Land use and land cover (LULC) of the Republic of the Maldives: first national map and LULC change analysis using remote-sensing data

The Maldives islands in recent decades have experienced dramatic land-use change. Uninhabited islands were turned into new resort islands; evergreen tropical forests were cut, to be replaced by fields and new built-up areas. All these changes happened without a proper monitoring and urban planning strategy from the Maldivian government due to the lack of national land-use and land-cover (LULC) data. This study aimed to realize the first land-use map of the entire Maldives archipelago and to detect land-use and land-cover change (LULCC) using high-resolution satellite images and socioeconomic data. Due to the peculiar geographic and environmental features of the archipelago, the land-use map was obtained by visual interpretation and manual digitization of land-use patches. The images used, dated 2011, were obtained from Digital Globe’s WorldView 1 and WorldView 2 satellites. Nine land-use classes and 18 subclasses were identified and mapped. During a field survey, ground control points were collected to test the geographic and thematic accuracy of the land-use map. The final product’s overall accuracy was 85%. Once the accuracy of the map had been checked, LULCC maps were created using images from the early 2000s derived from Google Earth historical imagery. Post-classification comparison of the classified maps showed that growth of built-up and agricultural areas resulted in decreases in forest land and shrubland. The LULCC maps also revealed an increase in land reclamation inside lagoons near inhabited islands, resulting in environmental impacts on fragile reef habitat. The LULC map of the Republic of the Maldives produced in this study can be used by government authorities to make sustainable land-use planning decisions and to provide better management of land use and land cover.     

Effects of ammonia from livestock farming on lichen photosynthesis

This study investigated if atmospheric ammonia (NH₃) pollution around a sheep farm influences the photosynthetic performance of the lichens Evernia prunastri and Pseudevernia furfuracea. Thalli of both species were transplanted for up to 30 days in a semi-arid region (Crete, Greece), at sites with concentrations of atmospheric ammonia of ca. 60 μg/m³ (at a sheep farm), ca. 15 μg/m³ (60 m from the sheep farm) and ca. 2 μg/m³ (a remote area 5 km away). Lichen photosynthesis was analysed by the chlorophyll a fluorescence emission to identify targets of ammonia pollution. The results indicated that the photosystem II of the two lichens exposed to NH₃ is susceptible to this pollutant in the gas-phase. The parameter PI_ABS, a global index of photosynthetic performance that combines in a single expression the three functional steps of the photosynthetic activity (light absorption, excitation energy trapping, and conversion of excitation energy to electron transport) was much more sensitive to NH₃ than the F_V/F_M ratio, one of the most commonly used stress indicators.     

Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Socioeconomic development and vulnerability to land degradation in Italy

In recent years, the surface area affected by land degradation (LD) has significantly increased in southern European regions where the socioeconomic development has been proposed as a basic factor underlying the degree of vulnerability to LD. This paper investigates the correlation between several socioeconomic indicators and the level of vulnerability to LD in Italy, expressed as changes (1990–2000) in a composite index of land vulnerability (ΔLVI). The analysis was carried out over 784 local districts. The impact of per capita value added, agricultural intensity, industrial and tourism concentration, and urban growth was separately tested on ΔLVI. Results indicate that a lower district value added, crop intensification, irrigation, and the level of land vulnerability to degradation are strongly associated with the increasing level of land vulnerability over time, highlighting the role of the socioeconomic development as a main process underlying LD. In this framework, spatially equitable sustainable development may represent the effective strategy to mitigate the detrimental effects of economic growth and regional disparities on Mediterranean LD.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Effects of TiO2 based photocatalytic paint on concentrations and emissions of pollutants and on animal performance in a swine weaning unit

The beneficial effect of a TiO2-based photocatalytic treatment on the indoor air purification of a swine farm has been evaluated in a trial performed in two identical mechanically ventilated traditional weaning units, with 391 animals lodged in each of them. One unit was used as reference, whereas the walls of the second unit (260 m2) were coated with ca. 70 g m(-2) of TiO2 and irradiated with ten UV-A lamps. The environmental parameters (i.e. the ventilation rate, the internal and external temperature and relative humidity), together with NH3, CH4, CO2 and N2O concentrations in the exhaust ducts and PM10 emissions, were monitored in the two units throughout all of the production cycle (75 days). Significant decreases in CH4 concentration (ca. 27%, P < 0.05) and PM10 emission (ca. 17%, P < 0.01) were observed, together with an increase of the piglets' productive performance in the treated unit with respect to the reference one. Indeed, the ADG (Average Daily Gain of piglets) was 424 g vs. 414 g for the piglets lodged in the two units, respectively, with a significantly better feed conversion ratio (FCR, ratio between the food ingested by the animals and their weight gain) of 2.18 vs. 2.44 (P < 0.001). Therefore, the photocatalytic treatment with TiO2 coating had positive effects not only on methane concentration and particulate matter concentration and emission, but also significantly improved the feed conversion ratio of growing piglets, very likely due to the increased quality of indoor air, with positive economic repercussions for the farmer. Internal photocatalytic treatment in swine husbandry could thus be considered as a potential Best Available Technology (BAT).     

