SDG-based HAZOP analysis of operating mistakes for PVC process

As modern chemical plants are becoming more complex and bigger in scale, the associated chance of things going wrong is also increasing rapidly. Due to the flammable, explosive, toxic and corrosive nature of chemical process, any single accident may trigger a major catastrophe that brings tremendous environmental, social and economical loss. In order to prevent any accident from happening, hazard and operability (HAZOP) analysis has been brought in to monitor chemical process and provide early warning for signs of accident. However, most existing HAZOP is carried out manually, and there are always obstacles in terms of cost overrun and incompleteness of the analysis. To address the difficulties in current HAZOP method, this paper proposes a signed digraph (SDG)-based HAZOP analysis method. It is used to identify the most likely operating mistakes that may cause certain process variable deviating from its normal value, which is the main source of safety concern. A case study on polyvinyl chloride (PVC) plant is presented to demonstrate the effectiveness of SDG-based HAZOP analysis method in providing complete analysis result.     

Contamination status of dioxins in sediment cores from the Three Gorges Dam area, China

In order to screen dioxin pollution in sediment of Three Gorges Dam (TGD) area, three sediment cores were obtained from two sites in 2010~2011; each core was divided into different samples with every 10 cm depth. Sediment dating determined by radiometry (¹³⁷Cs, ²¹⁰Pb) and concentrations of dioxins were analyzed by high-resolution gas chromatography/mass spectrometry. The results indicated: Sediment dating showed no significant difference among all the samples from the same core and the two locations (ANOVA, p?>?0.05). The total amount of polychlorinated dibenzo-p-dioxins (PCDD)/Fs in all sample ranged from 30.7 to 371 pg/g dry weight (d.w.), with the mean value of 66.2 pg/g d.w. PCDDs occupied 60.33~85.22 % of dioxins in each sample, and PCDFs contributed to a very small extend. There was no significant difference in the dioxin concentration between 2010 and 2011 and in the two locations (t test, p?>?0.05), but the vertical distribution of dioxins showed significant different in different depths. Toxic equivalent (TEQ) (WHO 2005, Humans) of samples ranged from 0.15 to 1.60 pg/g d.w.; the mean was 0.41 pg/g d.w. No significant difference was found in TEQ between 2010 and 2011(t test, p?>?0.05). It could be concluded that the distribution of dioxins showed the spatial heterogeneous which resulted from the strong mixing and sediment deposition characteristics. Dioxin concentration in sediment cores was low with very low environmental risk potential. Dioxins at the two sites had the same origin, and exogenous input was the main source. It is the first report on the dioxins concentrations in sediment cores in the TGD area.     

Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.     

Effects of cadmium on forearm bone density after reduction of exposure for 10 years in a Chinese population

The main focus of this study was to evaluate long term effects of cadmium on forearm bone mineral density after stopping ingestion of cadmium-polluted rice for 10 years in a Chinese population. A total of 532 persons (338 women and 194 men), living in control, moderately and heavily polluted areas, were included in this study. The residents living in the polluted area ceased ingesting cadmium-polluted rice in 1996. All participants were require to answer a questionnaire and the bone mineral density (BMD) was measured by dual energy X-ray absorptiometry (DXA) at the proximal radius and ulna. Samples of urine and blood were collected for determination of cadmium in urine (UCd) and blood (BCd).The BMD of subjects living in the heavily polluted area was significantly lower than that of those living in control area in both men and women (p < 0.01). For the people living in the moderately polluted area, only the women's BMD was greatly lower compared to that in the control area (p < 0.05). The BMD declined with the increasing BCd and UCd in both sexes, especially in the highest level (BCd > 5 µg/L, UCd > 10 µg/g crea) groups (p < 0.01). It was found that there were significant differences in the prevalence of osteoporosis among the different areas (χ² = 13.046, p = 0.0003) and different UCd groups (χ² = 4.511, p = 0.0337) in women, but not in men (χ² = 0.962, p = 0.3268; χ² = 1.906, p = 0.1675). But a significant difference exists in the prevalence of osteoporosis among different BCd groups in both genders (χ² = 9.304, p = 0.00229, in women; χ² = 4603, p = 0.0319, in men). This study suggested that cadmium could play a long-term role on bone and more attention should be paid to cadmium effects on bone metabolism after reduction of exposure.     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Simple model for estimating dry deposition velocity of ozone and its destruction in a polluted nocturnal boundary layer

