Statistical investigation of polychlorinated dibenzo-p-dioxins and dibenzofurans in the ambient air of Houston, Texas

Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (dioxins and furans) are persistent, bioaccumulative and highly toxic chemical constituents that appear in the environment at very low and difficult to measure levels. Although dioxins and furans are widely recognized as toxic contaminants needing regulation, their temporal and spatial concentration profiles and the factors impacting their partitioning and congener distribution are only moderately understood. This paper presents the results from one of the most extensive ambient air dioxin and furan sampling efforts conducted in a geographic area to date. The data consist of monthly ambient concentrations of 17 of the most toxic congeners of dioxins and furans collected at five locations in Houston, Texas over a calendar year. The results showed a total annual mean dioxin and furan congener concentration of 1047 fg/m3 and an annual mean summation operatorI-TEQ concentration of 15 fg I-TEQ/m3 (16 fg WHO-TEQ/m3). These results, when compared with proximate data from the USEPA National Dioxin Ambient Monitoring Network (NDAMN), revealed significant (at the P0.05 level) differences between Houston and the NDAMN sites, suggesting the existence of local dioxin sources. A temporal analysis of the data showed that the congener concentration distribution varies over time, depending on the level of chlorination, type of congener, and temperature. The results also suggested that the fluctuations of congener concentrations and I-TEQ concentrations are closely correlated with minimum relative humidity, mean temperature, and mean NOx concentration.     

PCB and PAH releases from power stations and waste incineration processes in the UK

This study focused on emissions of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) from incineration and power generation processes. Increased concern over human exposure to both classes of compounds has meant that environmental regulators need to assess the contribution made by emissions from regulated processes to human exposure. In the first part of an assessment in the UK we reviewed literature data on emissions of PCB, focusing on the dioxin-like PCB assigned toxic equivalency factors by the World Health Organization, and PAH. The literature study was supplemented by a series of plant tests to gather initial real plant data. Literature data were limited and the lack of standard protocols for measurement and reporting of both PCB and PAH meant that few data sets were comparable. Levels of dioxin-like PCB reported in the literature and measured in UK plant tests showed that well-controlled modem combustion plants with comprehensive pollution controls gave low emissions, typically about 5-10% of the toxic equivalent of the emissions of polychlorinated dibenzodioxins and dibenzofurans at the same plants and below the widely used standard of 0.1 ng TEQ/N m3.     

Peatlands: a major sink of naturally formed organic chlorine

It is a little known fact that many chlorinated organic compounds occur naturally and that some are also indispensable to life on earth. Here, we show that chlorination of organic compounds during humification processes in peat is widespread in nature. Globally this process has led to the accumulation of approximately 280-1000 million tons of organically bound chlorine in peatlands during the postglacial period.     

Adsorption and desorption characteristics of semiconductor volatile organic compounds on the thermal swing honeycomb zeolite concentrator

The use of a honeycomb zeolite concentrator and an oxidation process is one of the most popular methods demonstrated to control volatile organic compound (VOCs) emissions from waste gases in semiconductor manufacturing plants. This study attempts to characterize the performance of a concentrator in terms of the removal efficiencies of semiconductor VOCs (isopropyl alcohol [IPA], acetone, propylene glycol methyl ether [PGME], and propylene glycol monomethyl ether acetate [PGMEA]) under several parameters that govern the actual operations. Experimental results indicated that at inlet temperatures of under 40 degrees C and a relative humidity of under 80%, the removal efficiency of a zeolite concentrator can be maintained well over 90%. The optimal rotation speed of the concentrator is between 3 and 4.5 rph in this study. The optimal rotation speed increases with the VOCs inlet concentration. Furthermore, reducing the concentration ratio helps to increase the removal efficiency, but it also increases the incineration cost. With reference to competitive adsorption, PGMEA and PGME are more easily adsorbed on a zeolite concentrator than are IPA and acetone because of their high boiling points and molecular weights.     

Knowledge and utilization of edible mushrooms by local populations of the rain forest of south Cameroon

Indigenous knowledge of edible fungi and their utilization by local populations were investigated in southern Cameroon from 1996 to 1999. Some 100 participants from the major ethnic groups, comprising Bantu farmers and Bagyeli (Pygmy) hunter-gatherers, were interviewed. Mushroom usage by 30 families, (319 persons), was monitored daily for over a year. Mushroom knowledge among both groups was extensive. Over 50 vernacular names were provided by respondents. In Bantu households, women and children, and to some extent hunters, harvest mushrooms. In contrast, the whole Bagyeli household participates. Bantu harvest mushrooms preferentially in secondary forests while Bagyeli collect them predominantly in primary forests. Mushroom consumption is low for both groups, 1.1 and 1.4 kg of fresh mushrooms per person per year, respectively, a rate that is much lower than in central and eastern Africa. The apparent discrepancy between extensive mushroom knowledge and rather infrequent mushroom consumption probably relates to the social valuation of mushrooms.     

