西宁市典型开放源颗粒物粒径组成特征分析

采用BT-9300S激光粒度仪分析了西宁市道路尘、扬尘、土壤尘、建筑尘4种典型开放源的粒径组成。结果表明,4种类型尘中大粒径颗粒物占主导地位,粒径大于10 μm颗粒占到全部颗粒的73.80%以上,可吸入颗粒物的含量仅占7.06%～26.20%;建筑尘的细颗粒物含量最高,粒径小于2.5、1 μm的颗粒含量分别为8.36%±4.25%、2.42%±1.02%;道路尘的细颗粒物含量最低,粒径小于2.5、1 μm的颗粒含量分别为2.30%±0.94%、0.73%±0.28%;4种类型尘的体积平均直径、面积平均直径、中位直径分别在37.70～87.99 μm、8.50～23.53 μm、28.95～74.98 μm之间,其中道路尘的3种粒径参数最大,建筑尘最小;开放源颗粒物的粒度分布曲线主要呈头长尾短的不对称单峰分布,累积频率曲线为两段式,存在较为明显的拐点。     

Sublethal impact of paraquat on the life span and parasitic behavior of Diaeretiella rapae M’Intosh

This study focuses on assessing the impact of sublethal doses of paraquat on the survival, the emergence, the life span and the parasitic behavior of Diaeretiella rapae M’Intosh (Hymenoptera: Braconidae). The impact of sublethal doses was measured at room temperature using different densities of the cabbage aphid Brevicoryne brassicae. The results reveal that the field dose of paraquat caused 100% mortality in D. rapae. The percentage emergence of D. rapae decreased from 80.5% in the control group to 71.5% when treated with the lowest concentration of paraquat. Similarly, the life span of parasitoids that emerged from the mummy treated with paraquat also decreased significantly. Oviposition capability and ovipositor thrusting frequency of D. rapae also treated with sublethal dose paraquat decreased significantly along with a shortened patch residence time in the foraging area.     

Simulation of substrate degradation in composting of sewage sludge

To simulate the substrate degradation kinetics of the composting process, this paper develops a mathematical model with a first-order reaction assumption and heat/mass balance equations. A pilot-scale composting test with a mixture of sewage sludge and wheat straw was conducted in an insulated reactor. The BVS (biodegradable volatile solids) degradation process, matrix mass, MC (moisture content), DM (dry matter) and VS (volatile solid) were simulated numerically by the model and experimental data. The numerical simulation offered a method for simulating k (the first-order rate constant) and estimating k₂₀ (the first-order rate constant at 20 °C). After comparison with experimental values, the relative error of the simulation value of the mass of the compost at maturity was 0.22%, MC 2.9%, DM 4.9% and VS 5.2%, which mean that the simulation is a good fit. The k of sewage sludge was simulated, and k₂₀, k_20s (first-order rate coefficient of slow fraction of BVS at 20 °C) of the sewage sludge were estimated as 0.082 and 0.015 d^?1, respectively.     

A storm event-based approach to TMDL development

It is vitally important to define the critical condition for a receiving water body in the total maximum daily load (TMDL) development process. One of the major disadvantages of using a continuous simulation approach is that there is no guarantee that the most critical condition will be covered within the subjectively selected representative hydrologic period, which is usually several years depending on the availability of data. Another limitation of the continuous simulation approach, compared to a design storm approach, is the lack of an estimate of the risk involved. Because of the above limitations, a storm event-based critical flow-storm (CFS) approach was previously developed to explicitly address the critical condition as a combination of a prescribed stream flow and a storm event of certain magnitude, both having a certain frequency of occurrence and when combined, would create a critical condition. The CFS approach was tested successfully in a TMDL study for Muddy Creek in Virginia. The present paper reports results of a comparative study on the applicability of the CFS approach in Taiwan. The Dy-yu creek watershed in northern Taiwan differs significantly from Muddy Creek in terms of climate, hydrology, terrain, and other characteristics. Results show that the critical condition for different watersheds might be also different, and that the CFS approach could clearly define that critical condition and should be considered as an alternative method for TMDL development to a continuous simulation approach.     

Determination of total petroleum hydrocarbons (TPH) in agricultural soils near a petrochemical complex in Guangzhou,China

The total petroleum hydrocarbons (TPH) pollution in regional agricultural soils was investigated. Seventy soil samples collected from surface layers (0–20 cm) and horizons of five selected pedons in the vicinity of a petrochemical complex in Guangzhou, China were analyzed, and the vertical variation and spatial variability of TPH were evaluated. The TPH concentration in top soils around the petrochemical complex ranged from 1,179.3 to 6,354.9 mg kg^− 1, with the average of 2,676.6 mg kg^− 1. Furthermore, significant differences between land-use types showed that the TPH concentration in top soils was strongly influenced by accidental spills. Both the TPH trends in pedons and the identified hot-spot areas also showed that the accidental explosions or burning accidents were mainly responsible for the pollution. The results reported here suggest that the regular monitoring and inspection shall be conducted for safety and to avoid or minimize the accidents, and the effective measures should be taken to remediate the contaminated areas and to assure that the important industrialization of Guangzhou area would not mean human health risks near the petrochemical complex.     

