The Significance of Protected Areas for the Land Birds of Southern Finland

Protected areas (nature reserves) cover 0.7% of the land area in southern Finland (162,000 km²), which belongs to the south- and mid-boreal coniferous forest zones. The value of these areas in preserving land birds was studied on the basis of quantitative censuses. The numbers of bird pairs were estimated in nature reserves and in the whole of southern Finland, and the significance of the reserves was evaluated based on how large a proportion of the total population in southern Finland was found in them. Forest habitat generalists and species of coniferous forests occurred in protected areas as expected by the proportion of these areas in southern Finland. Specimens of these species groups comprise two thirds of all the country's land birds. Species of old-growth forests and open peatlands clearly preferred protected areas, whereas species of bushes, and lush and deciduous forest were scarcer in protected areas than elsewhere in southern Finland. The latter fertile habitats are poorly represented in protected areas, even though due to their disappearance or alteration elsewhere several species confined to these habitats have declined and are even threatened. Drainage of open peatlands and clearcutting of old-growth forests has caused a decrease in the area of these habitats in southern Finland during the past decades. Therefore, protected areas have a high significance in preserving bird species preferring these habitats. Protected areas are particularly important for decreased species of old-growth forests, such as the Three-toed Woodpecker Picoides tridactylus and the Siberian Jay Perisoreus infaustus , as about 10% of their total population in southern Finland was estimated to breed in protected areas. The future protection of both old-growth and deciduous forests is important if we are to preserve bio-diversity of land birds in Finland.     

Road pavers' occupational exposure to asphalt containing waste plastic and tall oil pitch

Waste plastic (WP) and tall oil pitch (T), which are organic recycled industrial by-products, have been used as a binder with bitumen in stone mastic asphalt (SMA) and asphalt concrete (AC). We compared the exposure over one workday in 16 road pavers participating in a survey at four paving sites, using mixes of conventional asphalt (SMA, AC) or mixes containing waste material (SMA-WPT, AC-WPT). The concentrations of 11 aldehydes in air were 515 and 902 microg m(-3) at the SMA-WPT and AC-WPT worksites, being 3 and 13 times greater than at the corresponding worksites laying conventional asphalt. Resin acids (2-42 microg m(-3)), which are known sensitizers, were detected only during laying of AC-WPT. The emission levels (microg m(-3)) of total particulates (300-500), bitumen fumes (60-160), bitumen vapour (80-1120), naphthalene (0.59-1.2), phenanthrene (0.21-0.32), pyrene (<0.015-0.20), benzo(a)pyrene (<0.01) and the sum of 16 PAHs (polycyclic aromatic hydrocarbons, 1.28-2.00) were similar for conventional and WPT asphalts. The dermal deposition of 16 PAHs on exposure pads (on workers' wrist) was low in all pavers (0.7-3.5 ng cm(-2)). Eight OH-PAH biomarkers of naphthalene, phenanthrene and pyrene exposures were quantified in pre- and post-shift urine specimens. The post-shift concentrations (mean +/- SD, micromol mol(-1) creatinine) of 1- plus 2-naphthol; 1-,2-,3-,4- plus 9-phenanthrol; and 1-hydroxypyrene were, respectively, for asphalt workers: 18.1+/- 8.0, 2.41 +/- 0.71 and 0.66+/- 0.58 (smokers); 6.0+/- 2.3, 1.70+/- 0.72 and 0.27+/- 0.15 (non-smokers); WPT asphalt workers: 22.0+/- 9.2, 2.82+/- 1.11 and 0.76+/- 0.18 (smokers); 6.8+/- 2.6, 2.35+/- 0.69 and 0.46+/- 0.13 (non-smokers). The work-related uptake of PAHs was low in all pavers, although it was significantly greater in smokers than in non-smokers. The WPT asphalt workers complained of eye irritation and sore throat more than the pavers who had a much lower exposure to aldehydes and resin acids.     