The adaptive response of lichens to mercury exposure involves changes in the photosynthetic machinery

Lichens are an excellent model to study the bioaccumulation of heavy metals but limited information is available on the molecular mechanisms occurring during bioaccumulation. We investigated the changes of the lichen proteome during exposure to constant concentrations of mercury. We found that most of changes involves proteins of the photosynthetic pathway, such as the chloroplastic photosystem I reaction center subunit II, the oxygen-evolving protein and the chloroplastic ATP synthase β-subunit. This suggests that photosynthesis is a target of the toxic effects of mercury. These findings are also supported by changes in the content of photosynthetic pigments (chlorophyll a and b, and β-carotene). Alterations to the photosynthetic machinery also reflect on the structure of thylakoid membranes of algal cells. Response of lichens to mercury also involves stress-related proteins (such as Hsp70) but not cytoskeletal proteins. Results suggest that lichens adapt to mercury exposure by changing the metabolic production of energy.     

Optimal deployment of emissions reduction technologies for construction equipment

The objective of this research was to develop a multiobjective optimization model to deploy emissions reduction technologies for nonroad construction equipment to reduce emissions in a cost-effective and optimal manner. Given a fleet of construction equipment emitting different pollutants in the nonattainment (NA) and near -nonattainment (NNA) counties of a state and a set of emissions reduction technologies available for installation on equipment to control pollution/emissions, the model assists in determining the mix of technologies to be deployed so that maximum emissions reduction and fuel savings are achieved within a given budget. Three technologies considered for emissions reduction were designated as X, Y, and Z to keep the model formulation general so that it can be applied for any other set of technologies. Two alternative methods of deploying these technologies on a fleet of equipment were investigated with the methods differing in the technology deployment preference in the NA and NNA counties. The model having a weighted objective function containing emissions reduction benefits and fuel-saving benefits was programmed with C++ and ILOG-CPLEX. For demonstration purposes, the model was applied for a selected construction equipment fleet owned by the Texas Department of Transportation, located in NA and NNA counties of Texas, assuming the three emissions reduction technologies X, Y, and Z to represent, respectively, hydrogen enrichment, selective catalytic reduction, and fuel additive technologies. Model solutions were obtained for varying budget amounts to test the sensitivity of emissions reductions and fuel-savings benefits with increasing the budget. Different mixes of technologies producing maximum oxides of nitrogen (NO(x)) reductions and total combined benefits (emissions reductions plus fuel savings) were indicated at different budget ranges. The initial steep portion of the plots for NO(x) reductions and total combined benefits against budgets for different combinations of emissions reduction technologies indicated a high benefit-cost ratio at lower budget amounts. The rate of NO(x) reductions and the increase of combined benefits decreased with increasing the budget, and with the budget exceeding certain limits neither further NO(x) reductions nor increased combined benefits were observed. Finally, the Pareto front obtained would enable the decision-maker to achieve a noninferior optimal combination of total NO(x) reductions and fuel-savings benefits for a given budget.     

The role of environmental and socio-demographic indicators in the analysis of land use changes in a protected area of the Natura 2000 Network: the case study of Lake Trasimeno,Umbria, Central Italy

This article sets out to analyse how and to what degree land use is linked to the physical characteristics of the territory itself, and the way in which changes in land use are determined by agricultural and socio-demographic dynamics. The study was conducted within the territorial boundaries of five municipalities surrounding Lake Trasimeno and refers to the periods 1977–2000 for land use and 1971–2001 for socio-demography data. The use of environmental, social, economic and agricultural indicators demonstrates how a mix of various indicators are useful for monitoring the changes which took place. It also shows the powerful influence that socio-demographic factors exert upon land use and landscape change.     

Comparison of environmental impacts related to municipal solid waste and construction and demolition waste management and recycling in a Latin American developing city

Environmental Science and Pollution Research - Construction and demolition waste (CDW) and municipal solid waste (MSW) are the waste flows mostly generated at a global level. In developing...