. officinale. We could only find two direct correlations (Ti and Zn) between the element content, of the entire soil samples, but 14 correlations (As, Ba, Cd, Cu, Ga, K, Mn, Mo, Na, Ni, Rb, Ti, Tl und Zn) between the ion pool of the soil and the washed samples. The grid point data interpolation by ArcInfo showed a similar distribution pattern for the unwashed leaf elements Al, Ce, Fe, Ti and V (r≥0.75). The elements Al, Ce, Fe, Ti, and V are washed out at the same ratio. Thus, although the concentration of these elements were significantly reduced by the washing procedure, the correlations were not influenced. The admissibility of the grid point data interpolation for a distribution map of the town area was investigated, as well. It is shown that the element content varies with the land use (meadow, field, rural areas), the sampling point and the local pollutants. However, none of the discussed elements, Al, Ce, Fe, Ti, and V, is significantly influenced by the land use. The data allows one to make the conclusion that the elements of Al, Ce, Fe, Ti and V are dependent on the dry and wet deposition on the leaves of T. officinale. These elements are taken up not only by the roots, but also by the surface of the leaves. This is evident because there is no correlation between one of these elements in the leaves and the ion pool of the soil.     

A contribution to the distribution of some chemical elements inMolinia caerulea andEriophorum vaginatum during reinstatement of the Leegmoor,Emsland, FRG

The concentrations of Ag, Al, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, La, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Rb, Sr, Ti, V and Zn were determined by AES/ICP inMolinia caerulea andEriophorum vaginatum grown in the Leegmoor, which is in reinstatement. In the soil substrate analytical detection limits were obtained for Ag, Co, Li, Mo and Rb and additionally for Al, Be, Cd, Cr, La, Li, Ni, Pb, Ti and V in plants. Compared with mineral soils, the concentration of elements in peat is low. The elements K and P were enriched byMolinia caerulea andEriophorum vaginatum, and in addition Mn and Zn byEriophorum vaginatum. Altogether the ability of accumulation essential elements seem to be more efficient byEriophorum vaginatumthan byMolinia caerulea, which can be an ecophysiological advantage on peats, whereMolinia caerulea is normally not distributed.