Costa Rican Environmental Service Payments: The Use of a Financial Instrument in Participatory Forest Management

The core element of the Costa Rican forestry policy is a financial instrument called the environmental service payment. This instrument rewards forest owners for the environmental services (the mitigation of greenhouse gases, the protection of watersheds and scenic beauty, and the development of biodiversity) their forests provide. In this article, the experiences with this new instrument are analyzed by focusing on the way interests are represented and access is granted, the openness of information exchange, whether social learning occurred, and whether decision-making authority is shared. The analysis is based on a survey conducted in the Huetar Norte Region and on in-depth interviews with the major stakeholders. The Costa Rican case indicates that financial instruments can be used to share responsibilities and that stakeholders can successfully cooperate on forest issues. It also shows that such a participatory approach is only promising if certain cultural, economic, organizational, and political conditions are met.     

Dry and heat stress affects H2S production of Salmonella on selective plating media

The pH of Salmonella pre-enrichment media can become acidic (pH 4.0–5.0) when feeds/ingredients are incubated for 24?h. Salmonella in feed that have been stressed by heat and desiccation exhibit different pH tolerances than non-stressed cultures. Acidic conditions can result in cell injury/death and affect biochemical pathways. In this study, eight serotypes of Salmonella were grown in sterile meat and bone meal that was subjected to desiccation and heat stress. Cultures of non-stressed and stressed isolates were subsequently exposed to acidic pH from 4.0 to 7.0 in 0.5?pH increments (3 replicates/pH increment) in citrate buffer. At 6 and 24?h, serial dilutions were plated in duplicate on XLT-4 (xylose lysine tergitol-4) agar. Four serotypes showed an impaired ability to decarboxylate lysine on XLT-4. This inability to decarboxylate lysine was dependent on isolate, stress status, and incubation time. When the isolates’ ability to decarboxylate lysine was examined using biochemical tests, cultures were found to be able to decarboxylate lysine with the exception of S. Infantis. This suggests that XLT-4 contains a biochemical stressor(s) which affects the rate of decarboxylation by these Salmonella. These results suggest that acidic conditions may influence the detection and confirmation of Salmonella in feed.     

Air Quality Modeling Using the PSO-SVM-Based Approach,MLP Neural Network,and M5 Model Tree in the Metropolitan Area of Oviedo (Northern Spain)

The main aim of this study was to construct several regression models of air quality using techniques based on the statistical learning, in the metropolitan area of Oviedo, in northern Spain. In this research, a hybrid particle swarm optimization-based evolutionary support vector regression is implemented to predict the air quality from the experimental dataset (specifically, nitrogen oxides, carbon monoxide, sulfur dioxide, ozone, and dust) collected from 2013 to 2015 in the metropolitan area of Oviedo. Furthermore, a multilayer perceptron network (MLP) and the M5 model tree were also fitted to the experimental dataset for comparison purposes. Finally, the predicted results show that the hybrid proposed model is more robust than the MLP and M5 model tree prediction methods in terms of statistical estimators and testing performances.     

Partial characterization of the exopolysaccharide from Oscillatoria trichoides Szafer and the role of released polysaccharide in sequestration of Cr6+

The structural investigation and the chromium adsorptive potential of an exopolysaccharide (EPS) released during the growth of an indigenous cyanobacterium, Oscillatoria trichoides Szafer, were investigated in a laboratory‐scale study. The results showed that, of the total EPS produced, 410.53 milligrams/gram (mg g^?1) were released polysaccharides (RPS) and 11.36 mg g^?1 were capsular polysaccharides (CPS). The sorption of hexavalent chromium (Cr⁶⁺) by the RPS achieved a maximum amount of metal removal (q_max) value of 76.92 mg g^?1 of polysaccharide dry weight. The highest coefficient of determination (0.9742) for the Langmuir adsorption model indicates best fitness of the model in explaining the sorption as a unilayer process. Equilibrium studies indicated that 30 to 40 milligrams per liter initial chromium concentration and a pH of 2 were optimal for biosorption of chromium by the RPS. Scanning electron microscopy with energy‐dispersive X‐ray spectroscopy analysis of Cr⁶⁺‐treated RPS showed the presence of 3.76% bound chromium. Compositional analysis of the EPS showed the presence of carbohydrates, proteins, pyruvic acid, and hexosamines. High‐performance liquid chromatography analysis demonstrated the presence of hexoses, as neutral sugars and glucuronic acid as an acidic sugar. The presence of carboxylic groups was also detected by infrared spectroscopy. The presence of these chemical constituents may serve as binding sites for the metal ions; therefore, the RPS of this species appears to be a promising biosorbent for Cr⁶⁺.     