Ammonia stripping of biologically treated liquid manure

A prerequisite for efficient ammonia removal in air stripping is that the pH of the liquid to be stripped is sufficiently high. Swine manure pH is usually around 7. At pH 7 (at 20°C), only 0.4% of ammonium is in ammonia form, and it is necessary to raise the pH of swine slurry to achieve efficient ammonia removal. Because manure has a very high buffering capacity, large amounts of chemicals are needed to change the slurry pH. The present study showed that efficient air stripping of manure can be achieved with a small amount of chemicals and without strong bases like NaOH. Slurry was subjected to aerobic biological treatment to raise pH before stripping. This facilitated 8 to 32% ammonia removal without chemical treatment. The slurry was further subjected to repeated cycles of stripping with MgO and Ca(OH)(2) additions after the first and second strippings, respectively, to raise slurry pH in between the stripping cycles. After three consecutive stripping cycles, 59 to 86% of the original ammonium had been removed. It was shown that the reduction in buffer capacity of the slurry was due to ammonia and carbonate removal during the stripping cycles.     

Cost-effective forest conservation and criteria for potential conservation targets: a Finnish case study

Selecting reserves for forest biodiversity maintenance is often done by setting criteria for components of structural elements of biodiversity, such as a volume of decaying wood. We tested how the different threshold values for the components of structural elements affect the cost-effective site selection. Using Finnish National Forest Inventory information and remote sensing data, we determined a habitat quality index and economic value for each site in Satakunta region in Finland. Moreover, we defined several sets of potential conservation targets using alternative criteria for the habitat quality index developed for the Finnish case study. These figures were used in the site selection model in order to maximize the sum of habitat index of selected areas under a given budget constraint. We found that the production possibility frontier for the outputs of timber and biodiversity is only slightly concave when using the given threshold values. Thus, the optimal combination of the outputs is sensitive to the relative values of these goods. Our results suggest that an integrated approach in forest conservation could provide to environmental managers considerable cost savings compared with current management practices. Environmental managers could also reduce conservation costs by loosening the criteria for potential conservation targets. This would not lower considerably the quality of conserved forests.     

Toxicity of two types of silver nanoparticles to aquatic crustaceans Daphnia magna and Thamnocephalus platyurus

Although silver nanoparticles (NPs) are increasingly used in various consumer products and produced in industrial scale, information on harmful effects of nanosilver to environmentally relevant organisms is still scarce. This paper studies the adverse effects of silver NPs to two aquatic crustaceans, Daphnia magna and Thamnocephalus platyurus. For that, silver NPs were synthesized where Ag is covalently attached to poly(vinylpyrrolidone) (PVP). In parallel, the toxicity of collargol (protein-coated nanosilver) and AgNO₃ was analyzed. Both types of silver NPs were highly toxic to both crustaceans: the EC50 values in artificial freshwater were 15–17 ppb for D. magna and 20–27 ppb for T. platyurus. The natural water (five different waters with dissolved organic carbon from 5 to 35 mg C/L were studied) mitigated the toxic effect of studied silver compounds up to 8-fold compared with artificial freshwater. The toxicity of silver NPs in all test media was up to 10-fold lower than that of soluble silver salt, AgNO₃. The pattern of the toxic response of both crustacean species to the silver compounds was almost similar in artificial freshwater and in natural waters. The chronic 21-day toxicity of silver NPs to D. magna in natural water was at the part-per-billion level, and adult mortality was more sensitive toxicity test endpoint than the reproduction (the number of offspring per adult).     

A computationally feasible quantum chemical model for 13C NMR chemical shifts of PCB-derived carboxylic acids

Two quantum chemical models have been derived for the prediction of 13C NMR chemical shifts of novel PCB acids obtained from PCBs by catalytic carbonylation. 13C isotropic shielding constants were calculated employing the GIAO (gauge-independent atomic orbital) method with density functional theory (DFT). The best results were obtained by cluster calculations, which took the solvent effects into account properly. In this approach, a solvent molecule (acetone) was attached by a hydrogen bond to every hydrogen atom present in a PCB acid, and the geometry of the molecular cluster was optimized employing the AM1 method. For 158 chemical shifts, the cross-validated standard error was 2.8 ppm and the cross-validated correlation coefficient was 0.94.