Reclamation of the Urad molybdenum mine,Empire, Colorado

The Urad Mine, located at an elevation of 10,400 feet near the Continental Divide in central Colorado, was operated from 1967–1974 by AMAX Inc. Mine related activities disturbed approximately 234 acres, of which two tailing deposition areas comprised 121 acres. Comprehensive reclamation was initiated prior to mine closure in 1974 and was completed in 1980.Conventional revegetation techniques were implemented on typical disturbances while the tailing areas were reclaimed with the aid of three waste products. Mine waste rock was used to cap the tailing areas, and sewage and wood wastes were used to convert the rock into a rudimentary soil. The rock was revegetated and the vegetation is now permanent and selfsustaining.     

Some effects of century old abandoned lead mining operations on streams in Missouri,USA

Lead has been mined in the Old Lead Belt region of southeastern Missouri, USA since the early 1700s. Mining operations ceased totally in 1972. Since no other major industries were associated with the region, an investigation was initiated to study the long-term environmental effects of lead mining activities on the water quality sediments and biota otarea receiving streams. The principal study area was Flat River Creek,. which drained the major mining operations of the region. The findings of this study indicated the water of the lower Flat River Creek below the mining elevation contained elevated levels of lead, zinc, calcium and magnesium. The sediments and biota of the same stream area were also found to contain significantly higher levels of lead and zinc as well as copper and cadmium. Algae, crayfish and minnows were all found to have concentrated these metals. The studies indicated that some type of abandonment plan must be developed for the control and treatment of heavy metal pollution for mining operations on a continuing basis.     

Environmental Monotoring and Assessment Program: Current Status of Virginian Province (U.S.) Estuaries

Monitoring of indicators of the ecological condition of bays, tidal rivers, and estuaries within the Virginian Biogeographic Province (Cape Cod, Massachusetts to Cape Henry, Virginia) was conducted annually by the U.S. EPA's Environmental Monitoring and Assessment Program (EMAP) during the summer months of 1990 to 1993. Data were collected at 425 probability-based stations within the Province. Indicators monitored included water quality (temperature, salinity, water clarity, and dissolved oxygen concentration), sediment contamination, sediment toxicity, benthic community structure, fish community structure, and fish gross external pathology. Data were used to estimate the current status of the ecological condition of Virginian Province estuarine resources, and provide a baseline for identifying possible future changes. Estimates, with 95% confidence limits, of the areal extent of impacted resources within the Province are provided. Data are also presented by estuarine class (large estuaries, small estuarine systems, and large tidal rivers). Results show that, overall, approximately half of the estuarine waters of the Virginian Province can be classified as impacted based on multiple indicators, with hypoxia being the major stressor.     

Inventory compilation and distribution of heavy metals in wastewater from small-scale industrial areas of Delhi, India

Delhi has the highest cluster of small-scale industries (SSI) in India. There are generally less stringent rules for the treatment of waste in SSI due to less waste generation within each individual industry. This results in SSI disposing of their wastewater untreated into drains and subsequently into the river Yamuna, which is a major source of potable water in Delhi, thus posing a potential health and environmental risk to the people living in Delhi and downstream. To study the quantity, quality and distribution of heavy metals in liquid waste from industrial areas, wastewater, suspended materials and bed sediments were collected from industrial areas and from the river Yamuna in Delhi. This study has also focused on the efficiency of production processes in small-scale industries in India. Heavy metals such as Fe, Mn, Cu, Zn, Ni, Cr, Cd, Co and Pb were detected using a GBC 902 atomic absorption spectrometer. The concentration of heavy metals observed was as follows: Fe 2-212, Mn 0.3-39, Cu 0.2-20, Zn 0.2-5, Ni 0.6-6, Cr 0.2-53, Cd 0.08-0.2, Co 0.013-0.55, Pb 0.3-0.7 mg L(-1) in wastewater; Fe 5842-78 000, Mn 585-10 889, Cu 206-7201, Zn 406-9000, Ni 22-3621, Cr 178-10 533, Co 17-114, Cd 13-141, Pb 67-50 171 mg kg(-1) in suspended material; and Fe 3000-84000, Mn 479-1230, Cu 378-8127, Zn 647-4010, Ni 164-1582, Cr 139-3281, Co 20-54, Cd 37-65, Pb 228-293 mg kg(-1) in bed residues. This indicates that SSI could be one of the point sources of metals pollution in the river system.     

