In-situ partitioning of butyltin compounds in estuarine sediments

The in-situ solid/pore-water partitioning of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) was determined for an estuarine sediment profile collected from a commercial marina. Total butyltin levels exceeded sediment quality guideline values, and were 220-8750 microg/kg for TBT, 150-5450 microg/kg for DBT and 130-4250 microg/kg for MBT. Pore-water butyltin concentrations ranged from 0.05 to 2.35 microg/l for TBT, 0.07-3.25 microg/l for DBT, and 0.05-0.53 microg/l for MBT. The partitioning of butyltin compounds between the sediment solid-phase and pore-water was described by an organic carbon normalised distribution ratio (D(OC)). The observed D(OC) values were similar for TBT, DBT and MBT, and were 10(5)-10(6) l/kg. Values for the Butyltin Degradation Index (BDI) were larger than 1 at depths greater than 10 cm below the sediment/water-column interface. This indicates that substantial TBT degradation has occurred in the sediments, and suggests that natural attenuation may be a viable sediment remediation strategy.     

Real-world vehicle emissions: a summary of the twelfth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council (CRC) held its 12th workshop in April 2002, with nearly 90 presentations on the most recent on-road vehicle emissions research. This paper summarizes the presentations from researchers who are engaged in improving understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed mobile source emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emissions control programs, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Comparative toxicity of Solvent Yellow 33 [2-(2′-quinolinyl)-1,3-indandione] and Solvent Green 3 (1,4-di-p-toluidinoanthraquinone) dyes to freshwater organisms

Solvent Yellow 33 and a Solvent Green 3 mixture (30:70 mixture of Solvent Yellow 33 and Solvent Green 3) were not acutely toxic to seven of nine freshwater species when tested at the solubility limits of the dyes in freshwater. A solubility limit solution of the Solvent Green 3 mixture killed 50% of the rainbow trout tested for 96 h but was non-toxic when diluted by 50%. Both dyes caused a reduction in green algal growth at solubility limits. The Solvent Green 3 mixture was the most detrimental causing a 98–99% reduction in growth after 5 days of exposure.     

Seasonal changes in the structure of rhesus macaque social networks

Social structure emerges from the patterning of interactions between individuals and plays a critical role in shaping some of the main characteristics of animal populations. The topological features of social structure, such as the extent to which individuals interact in clusters, can influence many biologically important factors, including the persistence of cooperation, and the rate of spread of disease. Yet, the extent to which social structure topology fluctuates over relatively short periods of time in relation to social, demographic, or environmental events remains unclear. Here, we use social network analysis to examine seasonal changes in the topology of social structures that emerge from socio-positive associations in adult female rhesus macaques (Macaca mulatta). Behavioral data for two different association types (grooming and spatial proximity) were collected for females in two free-ranging groups during two seasons: the mating and birth seasons. Stronger dyadic bonds resulted in social structures that were more tightly connected (i.e., of greater density) in the mating season compared to the birth season. Social structures were also more centralized around a subset of individuals and more clustered in the mating season than those in the birth season, although the latter differences were mostly driven by differences in density alone. Our results suggest a degree of temporal variation in the topological features of social structure in this population. Such variation may feed back on interactions, hence affecting the behaviors of individuals, and may therefore be important to take into account in studies of animal behavior.     

Cross-combined composite sampling designs for identification of elevated regions

Analyzing soils for contaminants can be costly. Generally, discrete samples are gathered from within a study area, analyzed by a laboratory and the results are used in a site-specific statistical analysis. Because of the heterogeneities that exist in soil samples within study areas, a large amount of variability and skewness may be present in the sample population. This necessitates collecting a large number of samples to obtain reliable inference on the mean contaminant concentration and to understand the spatial patterns for future remediation. Composite, or Incremental, sampling is a commonly applied method for gathering multiple discrete samples and physically combining them, such that each combination of discrete samples requires a single laboratory analysis, which reduces cost and can improve the estimates of the mean concentration. While incremental sampling can reduce cost and improve mean estimates, current implementations do not readily facilitate the characterization of spatial patterns or the detection of elevated constituent regions within study areas. The methods we present in this work provide efficient estimation and inference for the mean contaminant concentration over the entire spatial area and enable the identification of high contaminant regions within the area of interest. We develop sample design methodologies that explicitly define the characteristics of these designs (such as sample grid layout) and quantify the number of incremental samples that must be obtained under a design criteria to control false positive and false negative (Type I and II) decision errors. We present the sample design theory and specifications as well as results on simulated and real data.     

