When performed without technical criteria, the rapid expansion of irrigated agricultural frontiers can result in overexploitation of water, causing worrying impacts on the balance of agroecosystems. This study proposes a model applied to the state of Bahia, to estimate the water demand of areas irrigated by a central pivot, in order to contribute to information that will subsidize the inspection and planning of water resources in the promotion of sustainable agriculture. The irrigated areas were identified and measured by photointerpretation using orbital images from the Landsat-8 satellite. With a historical series of data, the reference evapotranspiration was calculated and monthly water balance was elaborated. The data obtained were spatialized by kriging, and with punctual values of water deficit (mm), the water demand of the irrigated perimeter of the equipment was estimated. The results were described considering strategic planning units, proposed from municipalities, hydrographic basins and biomes. A total of 4075 pivots were quantified, covering an irrigated area of 265,896.30 ha and with an average annual consumption of 1,333,473,208.02 m3 of water. Areas of high demand were identified, especially in the western region of Bahia, which includes the hydrographic basin of the São Francisco River and the Cerrado biome, concentrating 80.85% and 75.47% of the state water demand for pivots, respectively. Considering possible points of water vulnerability and continuity of this expansion, the results provide the primary information needed to encourage the adoption of public policies aimed at the management of water resources. The study method proposes guidelines that condition the application in any region of interest in the world.
Journal of Polymers and the Environment - The aim of this study was to investigate the effect of polar and aprotic solvents when used as solvents separately on the antimicrobial activity of nascent... 相似文献
Journal of Polymers and the Environment - The chitosan (Ch)—bentonite (B) composite was synthesized and its adsorption properties were investigated for lead ions. The characterization of the... 相似文献
Environmental Science and Pollution Research - Pteridium aquilinum (Dennstaedtiaceae) colonization affects ecological and restoration processes. The knowledge of the impacts on the ecological... 相似文献
Food and Environmental Virology - Rural environments lack basic sanitation services. Facilities for obtaining water and disposing sewage are often under the initiative of each resident, who may not... 相似文献
To date, heavyweight concretes have been produced from various heavy aggregates as radiation insulation materials, and their gamma ray absorption levels have been investigated. Many of the studies have used heavy aggregates instead of cement or coarse aggregates from composite material components. The present study prepared lightweight concretes using copper mine tailings, clay brick dust, and fly ash instead of fine aggregates. Some mechanical tests (density, compressive strength, and ultrasonic pulse velocity) were performed on composite blocks with dimensions of 5*5*5 cm, and radiation interaction parameters [linear absorption coefficient (cm−1), mass attenuation coefficient (cm2/gr), HVL (half-value layer) (cm), MFP (cm), and permeability (%)] were measured. Radiation interaction parameters were obtained using a HPGe gamma detector. Radiation measurements were performed at five different photon energies: 583 keV (133Ba), 609 keV (133Ba), 662 keV (137Cs), 911 keV (133Ba), 1173 keV (60Co), and 1332 keV (60Co). Additionally, the compressive strength and UPV values of composite materials were associated with their gamma ray permeability. Tests revealed that samples with the addition of copper mine tailings yielded the best energy absorption at all energy levels and that absorption decreased as the energy level increased. For example, with the increasing of the energy level, mass attenuation coefficients decreased. The highest mass attenuation coefficients were obtained as 0.128 cm2/g at an energy level of 583 keV in composites produced from copper mine tailings. On the other hand, it was measured at the same energy level as 0.069 cm2/g (a 46% decrease) in the composites produced with fly ash. In addition, it was observed that fly ash used as a fine aggregate did not have a significant effect on mass attenuation coefficient and could be used as a gamma shield if the material thickness was increased to an average of 14 cm. This study revealed that tailings materials could be used as radiation shields. This study also demonstrated that not using heavy aggregates and producing lightweight concrete in radiation shield production significantly reduced shield production cost.
Journal of Material Cycles and Waste Management - Leakage modeling can be crucial for environmental management and control of waste landfills. However, defining boundary conditions for these models... 相似文献
Environmental Science and Pollution Research - There are a few data relating to the effects of lead (Pb) exposure on the alveolar bone, which has very distinct morphophysiological characteristics... 相似文献
Journal of Material Cycles and Waste Management - Sewage sludge (SS) is a residue resulting from wastewater treatment, which is widely increasing due to population growth and economic development.... 相似文献