Monitoring global change: Comparison of forest cover estimates using remote sensing and inventory approaches

Satellite-based remote sensing offers great potential for frequent assessment of forest cover over broad spatial scales, however, calibration and validation using ground-based surveys are needed. In this study, forest cover estimates for the United States from a recently developed land surface cover map generated from satellite remote sensing data were compared to state-level inventory data from the U.S. National Resources Planning Act Timber Database. The land cover map was produced at the U.S. Geological Survey EROS Data Center and is based on imagery from the AVHRR sensor (spatial resolution 1.1 km). Vegetation type was classified using the temporal signal in the Normalized Difference Vegetation Index derived from AVHRR data. Comparisons revealed close agreement in the estimate of forest cover for extensively forested states with large polygons of relatively similar vegetation such as Oregon. Larger forest cover differences were observed in other states with some regional patterns in the level of agreement apparent.Comparisons in inventory- and remote sensing-based estimates of current forested area with potential vegetation maps indicated the magnitude of past land use change and the potential for future changes. The remote sensing approach appears to hold promise for conducting surveys of forest cover where inventory data are limited or where rates of vegetation change, due to human or climatic factors, are rapid.     

Use of historical assessment for evaluation of process-based model projections of future environmental change: Lake acidification in the Adirondack mountains, New York, USA

Because of the considerable uncertainties associated with modeling complex ecosystem processes, it is essential that every effort be made to test model performance prior to relying on model projections for assessment of future surface water chemical response to environmental perturbation. Unfortunately, long-term chemical data with which to validate model performance are seldom available. The authors present here an evaluation of historical acidification of lake waters in the northeastern United States, and compare historical changes in a set of lakes to hindcasts from the same watershed model (MAGIC) used to estimate future changes in response to acidic deposition. The historical analyses and comparisons with MAGIC model hindcasts and forecasts of acid-base response demonstrate that the acidic and low-ANC lakes in this region are responsive to strong acid inputs. However, the model estimates suggest lakewater chemistry is more responsive to atmospheric inputs of sulfur than do the estimates based on paleolimnological historical analyses. A 'weight-of-evidence approach' that incorporates all available sources of information regarding acid-base response provides a more reasonable estimate of future change than an approach based on model projections alone. The results of these analyses have important implications for predicting future surface water chemical change in response to acidic deposition, establishing critical loads of atmospheric pollutants, and other environmental assessment activities where natural variation often exceeds the trends under investigation (high noise-to-signal ratio). Under these conditions, it is particularly important to evaluate future model projections in light of historical trends data.     

Evaluation of the effectiveness of traffic calming measures on vehicle speeds and pedestrian injury severity in Ghana

Objectives: Each year, pedestrian injuries constitute over 40% of all road casualty deaths and up to 60% of all urban road casualty deaths in Ghana. This is as a result of the overwhelming dependence on walking as a mode of transport in an environment where there are high vehicular speeds and inadequate pedestrian facilities. The objectives of this research were to establish the (1) impact of traffic calming measures on vehicle speeds and (2) association between traffic calming measures and pedestrian injury severity in built-up areas in Ghana.

Method: Vehicle speeds were unobtrusively measured in 38 selected settlements, including 19 with traffic calming schemes and 19 without. The study design used in this research was a matched case–control. A regression analysis compared case and control casualties using a conditional logistic regression.

Results: Generally, the mean vehicle speeds and the proportion of vehicles exceeding the 50?km/h speed limit were significantly lower in settlements that have traffic calming measures compared to towns without any traffic calming measures. Additionally, the proportion of motorists who exceeded the speed limit was 30% or less in settlements that have traffic calming devices and the proportion who exceeded the speed limit was 60% or more in towns without any traffic calming measures. The odds of pedestrian fatality was significantly higher in settlements that have no traffic calming devices compared to those that have (odds ratio [OR]?=?1.98; 95% confidence interval, 1.09–4.43). The protective effects of a traffic calming scheme that has a speed table was notably higher than those where there were no speed tables.

