Aluminum water treatment residuals as permeable reactive barrier sorbents to reduce phosphorus losses

Two aluminum water treatment residuals (Al-WTRs) from water treatment plants in Manatee County, FL and Punta Gorda, FL were evaluated as potential permeable reactive barrier (PRB) media to reduce groundwater phosphorus (P) losses. Short-term (<24 h) P sorption kinetics and long-term P sorption capacity were determined using batch equilibration studies. Phosphorus desorption was characterized following P loadings of 10, 20, 30, 40 and >70 g kg⁻¹. Sorption and desorption studies were conducted on the <2.0 mm material and three size fractions within the <2.0 mm material. The effect of dissolved organic carbon (DOC) on P retention was determined by reacting Al-WTRs with P-spiked groundwater samples of varying initial DOC concentrations. Phosphorus sorption kinetics were rapid for all size fractions of both Al-WTRs (>98% P sorption effectiveness at shaking times ?2 h). The effect of DOC was minimal at <150 mg DOC L⁻¹, but modest reductions (<22%) in P sorption effectiveness occurred at 587 mg DOC L⁻¹. The P sorption capacities of the Manatee and Punta Gorda Al-WTRs (<2.0 mm) are ∼44 g kg⁻¹ and >75 g kg⁻¹, respectively, and the lifespan of an Al-WTR PRB is likely many decades. Desorption was minimal (<2% of the P sorbed) for cumulative P loadings <40 g kg^-l, but increased (<9% of the P sorbed) at cumulative P loads >70 g kg⁻¹. The <2.0 mm Manatee and Punta Gorda Al-WTRs are regarded as ideal PRB media for P remediation.     

Elucidation of ecosystem attributes of an oligotrophic lake in Hokkaido,Japan, using Ecopath with Ecosim (EwE)

The fishing practices in the oligotrophic Lake Toya, Hokkaido, Japan, have profound implications in the ecosystem sustainability. The status of the sockeye salmon (Oncorhynchus nerka) population has become a serious concern among the lake managers and policy makers during the last decades. While the decline of the sockeye salmon population has been well documented in Lake Toya, there is considerable uncertainty with regards to the impact on the broader system dynamics. In this study, our objective is to address this knowledge gap by undertaking a synthesis of the Lake Toya food web using the mass-balance modeling software Ecopath with Ecosim (EwE). Our primary research question is to examine the repercussions of the declining sockeye salmon population on the trophic dynamics of the lake. Namely, we assess if there are any competing species that might have benefited from the decrease of sockeye salmon standing biomass and to what extent do these changes propagate through the Lake Toya food web? Our analysis pinpoints the critical role of the Japanese smelt (Hypomesus transpacificus nipponensis) in the system, which demonstrates a wide range of effects on several functional groups at both higher and lower trophic levels in Lake Toya. In particular, being a substantial portion of the masu salmon (Oncorhynchus masou) and adult sockeye salmon diets, the Japanese smelt has a positive impact on the top predators of the system. Amphipods, insects, and shrimp strongly benefit from the autochthonous and allochthonous organic matter in the system, while the tight coupling between phytoplankton and zooplankton seems to be particularly critical for the integrity of the Lake Toya food web. Whereas the values of the different ecosystem attributes (e.g., primary production/biomass, biomass/total throughput, system omnivory index, amount of recycled throughput, Finn's cycling index) provide evidence that Lake Toya is an immature system, we note that the internal redundancy and the system overhead estimates suggest that the lake possesses substantial reserves to overcome external perturbations. We also examined the effects of a variety of fishing policies on the biomass of masu salmon and adult sockeye salmon, which verify the belief that the adult sockeye population is quite fragile with high likelihood to collapse. Our analysis also predicts that sockeye will not rebound unless the fishing pressure exerted is substantially reduced (>50% of the reference levels used). Masu salmon seems to benefit under all the scenarios examined indicating that the intensity of the current fishing activities is significantly lower than its biomass accumulation rate in the system.     

