Decoupling of nonferrous metal consumption from economic growth in China

Nonferrous metal is an important basis material for the development of the national economy, and its consumption directly affects economic development. It has great significance in the effective utilization of nonferrous metals, development of an environment-friendly society, and investigation of the decoupling of nonferrous metal consumption and GDP growth. The decoupling indicators for nonferrous metal consumption and GDP growth (D _r) in China from 1995 to 2010 were calculated in this study, and the results were analyzed. A productive model based on BP neural network was established. Then, the decoupling indicators for nonferrous metal consumption and GDP growth in China for the period of 2011–2020 were predicted. For the period of 1995–2010, the annual average decoupling indicators were <1 for copper, aluminum, zinc, lead, and nickel, except for tin, which was 0.21. The analysis showed that the decoupling of nonferrous metal consumption and GDP growth is in a less optimistic situation to copper, aluminum, zinc, lead, and nickel in China from 1995 to 2010. The annual average decoupling indicator for tin was 0.21, which indicates relative decoupling. For the period of 2011–2020, the predicted decoupling indicators for copper, aluminum, zinc, lead, nickel, and tin were between 0 and 1. This finding indicates the implementation of relative decoupling. However, the total consumption of nonferrous metals did not decouple from GDP growth.     

Mechanism of the intermittent motion of two-phase debris flows

A typical two-phase debris flow exhibits a high and steep flow head consisting of rolling boulders and cobbles with intermittent or fluctuating velocity. The relative motion between the solid phase and the liquid phase is obvious. The motion of a two-phase debris flow depends not only on the rheological properties of the flow, but also on the energy transmission between the solid and liquid phases. Several models have been developed to study two-phase debris flows. An essential shortcoming of most of these models is the omission of the interaction between the two phases and identification of the different roles of the different materials in two-phase debris flows. The tracer particles were used for the velocity of solid phase and the velocity of liquid phase was calculated by the water velocity on the surface of the debris flow in the experiments. This paper analyzed the intermittent feature of two-phase debris flows based on videos of debris flows in the field and flume experiments. The experiments showed that the height of the head of the two-phase debris flow increased gradually in the initiation stage and reached equilibrium at a certain distance from the start of the debris flow. The height growth and the velocity of the flow head showed fluctuating characteristics. Model equations were established and the analyses proved that the average velocity of the two-phase debris flow head was proportional to the flood discharge and inversely proportional to the volume of the debris flow head.     

Application of treated wastewater and digested sewage sludge to obtain biodiesel from Helianthus annuus L. seeds oil

Waste from wastewater treatment plants (WWTP) for Helianthus annuus L. production may be a viable solution to obtain biodiesel. This study achieved two objectives: assess the agronomical viability of waste (wastewater and sludge) from the Alcázar de San Juan WWTP in central Spain for H. annuus L. production; use H. annuus L. seeds grown in this way to obtain biodiesel. Five study plots, each measuring 6 m × 6 m (36 m²), were set up on the agricultural land near the Alcázar de San Juan WWTP. Five fertilizer treatment types were considered: drinking water, as the control; treated wastewater; 10 t ha^?1 of air-dried sewage sludge; 20 t ha^?1 of air-dried sewage sludge; 0.6 t ha^?1 of commercial inorganic fertilizer. Soil, irrigation water, sewage sludge, crop development and fatty acid composition in achenes oil were monitored. The 20 t ha^–1 dose of sewage sludge proved effective to grow H. annuus L. with similar results to those grown with a commercial fertilizer. However, precautions should be taken when irrigating with wastewater because of high salinity and nutrient deficiency. Sunflower oil was composed mostly of linoleic and oleic acid. The remaining fatty acids were linolenic, estearic, nervonic, palmitoleic, and palmitic.     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

Optimization of bio-drying of kitchen waste: inoculation,initial moisture content and bulking agents

Journal of Material Cycles and Waste Management - Bio-drying has been proved to be a promising method for treatment of MSW (municipal solid waste) and sewage sludge due to its high energy...     

Differences in the Spatial Distribution and Chemical Composition of PM10 Between the UK and Poland

The Fine Resolution Atmospheric Multi-pollutant Exchange Model was used to calculate the spatial distribution and chemical composition of PM₁₀ concentrations for two geographically remote countries in Europe—the UK and Poland—for the year 2007. These countries are diverse in terms of pollutant emissions as well as climate conditions. Information on the contribution of natural and anthropogenic as well as national and imported particles in total PM₁₀ concentrations in both countries is presented. The paper shows that the modelled national annual average PM₁₀ concentrations, calculated for the entire country area, are similar for the UK and Poland and close to 12 μg m^?3. Secondary inorganic aerosols dominate the total PM₁₀ concentrations in Poland. Primary particulate matter has the greatest contribution to total PM₁₀ in the UK, with large contribution of base cations. Anthropogenic sources predominate (81 %) in total PM₁₀ concentrations in Poland, whereas natural prevail in the UK—hence, the future reduction of PM₁₀ air concentrations by emissions reduction could be more difficult in the UK than in Poland.     

Catalytic activities and mechanism of formaldehyde oxidation over gold supported on MnO<Subscript>2</Subscript> microsphere catalysts at room temperature

MnO₂ microspheres with various surface structures were prepared using the hydrothermal method, and Au/MnO₂ catalysts were synthesized using the sol-gel method. We obtained three MnO₂ microspheres and Au/MnO₂ samples: coherent solid spheres covered with wire-like nanostructures, solid spheres with nanosheets, and hierarchical hollow microspheres with nanoplatelets and nanorods. We investigated the properties and catalytic activities of formaldehyde oxidation at room temperature. Crystalline structures of MnO₂ are the main factor affecting the catalytic activities of these samples, and γ-MnO₂ shows high catalytic performance. The excellent redox properties are responsible for the catalytic ability of γ-MnO₂. The gold-supported interaction can change the redox properties of catalysts and accelerate surface oxygen species transition, which can account for the catalytic activity enhancement of Au/MnO₂. We also studied intermediate species. The dioxymethylene (DOM) and formate species formed on the catalyst surface were considered intermediates, and were ultimately transformed into hydrocarbonate and carbonate and then decomposed into CO₂. A proposed mechanism of formaldehyde oxidation over Au/MnO₂ catalysts was also obtained.     

Improvement of sludge dewaterability with modified cinder via affecting EPS

The relationship between the improvement of sludge dewaterability and variation of organic matters has been studied in the process of sludge pre-conditioning with modified cinder, especially for extracellular polymeric substances (EPS) in the sludge. During the conditioning process, the decreases of total organic carbon (TOC) and soluble chemical oxygen demand (SCOD) were obviously in the supernatant especially for the acid modified cinder (ACMC), which could be attributed to the processes of adsorption and sweeping. The reduction of polysaccharide and protein in supernatant indicated that ACMC might adsorb EPS so that the tightly bound EPS (TB-EPS) decreased in sludge. In the case of ACMC addition with 24 g·L^–1, SRF of the sludge decreased from 7.85 × 10¹² m·kg^–1 to 2.06 × 10¹² m·kg^–1, and the filter cake moisture decreased from 85% to 60%. The reconstruction of “floc mass” was confirmed as the main sludge conditioning mechanism. ACMC promoted the dewatering performance through the charge neutralization and adsorption bridging with the negative EPS, and provided firm and dense structure for sludge floc as skeleton builder. The passages for water quick transmitting were built to avoid collapsing during the high-pressure process.

Open image in new window