荧蒽对大豆种子发芽的影响

针对国内外有关荧蒽(FLT)对种子萌发影响研究极少的现状,本文设置5个质量浓度(2,5,15,25,50 mg·L-1)的染毒组、1个空白对照组(0 mg·L-1)和1个助溶剂对照组(丙酮体积分数为1%),以大豆种子发芽率、发芽势、发芽指数、活力指数和幼苗长度为测量指标,探索性地研究了FLT对大豆种子萌发的毒性效应。结果表明:在浓度小于15 mg·L-1的FLT胁迫下,大豆发芽率与对照相比无显著差异,大于等于15 mg·L-1的FLT胁迫则显著抑制了发芽率(p0.05)。发芽势、发芽指数、活力指数则对FLT的胁迫作用更加敏感,当FLT浓度大于等于5 mg·L-1时呈显著降低(p0.05)。FLT对幼苗长度起抑制作用,且随浓度越高和处理时间增长,抑制作用逐渐增强。     

Multistep conversion of cresols by phenol hydroxylase and 2,3-dihydroxy-biphenyl 1,2-dioxygenase

A mulfistep conversion system composed of phenol hydroxylase （PHrND） and 2,3-dihydroxy-biphenyl 1,2-dioxygenase （BphCLA_4） was used to synthesize methylcatechols and semialdehydes from o- and m-cresol for the first time. Docking studies displayed by PyMOL predicted that cresols and methylcatechols could be theoretically transformed by this multistep conversion system~ High performance liquid chromatography mass spectrometry （HPLC-MS） analysis also indicated that the products formed from multistep conversion were the corresponding 3-methylcatechol, 4-methylcatechol, 2- hydroxy-3-methyl-6-oxohexa-2,4-dienoic acid （2- hydroxy-3-methyl-ODA） and 2-hydroxy-5-methyl-6-oxo- hexa-2,4-dienoic acid （2-hydroxy-5-methyl-ODA）. The optimal cell concentrations of the recombinant E. coli strain BL21 （DE3） expressing phenol hydroxylase （PHrND） and 2,3-dihydroxy-biphenyl 1,2-dioxygenase （BphCLA_4） and pH for the multistep conversion of o- and m-cresol were 4.0 （g-L-1 cell dry weight） and pH 8.0, respectively. For the first step conversion, the formation rate of 3- methylcatechol （0.29μmol·L-1·min-1·mg-1cell dry weight） from o-cresol was similarly with that ofmethylca- techols （0.28 μmol·L-1·min-1·mg-1 cell dry weight） from m-cresol by strain PHrND. For the second step conversion, strain BphCLA_4 showed higher formation rate （0.83 μmol·L-1·min-1·mg-1 cell dry weight） for 2-hydroxy-3-methyl- ODA and 2-hydroxy-5-methyl-ODA from m-cresol, which was 1.1-fold higher than that for 2-hydroxy-3-methyl- ODA （0.77 μmol·L-1·min-1·mg-1. mglcell dry weight） from ocresol. The present study suggested the potential application of the multistep conversion system for the production of chemical synthons and high-value products.     

A potentiometric cobalt-based phosphate sensor based on screen-printing technology

A potentiometric cobalt-based screen-pritning sensor was fabricated by electroplating cobalt on the surface of a screen-printing electrode as the sensitive layer for the determination of dihydrogenphosphate （H2PO4） in wastewater samples. The electrochemical performance of this sensor was fully examined to determine its detection calibration, detection limit, response time, selectivity, and interference with pH, various ions, and dissolved oxygen （DO）. The cobalt-based phosphate sensor showed a phosphate-selective potential response in the range of 10 5mol·L^-1 to 10^-1 mol^-1, yielding a detection limit of 3.16 × 10μmol·L^l and a slope of -37.51 mV·decade＇ in an acidic solution （pH 4.0） of H2PO4-. DO and pH were found to interfere with sensor responses to phosphate. Ultimately, the performance of the sensor was validated for detecting wastewater samples from the Xiaojiahe Waste- water Treatment Plant against the standard speetrophotometric methods for HzPO4 analysis. The discrepancy between the two methods was generally ＋5% （relative standard deviation）. Aside from its high selectivity, sensitivity, and stability, which are comparable with conventional bulk Co-wire sensors, the proposed phosphate sensor presents many other advantages, such as low price, compactness, ease of use, and the possibility of integration with other analytical devices, such as flow injectors.     

Application of k-means clustering to environmental risk zoning of the chemical industrial area

The homogeneous risk characteristics within a sub-area and the heterogeneous from one sub-area to another are unclear using existing environmental risk zoning methods. This study presents a new zoning method by determining and categorizing the risk characteristics using the k-means clustering data mining technology. The study constructs indices and develops index quantification models for environmental risk zoning by analyzing the mechanism of environmental risk occurrence. We calculate the source risk index, air risk field index, water risk field index, and target vulnerability of the study area with Nanjing Chemical Industrial Park using a 100 m - 100 m mesh grid as the basic zoning unit, and then use k-means clustering to analyze the environmental risk in the area. We obtain the optimal clustering number with the largest average silhouette coefficient by calculating the average silhouette coefficients of clustering at different k-values. The clustering result with the optimal clustering number is then used for the environmental risk zoning, and the zoning result is mapped using the geographic information system. The study area is divided into five sub-areas. The common environmental risk characteristics within the same sub-area, as well as the differences between sub- areas, are presented. The zoning is helpful in risk management and is convenient for decision makers to distribute limited resources to different sub-areas in the design of risk reducing intervention.     

