废水中硝基苯类化合物测定方法的探讨及新方法研究

探讨了废水中硝基苯类化合物的气相色谱法测定方法中的水样预处理操作繁琐,实验耗时长,且萃取时使用易挥发有毒有害的有机物二氯甲烷。另一种常见的测定方法还原-偶氮分光光度法,而染料、印染制革等工业废水的颜色较深,对测定造成干扰,通常通过蒸馏预处理消除水样颜色带来的干扰,而在蒸馏过程中因硝基苯类沸点较高不能将水样中的硝基苯类化合物全部蒸出,导致检测结果偏低。提出了一种经聚己内酰胺脱色,简单又快捷地消除水样中颜色的干扰,又避免了硝基苯类化合物蒸馏不完全的问题,再利用还原-偶氮分光光度法准确测定废水中硝基苯类化合物的方法。     

湿法吸收测定大气中的五氧化二磷

用２％ＮａＯＨ溶液吸收大气中的Ｐ２Ｏ５，用钼锑抗试剂显色定量。对样品的稳定性、方法的显色条件、精密度、准确度以及检出限进行反复试验，结果令人满意。     

Multivariate analysis of the bioaccumulation of polychlorinated biphenyls (PCBs) in the marine pelagic food web from the southern part of the Baltic Sea,Poland

The concentration, pattern, bioaccumulation and biomagnification features of many chlorobiphenyl congeners including non- and mono-ortho chlorine substituted members have been determined in a pelagic food chain including mixed phyto- and zooplankton, herring (Clupea harengus), harbour porpoise (Phocoena phocoena) and black cormorants (Phalacrocorax carbo sinensis) collected from the southern part of the Baltic Proper. TCDD (tetrachlorodibenzo-p-dioxin) toxic equivalents (TEQs) in plankton, herring, harbour porpoise and cormorants were 0.42, 5.3, 79 and 2,700 pg g(-1) lipid weight, respectively. Concentrations of total polychlorinated biphenyls (PCBs) in plankton, herring, harbour porpoise and cormorants were 1.9, 120, 8700 and 2,100 ng g(-1) wet weight (210, 1,300, 10,000 and 42,000 ng g(-1) lipid weight) respectively. Herring, harbour porpoise and black cormorant apparently bioaccumulate many PCBs found in their food, and the values of the bioaccumulation factors (BAFs) for PCBs were approximately 10 in herring, 35 in harbour porpoise and up to 300 in breast muscle of cormorants. Harbour porpoise clearly is able to metabolize the most toxic non-ortho PCBs (no. 77, 126 and 169) and a few mono-ortho PCBs (no. 114, 123 and 156), while all non- and mono-ortho PCBs are bioaccumulated by herring. Penta-, hexa- and hepta-CBs were the dominatant homologue classes both in the muscle tissue and liver. PCB congeners nos. 201, 209, 172/192, 194 and 195 were characterized by the largest BAFs (between 100 and 300). Principal component analysis has been used to analyse the interdependences and differences in the CB congener accumulation patterns between the components of the investigated pelagic food web.     

雨天硫酸盐化速率样品扩散分析

选择采样期不同降雨天数的碱片，测定余边的硫酸盐化速率含量，其结果为：采样期全月无雨时，余边上的硫酸盐均未检出；半月以上至全月有雨时检出率为１００％，检出量占样品量的２．７０～１５．９５％。经扩散试验，查清了余边上的硫酸盐主要是有效面积上采集的样品的扩散，并提出了相应的修正方法。     

Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.     

牛顿插值法在大气监测中的应用

本文将牛顿插值方法通过程序输入ＣＡＳＩＯｆｘ—４０００Ｐ计算器，应用到实际大气环境监测中，与实际监测结果作了对照，取得好的成果．该方法解决了基层监测站因特殊情况数据缺测的问题。     

上海部分城市污水处理厂现状调查

对上海市部分城市水污水处理厂的工艺特点，处理能力，污染物去除率，废水排放达标率进行了调查与分析，指出，必须加强对城市污水处理厂的监督监测，并就污水处理厂的建设，改造提出了一些建议。     

气相色谱-质谱法测定废酸油渣中的16种多环芳烃

建立了废酸油渣中16种多环芳烃超声萃取、Florisil萃取柱净化、气相色谱-质谱测定的方法。笔者对提取方式、提取剂类型和体积、提取时间和次数、净化方式等进行研究,采用无水硫酸钠分散,二氯甲烷作为提取剂超声40 min,提取液经纯水清洗、离心后取适量有机相经过3 g Florisil萃取柱净化,采用气相色谱-质谱选择离子模式(SIM),加入内标进行定量分析。结果表明:二氯甲烷提取效率比正己烷好,丙酮可能引起酸性样品中多环芳烃的降解,丙酮超声萃取时加入无水硫酸钠能在一定程度上防止目标物降解,但萃取效率不可控制,宜采用二氯甲烷作为萃取剂。分散提取能有效减少提取时间,超声清洗仪超声40 min提取效率为86.2%～104%。3g Florisil萃取柱净化比1 g Florisil萃取柱净化和GPC净化效果略好。方法检出限为0.4～1.3 mg/kg,6次空白加标的相对标准偏差为2.3%～15.3%,6个实际样品测定结果的相对标准偏差为1.2%～27.3%,基体加标回收率为51.3%～126%,连续校准稳定。该方法适用于废酸油渣样品中16种多环芳烃的检测,比直接溶解有效,比加速溶剂萃取、索氏提取、微波萃取和超声探头萃取简单、快捷,能有效减少设备污染和腐蚀,净化方法有效,测定结果准确可靠,是实现大批量样品检测的可行方法。     

水体中重要污染元素化学形态分析研究方法及其进展

概述了元素化学形态分析的意义、概念和范围，元素化学形态分析与模拟计算方法，并分别对某些重要元素的化学形态分析方法的进展作了综述，介绍了１１５篇文献。     

分光光度法测定染色废水的色度

为消除测定染色废水色度的主观误差，采用分光光度法测定染色废水的色度，与稀释倍数法相比，具有精确，重现性好，适用范围广等特点，ＰＨ值对色度的测定有明显影响，控制ＰＨ值为７．６０，测定色度具有可比性。