Analysis of the long-term behavior of solute transport with nonlinear equilibrium sorption using breakthrough curves and temporal moments

We analyzed the long-term behavior of breakthrough curves (BTCs) and temporal moments of a solute subjected to Freundlich equilibrium sorption (s = kc(n)). For one-dimensional transport in a homogeneous porous medium, we derived a power-law relation between travel time, tau, and solute displacement, chi, with the exponent being equal to the Freundlich n exponent. The mean solute velocity, derived from the first time moment, was found to change as tau(n-1). For n values larger than 0.66, the second time moment could be related to c chi(2/n), where c is a constant. An approach based on the use of a critical concentration was developed to estimate the presence of the asymptotic regime in the tail of the BTC. This approach was tested successfully using numerical case studies. One-dimensional numerical simulations with varying values of k, n and initial mass were run to verify the closed form analytical expressions for the large time behavior of temporal moments and the tailing part of breakthrough curves. Good agreement between the slope of the tailing part of log-log transformed BTCs and the predicted slope using asymptotic theory was found. Asymptotic theory in general underestimated the magnitude of the concentration in the tail. The quality of the estimated concentrations in the tail improved for small values of the dispersivity. Experimental BTCs of uranin and benazolin were analyzed in combination with sorption/desorption batch experiments using asymptotic theory. A good agreement between the value of n parameter derived from desorption experiment with benazolin and the value of the n parameter derived from the tail of the BTC was found.     

A mechanism for mercury oxidation in coat-derived exhausts

This paper evaluates an elementary reaction mechanism for Hg0 oxidation in coal-derived exhausts consisting of a previously formulated homogeneous mechanism with 102 steps and a new three-step heterogeneous mechanism for unburned carbon (UBC) particles. Model predictions were evaluated with the extents of Hg oxidation monitored in the exhausts from a pilot-scale coal flame fired with five different coals. Exhaust conditions in the tests were very similar to those in full-scale systems. The predictions were quantitatively consistent with the reported coal-quality impacts over the full range of residence times. The role of Cl atoms in the homogeneous mechanism is hereby supplanted with carbon sites that have been chlorinated by HCl. The large storage capacity of carbon for Cl provided a source of Cl for Hg oxidation over a broad temperature range, so initiation was not problematic. Super-equilibrium levels of Cl atoms were not required, so Hg was predicted to oxidize in systems with realistic quench rates. Whereas many fundamental aspects of the heterogeneous chemistry remain uncertain, the information needed to characterize Hg oxidation in coal-derived exhausts is now evident: complete gas compositions (CO, hydrocarbons, H2O, O2 NOx, SOx), UBC properties (size, total surface area), and the ash partitioning throughout the exhaust system are required.     

Assessment of the sustainability of technology by means of a thermodynamically based life cycle analysis

Life cycle analysis is one of the tools in the assessment of the sustainability of technological options. It takes into account all effects on the ecosystem and the population which may endanger the possibilities of current and future generations. However, the main bottleneck in current LCA methodologies is the balancing of different effects, being all quantified on different scales. In this work, a methodology is proposed, which allows one to quantify different effects of the production, consumption and disposal of goods, and services on a single scale. The basis of the methodology is the second law of thermodynamics. All production, consumption and disposal processes affecting the ecosystem and the population, are quantified in terms of loss of exergy. The exergy content of a material is the maximum amount of energy which can be transformed into work at given environmental conditions. Next to the elaboration of the methodology, the new approach is illustrated by examples of the production of synthetic organic polymers, inorganic building insulation materials and different waste gas treatment options.     

Soot-water distribution coefficients for polychlorinated dibenzo-p-dioxins,polychlorinated dibenzofurans and polybrominated diphenylethers determined with the soot cosolvency-column method

For many types of hydrophobic compounds, sorption non-linearity and solid-water distributions in the field well above expectations from organic matter partitioning models have lead to the proposition that strong adsorption to soot surfaces may not be limited to polycyclic aromatic hydrocarbons but may extend as a significant process for many aromatic compound classes. Here, the soot-water distribution coefficients (Ksc) were determined with the soot cosolvency-column method for homolog series of five polychlorinated dibenzo-p-dioxins (PCDDs), five polychlorinated dibenzofurans (PCDFs) and for two polybrominated diphenylethers (PBDEs). All compounds exhibited significantly stronger association with soot carbon than expected from estimates of their bulk organic-carbon normalized partition coefficients (Koc). The Ksc/Koc ratios (at aqueous concentrations of around 0.1-1 microg/l) were for PCDDs (up to tetrachlorination) 19-130 (median 25), for PCDFs (also up to tetrachlorination) 150-490 (median 300), and for both the tetra- and pentabrominated PBDEs a factor of 60. The particularly strong soot sorption for the PCDFs is of similar enhancement factors as previously elucidated for polycyclic aromatic hydrocarbons. Compound-class specific correlations between log Ksc and octanol-water partition coefficients (log Kow) were significant for both PCDDs and PCDFs (and with R2 > 98%). These may prove useful for anticipating variable fractions of dissolved exposures between different environmental regimes and putative remediation objects.     

Holocene biomass burning and global dynamics of the carbon cycle

Fire regimes have changed during the Holocene due to changes in climate, vegetation, and in human practices. Here, we hypothesise that changes in fire regime may have affected the global CO2 concentration in the atmosphere through the Holocene. Our data are based on quantitative reconstructions of biomass burning deduced from stratified charcoal records from Europe, and South-, Central- and North America, and Oceania to test the fire-carbon release hypothesis. In Europe the significant increase of fire activity is dated approximately 6000 cal. yr ago. In north-eastern North America burning activity was greatest before 7500 years ago, very low between 7500-3000 years, and has been increasing since 3000 years ago. In tropical America, the pattern is more complex and apparently latitudinally zonal. Maximum burning occurred in the southern Amazon basin and in Central America during the middle Holocene, and during the last 2000 years in the northern Amazon basin. In Oceania, biomass burning has decreased since a maximum 5000 years ago. Biomass burning has broadly increased in the Northern and Southern hemispheres throughout the second half of the Holocene associated with changes in climate and human practices. Global fire indices parallel the increase of atmospheric CO2 concentration recorded in Antarctic ice cores. Future issues on carbon dynamics relatively to biomass burning are discussed to improve the quantitative reconstructions.