Hydrologic monitoring tools for freshwater municipal planning in the Arctic: the case of Iqaluit,Nunavut, Canada

Freshwater and the services it provides are vital to both natural ecosystems and human needs; however, extreme climates and their influence on freshwater availability can be challenging for municipal planners and engineers to manage these resources effectively. In Arctic Canada, financial and human capital limitations have left a legacy of freshwater systems that underserve current communities and may be inadequate in the near future under a warming climate, growing population, and increasing demand. We address this challenge to community water resource planning by applying several novel water supply forecasting methods to evaluate the Apex River as an alternative freshwater source for Iqaluit, Nunavut (Canada). Surveys of water isotope composition of the Apex River and tributaries indicated that rainfall is the main source of water replenishment. This information was utilized to calibrate a water resource assessment that considered climate forecasting scenarios and their influence on supply, and alternative scenarios for freshwater management to better adapt to a changing climate. We found that under current climate and demand conditions, the freshwater supply of Iqaluit would be in a perpetual state of drawdown by 2024. Analysis of current infrastructure proposals revealed significant deficiencies in the supply extensions proposed whereby the Apex replenishment pipeline would only provide a 2-year extension to current municipal supply. Our heuristic supply forecast methods allowed for several alternative supply strategies to be rapidly evaluated, which will aid the community planning process by specifically quantifying the service life of the city’s current and future primary water supply.     

Dust events and their influence on aerosol optical properties over Jaipur in Northwestern India

In this study, we systematically document the link between dust episodes and local scale regional aerosol optical properties over Jaipur located in the vicinity of Thar Desert in the northwestern state of Rajasthan. The seasonal variation of AOT_{500 nm} (aerosol optical thickness) shows high values (0.51?±?0.18) during pre-monsoon (dust dominant) season while low values (0.36?±?0.14) are exhibited during winter. The Ångström wavelength exponent has been found to exhibit low value (<0.25) indicating relative dominance of coarse-mode particles during pre-monsoon season. The AOT increased from 0.36 (April_mean) to 0.575 (May–June_mean). Consequently, volume concentration range increases from April through May–June followed by a sharp decline in July during the first active phase of the monsoon. Significantly high dust storms were observed over Jaipur as indicated by high values of single scattering albedo (SSA_{440 nm}?=?0.89, SSA_{675 nm}?=?0.95, SSA_{870 nm}?=?0.97, SSA_{1,020 nm}?=?0.976) than the previously reported values over IGP region sites. The larger SSA values (more scattering aerosol), especially at longer wavelengths, is due to the abundant dust loading, and is attributed to the measurement site’s proximity to the Thar Desert. The mean and standard deviation in SSA and asymmetry parameter during pre-monsoon season over Jaipur is 0.938?±?0.023 and 0.712?±?0.017 at 675 nm wavelength, respectively. Back-trajectory air mass simulations suggest Thar Desert in northwestern India as the primary source of high aerosols dust loading over Jaipur region as well as contribution by long-range transport from the Arabian Peninsula and Middle East gulf regions, during pre-monsoon season.     

The Impact of Local versus National Framing on Willingness to Reduce Greenhouse Gas Emissions: A case study from central Pennsylvania

This paper explores the impact of the frame in which people interpret global warming. In 1999, 637 respondents completed a mail survey in five counties in central Pennsylvania. Half of the sample received questionnaires that framed global warming in terms of the local impacts of mitigation policies, whereas the other half received questionnaires that framed global warming in terms of the national impacts of mitigation policies. The results show a statistically significant but small difference between the local and national frames in the respondents' willingness to support government policies, as well as to take voluntary actions to mitigate climate change.     

Applying adult emergence as an endpoint in a post-exposure laboratory test using two midge species (Diptera: Chironomidae)

Several approaches have been used to evaluate biological impairment in aquatic ecosystems which can be categorized as either laboratory or field. In the recent years, the laboratory toxicity test approach has been extended to field exposures where ambient factors are allowed to influence the test response. Field exposures of laboratory test organisms require method modifications. In this paper, a novel in situ method is described which measures growth, survival and emergence of sediment inhabiting insects (Diptera: Chironomidae) that are used in standardized laboratory toxicity testing. Two standard chironomid species (Chironomus riparius and Chironomus tentans) were used to test the suitability of the approach and to compare the performance of the species. The larvae were transferred to the laboratory for emergence after 7 days in situ exposure which was compared to laboratory responses. Growth, survival and emergence were significantly lower in the in situ pre-exposure than in the laboratory. Also, emergence success was significantly lower in one reference sediment (LMR) than in the other test sediments in both in situ and the laboratory treatment. These lower response levels likely resulted from sediment characteristics and artifacts related to the exposure in the in situ chamber. Feeding and water quality within the exposure chamber appear to be factors that may differ markedly from the laboratory exposure and may affect organism responses. C. riparius developed (growth, emergence time) faster than C. tentans in all treatments, otherwise the species responded similarly. C. riparius may be a better alternative for the chronic in situ exposures because of shorter exposure times and reduced feeding requirements.