C and N Content in Density Fractions of Whole Soil and Soil Size Fraction Under Cacao Agroforestry Systems and Natural Forest in Bahia,Brazil

Agroforestry systems (AFSs) have an important role in capturing above and below ground soil carbon and play a dominant role in mitigation of atmospheric CO₂. Attempts has been made here to identify soil organic matter fractions in the cacao-AFSs that have different susceptibility to microbial decomposition and further represent the basis of understanding soil C dynamics. The objective of this study was to characterize the organic matter density fractions and soil size fractions in soils of two types of cacao agroforestry systems and to compare with an adjacent natural forest in Bahia, Brazil. The land-use systems studied were: (1) a 30-year-old stand of natural forest with cacao (cacao cabruca), (2) a 30-year-old stand of cacao with Erythrina glauca as shade trees (cacao + erythrina), and (3) an adjacent natural forest without cacao. Soil samples were collected from 0-10 cm depth layer in reddish-yellow Oxisols. Soil samples was separated by wet sieving into five fraction-size classes (>2000 μm, 1000–2000 μm, 250–1000 μm, 53–250 μm, and <53 μm). C and N accumulated in to the light (free- and intra-aggregate density fractions) and heavy fractions of whole soil and soil size fraction were determined. Soil size fraction obtained in cacao AFS soils consisted mainly (65 %) of mega-aggregates (>2000 μm) mixed with macroaggregates (32–34%), and microaggregates (1–1.3%). Soil organic carbon (SOC) and total N content increased with increasing soil size fraction in all land-use systems. Organic C-to-total N ratio was higher in the macroaggregate than in the microaggregate. In general, in natural forest and cacao cabruca the contribution of C and N in the light and heavy fractions was similar. However, in cacao + erythrina the heavy fraction was the most common and contributed 67% of C and 63% of N. Finding of this study shows that the majority of C and N in all three systems studied are found in macroaggregates, particularly in the 250–1000 μm size aggregate class. The heavy fraction was the most common organic matter fraction in these soils. Thus, in mature cacao AFS on highly weathered soils the main mechanisms of C stabilization could be the physical protection within macroaggregate structures thereby minimizing the impact of conversion of forest to cacao AFS.     

Different compensatory mechanisms in two metal-accumulating aquatic macrophytes exposed to acute cadmium stress in outdoor artificial lakes

Mechanisms underlying cadmium (Cd) detoxification were compared in two aquatic macrophytes commonly used in phytoremediation, namely Pistia stratiotes L. and Eichhornia crassipes (Mart.) Solms. To simulate Cd pollution in the open environment, plants growing in outdoor artificial lakes were exposed for 21d to either 25 or 100microM Cd, in two consecutive years. Toxicity symptoms were absent or mild in both species. Metal accumulation was much higher in the roots of P. stratiotes, whereas in E. crassipes a comparatively higher fraction was translocated to the leaves. In both species, Cd was neither included in phenolic polymers or Ca-oxalate crystals, nor altered the levels of Cd-complexing organic acids. Glutathione levels were constitutively remarkably higher and much more responsive to Cd exposure in P. stratiotes than in E. crassipes. Abundant phytochelatin synthesis occurred only in P. stratiotes, both in roots and in leaves. In E. crassipes, on the other side, the constitutive levels of some antioxidant enzymes and ascorbate were higher and more responsive to Cd than in P. stratiotes. Thus, in these two aquatic plants grown in the open, different detoxification mechanisms might come into play to counterbalance Cd acute stress.     