Determining the destructions of both ozone and odd oxygen, O_x, in the nocturnal boundary layer (NBL) is important to evaluate the regional ozone budget and overnight ozone accumulation. This work develops a simple method to determine the dry deposition velocity of ozone and its destruction at a polluted nocturnal boundary layer. The destruction of O_x can also be determined simultaneously. The method is based on O₃ and NO₂ profiles and their surface measurements. Linkages between the dry deposition velocities of O₃ and NO₂ and between the dry deposition loss of O_x and its chemical loss are constructed and used. Field measurements are made at an agricultural site to demonstrate the application of the model. The model estimated nocturnal O₃ dry deposition velocities from 0.13 to 0.19 cm s^?1, very close to those previously obtained for similar land types. Additionally, dry deposition and chemical reactions account for 60 and 40% of the overall nocturnal ozone loss, respectively; ozone dry deposition accounts for 50% of the overall nocturnal loss of O_x, dry deposition of NO₂ accounts for another 20%, and chemical reactions account for the remaining 30%. The proposed method enables the use of measurements made in typical ozone field studies to evaluate various nocturnal destructions of O₃ and O_x in a polluted environment.     

模拟黑水的生物处理

针对以糖蜜配制的半人工黑水生物处理时除磷效率下降和污泥膨胀的现象,利用序批式反应器(SBR)进行了实验分析,比较了以蔗糖和糖蜜为主要碳源时除磷效果的差异,并探讨了污泥膨胀发生的原因。研究表明,以糖蜜为主要碳源配制模拟黑水时的除磷效果比蔗糖为碳源时差,主要是由于GAOs的竞争性代谢所致。以糖蜜为碳源的条件下,污泥的胞外聚合物含量是正常活性污泥的一倍以上,导致污泥沉降性能变差;糖蜜碳源时的夏季高温条件下丝状菌大量生长也是导致污泥膨胀的重要原因。     

Inorganic Acid Emission Factors of Semiconductor Manufacturing Processes

Abstract

A huge amount of inorganic acids can be produced and emitted with waste gases from integrated circuit manufacturing processes such as cleaning and etching. Emission of inorganic acids from selected semiconductor factories was measured in this study. The sampling of the inorganic acids was based on the porous metal denuders, and samples were then analyzed by ion chromatography. The amount of chemical usage was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County according to the Taiwan Environmental Protection Agency regulation. The emission factor is defined as the emission rate (kg/month) divided by the amount of chemical usage (L/month). Emission factors of three inorganic acids (i.e., hydrofluoric acid [HF], hydrochloric acid [HQ], and sulfuric acid [H₂SO₄]) were estimated by the same method. The emission factors of HF and HCl were determined to be 0.0075 kg/L (coefficient of variation [CV] = 60.7%, n = 80) and 0.0096 kg/L (CV = 68.2%, n = 91), respectively. Linear regression equations are proposed to fit the data with correlation coefficient square (R²) = 0.82 and 0.9, respectively. The emission factor of H₂SO₄, which is in the droplet form, was determined to be 0.0016 kg/L (CV = 99.2%, n = 107), and its R² was 0.84. The emission profiles of gaseous inorganic acids show that HF is the dominant chemical in most of the fabricators.     

不同流量分配比对多级A/O工艺去除有机物及脱氮的影响

采用三级A/O工艺分段进水工艺处理低碳源生活污水,考察了进水流量分配比对系统去除有机物、硝化反硝化能力以及去除TN的影响。通过对水质指标沿程监测结果表明,不同流量分配比(4∶3∶3,5∶3∶2,6∶3∶1)对系统去除有机物及硝化效率影响不大,出水COD、氨氮分别均在30 mg/L、1 mg/L以下。但反硝化效果受流量分配比的影响较大,在流量比为5∶3∶2时,有效利用原水中碳源进行反硝化,反硝化效果最好。在流量比为5∶3∶2的情况下,TN出水为5.7 mg/L去除率为82.9%,优于流量分配比为6∶3∶1和4∶3∶3时的脱氮效果。总体而言,分段进水工艺在对碳源的有效利用及能耗节省方面优于单点进水。     

Even sampling designs generation by charges repulsion simulation

Evenly distributed sampling design is generally considered as an efficient sampling design. It is widely used in sampling for the environmental survey. In this paper, we present a novel method for generating N evenly distributed samples within a given irregular polygon via simulating the movements of some ideal homogeneous point charges. Initially, charges are randomly put into the sampling region; then, they are freed and held orderly; and after enough runs, the charges will finally reach a stable state with all of them having a zero resultant force and velocity; and so they distribute evenly within the region. Their layout can thus be considered as an evenly distributed sampling design. The main advantages of this method are: (1) it is easy to understand and implement; (2) it is efficient in both running and generating better designs. Analysis and experimental results indicate that this method is an efficient and robust method for generating even sampling designs for 2D polygonal sampling region.