Moving towards sustainable development: rhetoric,policy and reality of ecological agriculture in China

Past decades have witnessed the rise of sustainable agriculture movements throughout the world. In parallel with this international trend, ecological agriculture (with essential goals of food security, rural employment, poverty alleviation, natural resource management and environmental protection) has been advocated as a workable approach for the realization of sustainable agriculture in China. Two decades of ecological agricultural development have shown that it not only gained legitimacy at the senior policy level but also became a focus of scientific research in fields such as ecological economics, ecology, and agricultural and environmental sciences. However, this endeavour is hardly known in the West and little attention has been paid so far to examining the broader politico-economic and sociocultural contexts within which it has evolved. This paper attempts to provide a general review of the emerging background, development history, policy initiatives and recent tendencies of ecological agriculture. In addition, the extant problems and potential contributions of this alternative practice to China's sustainable agricultural development are discussed. The purpose of this study is to identify the gap between the policy rhetoric and practical implementation of Chinese ecological agriculture and therefore to facilitate its moving towards sustainable development.     

粉煤灰深度处理制药废水实验研究

Fenton是酸性条件下Fe2+催化H2O2生成强氧化性的.OH,但调节pH的过程中耗费大量的酸和碱,运行费用昂贵,故Photo-Fenton反应受到重视。维生素制药废水生化后含有大量难降解污染物,以低浓度、难生物降解的实际废水为对象进行深度处理实验,研究改性粉煤灰、H2O2及FeSO4.7H2O的投加量,反应时间等因素的影响和优化。     

碳纳米管负载的镍及其氧化物对高毒气体PH3的催化分解性能

采用沉积-沉淀法制备了均一负载于碳纳米管(CNTs)载体的金属Ni和NiO,将其应用于PH3催化分解反应.通过XRD、TEM、XPS、BET等一系列检测手段,对样品的相结构、形貌、组分和比表面积进行了表征.研究结果表明,反应过程中,Ni和NiO很快被磷化为高活性的金属磷化物NiP2,作为反应的活性相.在420℃温度下,两样品对PH3的催化分解率均可达到99.5%以上.将反应中原位生成的NiP2进行催化反应,较钝化-还原的处理方式更有利于样品催化性能的保持.     

Combination system of full-scale constructed wetlands and wetland paddy fields to remove nitrogen and phosphorus from rural unregulated non-point sources

Constructed wetlands (CWs) have been used effectively to remove nitrogen (N) and phosphorus (P) from non-point sources. Effluents of some CWs were, however, still with high N and P concentrations and remained to be pollution sources. Widely distributed paddy fields can be exploited to alleviate this concern. We were the first to investigate a combination system of three-level CWs with wetland paddy fields in a full scale to remove N and P from rural unregulated non-point sources. The removal efficiencies (REs) of CWs reached 57.3 % (37.4–75.1 %) for N and 76.3 % (62.0–98.4 %) for P. The CWs retained about 1,278 kg N ha^?1 year^?1 and 121 kg P ha^?1 year^?1. There was a notable seasonal change in REs of N and P, and the REs were different in different processing components of CWs. The removal rates of wetland paddy fields adopt “zero-drainage” water management according to local rainfall forecast and physiological water demand of crop growth reached 93.2 kg N ha^?1 year^?1 and 5.4 kg P ha^?1 year^?1. The rice season had higher potential in removing N and P than that in the wheat season. The whole combined system (0.56 ha CWs and 5.5 ha wetland paddy fields) removed 1,790 kg N year^?1 and 151 kg P year^?1, which were higher than those from CWs functioned alone. However, another 4.7-ha paddy fields were needed to fully remove the N and P in the effluents of CWs. The combination of CWs and paddy fields proved to be a more efficient nutrient removal system.     

Leaching of elements from flue dust produced in copper scrap smelting process

To understand the features and leaching characteristics of copper (Cu) scrap smelting dust and its potential risk to environment and humans, three types of smelting dust were sampled and investigated. The dust samples were collected from the dust captured by cyclone collector, panel cooler, and bag house in a typical Cu scrap smelting process of a factory in Guangxi of China. Zinc (Zn), Cu and lead (Pb) were the main elements of the samples of cyclone collector dust (CCD), panel cooler dust (PCD), and bag house dust (BHD). There were less arsenic (As), Pb and Cu in CCD than PCD and BHD, and PCD contained more manganese (Mn), nickel (Ni), and iron (Fe) than BHD. The particle shapes of BHD appeared more regular than CCD and PCD, and energy dispersive X-ray spectroscopy analysis illustrated the compositions of selected surface areas of three samples. The size of particles ranged from 0.011 to 33.11 μm in CCD, from less than 1 μm to several mm in PCD, and from 0.832 to 363.078 μm in BHD. The main elements in leachate were Zn and Mn from CCD, Zn, cadmium (Cd) and Pb from PCD, Zn, Mn and Cd from BHD. The leaching toxicity risk of Cd, Mn, and Zn of PCD and BHD was higher than CCD.