Use of sugarcane filter cake and nitrogen,phosphorus and potassium fertilization in the process of bioremediation of soil contaminated with diesel

This study evaluated the use of sugarcane filter cake and nitrogen, phosphorus and potassium (NPK) fertilization in the bioremediation of a soil contaminated with diesel fuel using a completely randomized design. Five treatments (uncontaminated soil, T1; soil contaminated with diesel, T2; soil contaminated with diesel and treated with 15 % (wt) filter cake, T3; soil contaminated with diesel and treated with NPK fertilizer, T4; and soil contaminated with diesel and treated with 15 % (wt) filter cake and NPK fertilizer, T5) and four evaluation periods (1, 60, 120, and 180 days after the beginning of the experiment) were used according to a 4?×?5 factorial design to analyze CO₂ release. The variables total organic carbon (TOC) and total petroleum hydrocarbons (TPH) remaining in the soil were analyzed using a 5?×?2 factorial design, with the same treatments described above and two evaluation periods (1 and 180 days after the beginning of the experiment). In T3 and T5, CO₂ release was significantly higher, compared with the other treatments. Significant TPH removal was observed on day 180, when percent removal values were 61.9, 70.1, 68.2, and 75.9 in treatments T2, T3, T4, and T5, respectively, compared with the initial value (T1).     

Non-electrostatic surface complexation models for protons and lead(II) sorption onto single minerals and their mixture

Potentiometric titrations and lead sorption tests were conducted using muscovite, clinochlore, hematite, goethite, quartz, and a mixture of these same minerals. Mechanistic models were developed to represent and interpret these data. The aim was isolating the specific contribution of each mineral in proton and lead binding. Acid-base properties of each single mineral as well as their mixture were represented by discrete models, which consider the dissociation of n monoprotic sites (n-site/n-K(H) models). A one-site/one-K(H) model (logK(H1) = 10.69) was chosen for quartz (dissociation of SiOH edge hydroxyl groups). Goethite and hematite (FeOH groups) were represented by the same one-site/one-K(H) model (logK(H1) = 10.35). Three-site/three-K(H) models were used for muscovite (logK(H1) = 4.18; logK(H2) = 6.65; logK(H3) = 9.67) and clinochlore (logK(H1) = 3.84; logK(H2) = 6.57; logK(H3) = 9.71) assuming that SiOH and AlOH of the aluminosilicate matrix dissociate in the acid-neutral pH range while SiOH groups of quartz inclusions dissociate in the basic range. Similarly, the mixture of these minerals was represented by a three-site/three-K(H) model (logK(H1) = 3.39; logK(H2) = 6.72; logK(H3) = 10.82). According to crossed comparisons with single minerals, the first two sites of the mixture were associated with the aluminosilicate matrix (SiOH and AlOH respectively) and the third site with iron oxides (FeOH) and quartz groups. Additivity of proton binding in the mixture was demonstrated by simulating the mixture's titration curve. A unified model for the entire set of titration curves (single minerals and mixture) was also developed introducing a three-peak distribution function for proton affinity constants. Experimental data for lead sorption onto the mixture and individual minerals in 3-5 pH range denoted the competition between protons and metallic ions. The entire set of lead isotherms (individual mineral and mixture data) was represented adequately by a unified model taking into account both monodentate and bidentate complexes with the three active sites (additivity of lead binding). Experimental data of metal distribution in solid and liquid phases were successfully simulated by implementing the protonation and the surface complexation constants into the database of a dedicated software for chemical equilibria.     

Effect of aging on catalytic properties in mechanochemical degradation of pentachlorophenol by birnessite

Mechanochemistry, a technique concerning with milling contaminated samples for prolonged times, induces massive degradation of pollutants by grinding them in ball mills with different soil components or additives. In the present study, laboratory experiments were conducted to evaluate the effect of aging on the mechanochemical efficiency of the Mn-oxide birnessite in degrading pentachlorophenol (PCP). A comparative study on an aged birnessite (KBiA), used after 3 years from synthesis, and a fresh birnessite (KBiF), employed immediately after synthesis, was carried out. The differences between the two birnessites, evidenced by spectroscopic and diffractometric techniques, are mainly relative to reduction of the Mn(IV) centered at the MnO₆ octahedra layers from the birnessite structure, which represent the most reactive sites for PCP degradation. The long term air drying at room temperature, by favouring reduction of Mn(IV) to Mn(III), produces an inorganic substrate that offers paucity of the less reactive sites for PCP degradation, thus reducing the oxidative potential of the KBiA. Accordingly, the more reactive fresh birnessite was employed in the experiment with a polluted soil. Adding a small amount of KBiF to soil only induces a light increase in PCP removal, probably due to the mechanically induced PCP adsorption and transformation onto clay minerals present in the soil. Besides, adding a higher dose of birnessite causes a stronger degradation of PCP.     