Dynamics of the lakes in the middle and lower reaches of the Yangtze River basin, China, since late nineteenth century

The middle and lower reaches of the Yangtze River basin have the most representative and largest concentration of freshwater lakes in China. However, the size and number of these lakes have changed considerably over the past century due to the natural and anthropogenic impact. The lakes, larger than 10 km² in size, were chosen from relief maps and remotely sensed images in 1875, 1950, 1970, 1990, 2000, and 2008 to study the dynamics of lakes in the middle and lower reaches of the Yangtze River basin and to examine the causes and consequences of these changes. Results indicated that there was a dramatic reduction in lake areas, which decreased by 7,841.2 km² (42.64 %) during the study period (1875–2008), and the number of lakes in this region changed moderately. Meanwhile, a large number of lakes in the middle and lower reaches of the Yangtze River basin were directly converted into paddy fields, ponds, building lands, or other land-use types over the study period. Therefore, all kinds of lake reclamation should be identified as the major driving factors for the loss of lake in this region. Furthermore, flooding, soil erosion, and sedimentation were also the main factors which triggered lake changes in different periods. Some wetland conservation and restoration projects have been implemented since the 1970s, but they have not reversed the lake degradation. These findings were of great importance to managers involved in making policy for the conservation of lake ecosystems and the utilization of lake resources.     

Blood mercury concentration among residents of a historic mercury mine and possible effects on renal function: a cross-sectional study in southwestern China

This cross-sectional study aimed to investigate blood mercury (B-Hg) concentration of residents living in the vicinity of Chatian mercury mine (CMM) in southwestern China and to assess the possible effects on renal function. It evaluates the effects of gender and age (children, <18 years; adults, 18–60 years; elderly, >60 years) on the B-Hg and serum creatinine (SCR) and serum urea nitrogen (SUN) levels. In the CMM, elevated levels were found for B-Hg, SCR, and SUN with mean values at 6.09 μg/L, 74.21 μmol/L, and 13.26 mmol/L, which were significantly higher than those in the control area, respectively. Moreover, the coefficients between paired results for B-Hg and SCR and SUN levels were positive at statistical significance (B-Hg vs. SCR, r?=?0.45, p?<?0.01; B-Hg vs. SUN, r?=?0.20, p?<?0.05). The aforementioned results revealed that mercury exposure can cause human renal function impairment. B-Hg, SCR, and SUN can also be useful biomarkers to assess the extent of mercury exposure among residents in areas with extensive mining activities. Furthermore, data analysis revealed that there was a tendency for higher B-Hg, SCR, and SUN levels in females than in males, and the levels of B-Hg, SCR, and SUN increased among the older residents. We conclude that females and the elderly in the mining area were more susceptible to mercury exposure, and therefore, they deserve further research.     

Willingness and behavior towards e-waste recycling for residents in Beijing city,China

This paper is to investigate the behavior of residents towards electrical and electronic waste (e-waste) recycling in Beijing. For this purpose a large sample questionnaire survey was performed to explore the residents’ characteristics of recycling behavior and preference of e-waste recycling pattern. Besides, the willingness of residents to participate in e-waste recycling was also assessed in our study. For this a logistic regression model was developed to estimate and explain residents’ willingness in e-waste recycling. The model showed that Convenience of recycling facilities and service, Residential conditions, Recycling habit and Economic benefits are four determinants of Beijing residents’ willingness and behavior in e-waste recycling. And centralized recycling pattern by professional recovery spots would have a broad prospect if various kinds of channels can be provided to make the residents feel more convenient in e-waste recycling.     

Artificial neural network modeling of dissolved oxygen in the Heihe River, Northwestern China

Identification and quantification of dissolved oxygen (DO) profiles of river is one of the primary concerns for water resources managers. In this research, an artificial neural network (ANN) was developed to simulate the DO concentrations in the Heihe River, Northwestern China. A three-layer back-propagation ANN was used with the Bayesian regularization training algorithm. The input variables of the neural network were pH, electrical conductivity, chloride (Cl^?), calcium (Ca²⁺), total alkalinity, total hardness, nitrate nitrogen (NO₃-N), and ammonical nitrogen (NH₄-N). The ANN structure with 14 hidden neurons obtained the best selection. By making comparison between the results of the ANN model and the measured data on the basis of correlation coefficient (r) and root mean square error (RMSE), a good model-fitting DO values indicated the effectiveness of neural network model. It is found that the coefficient of correlation (r) values for the training, validation, and test sets were 0.9654, 0.9841, and 0.9680, respectively, and the respective values of RMSE for the training, validation, and test sets were 0.4272, 0.3667, and 0.4570, respectively. Sensitivity analysis was used to determine the influence of input variables on the dependent variable. The most effective inputs were determined as pH, NO₃-N, NH₄-N, and Ca²⁺. Cl^? was found to be least effective variables on the proposed model. The identified ANN model can be used to simulate the water quality parameters.     

Even sampling designs generation by charges repulsion simulation

Evenly distributed sampling design is generally considered as an efficient sampling design. It is widely used in sampling for the environmental survey. In this paper, we present a novel method for generating N evenly distributed samples within a given irregular polygon via simulating the movements of some ideal homogeneous point charges. Initially, charges are randomly put into the sampling region; then, they are freed and held orderly; and after enough runs, the charges will finally reach a stable state with all of them having a zero resultant force and velocity; and so they distribute evenly within the region. Their layout can thus be considered as an evenly distributed sampling design. The main advantages of this method are: (1) it is easy to understand and implement; (2) it is efficient in both running and generating better designs. Analysis and experimental results indicate that this method is an efficient and robust method for generating even sampling designs for 2D polygonal sampling region.