Effect of variations in the redox potential of Gleysol on barium mobility and absorption in rice plants

Two assays were designed to obtain information about the influence of redox potential variations on barium mobility and bioavailability in soil. One assay was undertaken in leaching columns, and the other was conducted in pots cultivated with rice (Oryza sativa) using soil samples collected from the surface of Gleysol in both assays. Three doses of barium (100,300 mg kg⁻¹ and 3000 mg kg⁻¹-soil dry weight) and two redox potential values (oxidizing and reducing) were evaluated. During the incubation period, the redox potential (Eh) was monitored in columns and pots until values of −250 mV were reached. After the incubation period, geochemical partitioning was conducted on the barium using the European Communities Bureau of Reference (BCR) method. Rainfall of 200 mm d⁻¹ was simulated in the columns and in the planting of rice seedlings in the pots. The results of the geochemical partitioning demonstrated that the condition of reduction favors increased barium concentrations in the more labile chemical forms and decreased levels in the chemical forms related to oxides. The highest barium concentrations in leached extracts (3.36 mg L⁻¹) were observed at the highest dose and condition of reduction at approximately five times above the drinking water standard. The high concentrations of barium in the soil did not affect plant dry matter production. The highest levels and accumulation of barium in roots, leaves, and grains of rice were found at the highest dose and condition of reduction. These results demonstrate that reduction leads to solubilization of barium sulfate, thereby favoring greater mobility and bioavailability of this element.     

Contribution of residential wood combustion to PM10 levels in Portugal

Wood is commonly used in residential combustion for heating purposes; however, it can be a major source of air pollutants, namely fine particles, volatile organic compounds and carbon monoxide. Since 2004, the PM10 daily limit value has been surpassed in Portugal, and the European Commission has stated that plans and programs must be designed in order to reduce these levels. In Portugal, 18% of PM10 emissions are due to residential wood combustion, which may deeply impact the PM10 levels in the atmosphere. The main aim of this study is to investigate the impact of residential wood combustion on the air quality in Portugal. The air quality modelling system MM5/CHIMERE was applied over Portugal for a winter month, for the following three scenarios: the reference scenario, considering the actual emissions of PM10; scenario 1, where residential wood combustion emissions are not considered; and scenario 2, which takes into account a complete conversion from traditional fireplaces to certified appliances (with a 90% reduction in PM emissions). The residential wood combustion contribution to PM10 air quality concentration values during January 2007 ranges from 0 to 14 μg m^?3, with a mean contribution of 10 μg m^?3 in the Lisboa area and 6 μg m^?3 in the Porto region. Concerning the legislated values, the area where the daily average limit value (50 μg m^?3) is exceeded decreases by 46% in the simulation when residential combustion is not considered. The modelling results for scenario 2 are not significantly different from those for scenario 1. In summary, the regulation of the residential wood combustion sector is as an effective way to reduce the PM10 levels in the atmosphere as regards air quality plans and programs.     

Sequential Extraction Versus Comprehensive Characterization of Heavy Metal Species in Brownfield Soils

The applicability of sequential extraction as a means to determine species of heavy-metals was examined by a study on soil samples from two Superfund sites: the National Lead Company site in Pedricktown, NJ, and the Roebling Steel, Inc., site in Florence, NJ. Data from a standard sequential extraction procedure were compared to those from a comprehensive study that combined optical- and scanning-electron microscopy, X-ray diffraction, and chemical analyses. The study shows that larger particles of contaminants, encapsulated contaminants, and/or man-made materials such as slags, coke, metals, and plastics are subject to incasement, non-selectivity, and redistribution in the sequential extraction process. The results indicate that standard sequential extraction procedures that were developed for characterizing species of contaminants in river sediments may be unsuitable for stand-alone determinative evaluations of contaminant species in industrial-site materials. However, if employed as part of a comprehensive, site-specific characterization study, sequential extraction could be a very useful tool.     

Impact of increased collection rates and the use of commingled collection systems on the quality of recovered paper. Part 1: increased collection rates

The recovery and utilization of recovered paper have increased over past decades all over the world due to economic, environmental, and social issues. However, it is well known that an extended recovered paper collection is detrimental to its quality, either by the exploitation of lower quality sources such as households, or the spreading of commingled systems instead of selective collection systems. The influence of these two factors was assessed by analyzing the quality of different recovered paper grades used as raw material in a mill located in Madrid (Spain) producing newsprint and light weight coated paper from recovered paper. Part 1 of the paper deals with the impact of increased collection rates on the quality of recovered paper and Part 2 with the use of commingled collection systems. Results of Part 1 show that increased collection rates have a large impact on the quality of the recovered paper. The quality, measured as total unusable material and moisture contents, had deteriorated very rapidly in only 4 years (2005–2008) as a consequence of increased collection rates. Collection rates increased in Spain from 58.5% to 68.6% during this period, resulting in more than 50% increase of total unusable material and 25% of moisture content. The downgrading of the quality of recovered paper is one of the major threats for extending the current limits of paper recycling. Therefore, future challenge is to increase its availability but maintaining its quality.     

Ecotourism as a development strategy: experiences from Costa Rica

This article reflects on the Costa Rican experiences with ecotourism by assessing the positive and negative environmental, economic and social impacts of ecotourism development at four tourist destinations—Manuel Antonio, Monteverde, Tortuguero and ASCOMAFOR. These destinations represent different stages of tourism development. The assessment shows that the development of ecotourism has a dilemma character. Compared to alternative land-use options, ecotourism remains a promising development strategy. However, it should be embedded in a broader process of capacity building.