Lysosomal,genetic and chromosomal damage in haemocytes of the freshwater bivalve (Unio pictorum) exposed to polluted sediments from the River Cecina (Italy)

The response to chemical disturbance of an Italian river (Cecina River) characterised by high levels of trace metals was assessed in the sentinel species freshwater painter’s mussel (Unio pictorum). We exposed U. pictorum in the laboratory to metal, metalloid and other trace element polluted river sediments in order to evaluate genetic and cellular biomarkers. Bivalves exposed to sediments taken from all the impacted sites of the river basin exhibited a significant impairment at the DNA, chromosomal and lysosomal levels. The lysosomal membrane stability of circulating haemocytes, assessed by the Neutral Red Retention Time, was found to be higher in specimens from Lake Maggiore and Berignone, while exhibited a significant decrease in specimens exposed to Ponteginori sediments. An increase of DNA migration in specimens exposed to the two contaminated sites in comparison with controls was found. Moreover, higher micronucleated haemocytes frequencies were observed in bivalves exposed to sediments collected at Possera 1 site. This study suggested that biomarkers evaluating cellular impairment, genetic and chromosomal damages, are highly sensitive and suitably applied to laboratory experiments. The painter’s mussel was confirmed to be an appropriate sentinel species for quality assessment in metal-contaminated freshwater environments.     

Sustainability considerations in remediation,retrofit, and seismic upgrading of historic masonry structures

This paper addresses the problem of sustainability in remediation, retrofit, and seismic upgrading of historic masonry structures. Different rehabilitation techniques and some successful applications throughout the Balkans and Italy are described, with particular emphasis to the shear reinforcement of wall panels. The selected techniques aim at improving the seismic performance, preserving the structures for future generations, having the least impact in altering the architectural and heritage values, as well as being sustainable, in terms of reduced carbon dioxide emissions, reversibility, and low energy consumption. The use of cross-laminated timber (CLT), natural fibers, and fiber-reinforced Polymers (FRP) jacketing with natural lime coatings are discussed. The paper concludes by summarizing key successes of the proposed rehabilitation solutions in conservation engineering and suggests areas in which these could be used with great advantage.

     

Poly(lactic acid)/Cellulose Composites Obtained from Modified Cotton Fibers by Successive Acid Hydrolysis

This work is focused on the hydrolysis of cotton fibers from waste textiles to obtain micro and nanofibers to be used as reinforcements in polymer composites. To promote their compatibility with polymeric matrix, hydrolyzed cotton fibers were surface modified with various silane compounds. Thus, these fibers were mixed with commercial poly(lactic acid) (PLA) at 5% w/w loading by melt compounding. Acid treatments caused a decrease of the crystallinity index whereas the thermal stability was significantly improved, especially for cellulose fibers hydrolyzed in two steps. Morphological analysis revealed a reduction of the fibers diameter and a decrease of their length as a consequence of the hydrolysis. NMR analysis confirmed the silanization of the fibers by reaction with the silane agent. Tensile tests revealed that silanization treatments were able to increase the composite Young’s modulus and the stress at break with respect to the neat matrix, indicating that silanization improved the polymer/fiber compatibility interfacial adhesion. The overall results demonstrated that applying suitable surface modification strategies, waste cotton textiles can be effectively recycled as fillers in polymer based composites.