Conclusion: It was clearly evident that traffic calming devices reduce vehicular speeds and, thus, the incidence and severity of pedestrian injuries in built-up areas in Ghana. However, the fact that they are deployed on arterial roads is increasingly becoming a road safety concern. Given the emerging safety challenges associated with speed calming measures, we recommend that their use be restricted to residential streets but not on arterial roads. Long-term solutions for improving pedestrian safety proposed herein include bypassing settlements along the highways to reduce pedestrians’ exposure to traffic collisions and adopting a modern way of enforcement such as evidence-based laser monitoring in conjunction with a punishment regime that utilizes the demerit points system.     

QUALITY STUDY OF GRAYWATER TREATMENT SYSTEMS1

ABSTRACT: A residential single family dwelling was retrofitted to recycle graywater for landscape irrigation and toilet flushing. The objective of this study was to determine improvements in graywater quality by evaluating five simple graywater treatment systems that were easily adapted to the household plumbing. The treatment systems consisted of (1) water hyacinths and sand filtration, (2) water hyacinths, copper ion disinfection, and sand filtration, (3) copper ion disinfection and sand filtration, (4) copper/silver ion disinfection and sand filtration, and (5) 20–μm cartridge filtration. Water quality parameters measured were fecal and total coliform indicator bacteria, nitrates, suspended solids, and turbidity. Reductions in bacterial concentration, suspended solids and turbidity were achieved by all systems tested. Treatment reduced nitrate concentrations to an average of 2.6 mg/liter. Reductions in suspended solids, and turbidity were influenced more by the quality of the graywater entering the treatment system than the efficiency of the systems themselves. The water hyacinths and sand filtration system provided the best graywater quality in terms of the concentrations of fecal indicator bacteria. The system providing the best water quality in regard to average suspended solids after treatment was the water hyacinths, copper ion, and sand filtration system, and the best average turbidity was achieved by the copper/silver ion generating unit with sand filtration. All systems were capable of significant reductions in fecal indicator bacteria, suspended solids, and turbidity; however, additional treatment or disinfection would be necessary to further reduce the level of coliform and fecal coliform bacteria to achieve regulatory standards in the State of Arizona.     

ASSESSING THE ECONOMIC BENEFITS OF GROUND WATER FOR ENVIRONMENTAL POLICY DECISIONS1

ABSTRACT: The full range of environmental and economic services of ground water need to be accounted for in policy decisions. Non-recognition of these services imputes a lower value for the ground water resource in establishing policies. We describe a conceptual framework for identifying and measuring the economic value of groundwater. The valuation framework links changes in physical characteristics of ground water to services provided by ground water and the economic effects of changes in ground water services. In addition to the framework, we develop a general protocol to follow for assessing the benefits of ground water policies. Application of the protocol will aid in establishing structure and consistency across policy assessments and improve the accuracy and completeness of benefit estimates, avoid double-counting problems, and eliminate duplication of ground water valuation efforts.     

Pollution source analyses using 1-dimensional time series

Lake Holiday, a human-made recreational lake in northern Illinois, was threatened with closure due to high bacterial levels. A factorially designed experiment with multivatiate responses was developed to study and identify the main sources of pollution. Data on total coliform, fecal coliform, fecal streptococci, dissolved oxygen, pH, ammonia-N, total phosphorus, nitrate/nitrite-N were analyzed using regression models describing dam spillway loads as a function of source loads and time. The results suggest that the relationships among source, time, and load are complex, even though only two sources account for most of the lake's loading Stevens Brook, which receives the discharge from the Somonauk Sewage Treatment Plant, and Somonauk Creek, which is the major drainage, contribute high loads of bacteria and nutrients to the lake. The influent loads contributed to the lake are discharged at the dam over about 4 weeks