Particulate emissions from U.S. Department of Defense artillery backblast testing

There is a dearth of information on dust emissions from sources that are unique to the U.S. Department of Defense testing and training activities. However, accurate emissions factors are needed for these sources so that military installations can prepare accurate particulate matter (PM) emission inventories. One such source, coarse and fine PM (PM10 and PM2.5) emissions from artillery backblast testing on improved gun positions, was characterized at the Yuma Proving Ground near Yuma, AZ, in October 2005. Fugitive emissions are created by the shockwave from artillery pieces, which ejects dust from the surface on which the artillery is resting. Other contributions of PM can be attributed to the combustion of the propellants. For a 155-mm howitzer firing a range of propellant charges or zones, amounts of emitted PM10 ranged from -19 g of PM10 per firing event for a zone 1 charge to 92 g of PM10 per firing event for a zone 5. The corresponding rates for PM2.5 were approximately 9 g of PM2.5 and 49 g of PM2.5 per firing. The average measured emission rates for PM1o and PM2.5 appear to scale with the zone charge value. The measurements show that the estimated annual contributions of PM10 (52.2 t) and PM2.5 (28.5 t) from artillery backblast are insignificant in the context of the 2002 U.S. Environment Protection Agency (EPA) PM emission inventory. Using national-level activity data for artillery fire, the most conservative estimate is that backblast would contribute the equivalent of 5 x 10(-4) % and 1.6 x 10(-3)% of the annual total PM10 and PM2.5 fugitive dust contributions, respectively, based on 2002 EPA inventory data.     

Techniques for High-Quality Ambient Coarse Particle Mass Measurements

ABSTRACT

Several recent studies have shown associations between ambient concentrations of particle mass (PM) and rates of morbidity and mortality in the general population. These studies have raised the issue of quality of coarse mass (CM, PM between 2.5 and 10 µm) data used for these purposes. CM data may have precision three or more times worse than the associated PM _2.5 or PM₁₀ data, depending on the measurement method, PM _2.5 to PM ₁₀ ratios, and CM concentrations. CM is measured either as the difference between collocated _PM10 and _PM2.5 samplers or more directly with a dichotomous (virtual impactor) sampler. CM precision for the difference method is degraded due to the increased errors inherent with using the difference between two independent measurements, as well as the high PM_2.5 to PM₁₀ ratios (and low CM concentrations) typical of the eastern United States. The dichotomous sampler (dichot) makes a more direct measurement of CM, but there is a potential for significant postexposure loss of particles from unoiled CM dichot filters, as well as uncertainties in the dichot’s CM channel enrichment factor. Compared to the dichot, low-volume inertial impactor samplers such as the Harvard Impactor (HI) or PM2.5 Federal Reference Method (FRM) are simpler to operate and maintain, provide sharper cut points, and do not require oiled filters to prevent loss of CM from the filter during transport. With the recent interest in CM spatial and temporal variability with respect to PM health effects, we have developed modifications to the HI PM method to provide measurements of 24-hour PM with estimated CM precision of better than 5% CV and r² higher than 0.95, primarily by lowering field blank variability and increasing gravimetric analytical precision. These high-precision PM techniques are not limited to the HI sampler; they can also be applied to the _PM2.5 FRM sampler. The measurement methods described here can be applied to future PM studies to avoid the potential problems with exposure assessment caused by CM measurements that have poor precision.     

Allocating Remedial Costs at Superfund Sites with Commingled Groundwater Contaminant Plumes

Remedial efforts at Superfund sites across the country focus on groundwater contaminant plumes that have been produced by contributions from multiple parties. Allocating cleanup costs between the parties in a fair and equitable manner can be a problem of substantial complexity. Considerable time and money may be spent determining the amount of contamination attributable to each party in order to apportion liability. Contaminant plumes that have evolved over long periods of time may affect large volumes of groundwater and require extensive remediation. Pump and treat remedial costs are driven by both the volume of water extracted and the mass of contaminants removed. Allocation methods based solely on the mass of contaminants contributed by each party are inadequate in this setting since they do not account for both components of the remedial costs. This paper presents an approach for equitably allocating remedial costs when addressing overlapping or commingled groundwater plumes. The method accounts for the major elements driving the costs of remediating dispersed contaminant plumes.