Hazard property classification of waste according to the recent propositions of the EC using different methods

Hazard classification of waste is a necessity, but the hazard properties (named “H” and soon “HP”) are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors.In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>1 0 0).Data for 45 wastes – documented with extensive chemical analysis and flammability test – were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values.This data set showed HP 14 ‘Ecotoxic chronic’ is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 ‘Carcinogenic’. The third most frequent hazard is HP 10 ‘Toxic for reproduction’ and the fourth most frequent hazard is HP 4 “Irritant – skin irritation and eye damage”. In a stepwise approach, it seems relevant to assess HP 14 first, then, if the waste is not classified as hazardous, to assess subsequently HP 7, HP 10 and HP 4, and then if still not classified as hazardous, to assess the remaining properties.The elements triggering the HP 14 classification in order of importance are Zn, Cu, Pb, Cr, Cd and Hg. Progress in the speciation of Zn and Cu is essential for HP 14. Organics were quantified by the proposed method (AFNOR XP X30-489) and need no speciation. Organics can contribute significantly to intrinsic toxicity in many waste materials, but they are only of minor importance for the assessment of HP 14 as the metal concentrations are the main HP 14 classifiers. Organic compounds are however responsible for other toxicological characteristics (hormone disturbance, genotoxicity, reprotoxicity…) and shall be taken into account when the waste is not HP 14 classified.     

Nutritionally relevant elements in staple foods: influence of arable site versus choice of variety

Eighteen representative sites for the Austrian grain-growing and eight for the potato-growing zones (soils and crops) were investigated. On each site, total element contents (B, Ba, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Sr and Zn) were determined in 4–12 varieties of winter wheat (n = 136), 6 varieties of spring durum wheat (n = 30), 5 varieties of winter durum wheat (n = 15), 7 varieties of rye (n = 49), 5 varieties of spring barley (n = 30) and 5 varieties of potatoes (n = 40). Element accumulations in grain species and potato tubers varied significantly with site conditions, with the main exceptions for B in potatoes and wheat as well as for Zn, Cu and Co in durum wheat. On average, across all investigated sites, differences in varieties occurred concerning the elements Ca, Cd, Ba, Sr and Zn (except Zn in potatoes and winter durum). A rough estimation revealed that an average Austrian consumer of wheat, rye and potatoes meets more than 50% of the needs of daily element intake for K, P and Mg, between 36 and 72% for Fe, Zn and Cu, and more than 100% for Co, Mo and Mn. In particular, the elements Ca and Na have to be added from other sources.     

A new neosuchian with Asian affinities from the Jurassic of northeastern Brazil

Phylogenetic relationships near the origin of extant crocodylians are weakly supported, and this lack of resolution makes for poor estimates of taxonomic and morphological diversity. Previously known taxa are found throughout the Cretaceous in Laurasia and at a few sites from Brazil, Australia, and northern Africa. Here, we report Batrachomimus pastosbonensis gen. et sp. nov. from the Late Jurassic of northeastern Brazil, which is deeply nested within Neosuchia and associated to the Cretaceous Asian paralligatorids. The new taxon predates all other members of Paralligatoridae and its immediate sister group (including Eusuchia) by 30 million years. A nearly complete skull, osteoderms, and limb bones were recovered, and autapomorphies of B. pastosbonensis include a scalloped lateral margin of the rostrum in dorsal view, unsculpted alveolar margin at the caudalmost portion of the maxilla, blunt lateral prongs on the jugal at the base of the postorbital bar, hourglass shaped choanae, and pterygoid choanal septum extended between the palatal shelves of the palatines. The crocodyloid-like skull proportions and the slender, conical teeth suggest an amphibious and piscivorous life history to this 1 m long animal.

     

Book reviews

Environment Systems and Decisions -     

Formation of polyester blends by a recombinant strain ofPseudomonas oleovorans: Different poly(3-hydroxyalkanoates) are stored in separate granules

WhenPseudomonas oleovorans (GPo1) is grown on sodium octanoate under ammonium limiting conditions, it is able to accumulate a copolyester consisting of medium chain length 3-hydroxyalkanoic acids (PHA_m). 3-Hydroxybutyrate is only incorporated in trace amounts. WhenP. oleovorans is equipped with the PHB biosynthetic genes ofAlcaligenes eutrophus (GPo1[pVK101::PP1]), it forms a polyester containing major amounts of 3-hydroxybutyrate. The resulting polymer however is a blend of PHA_m and PHB, rather than a copolymer of 3-hydroxybutyrate and medium chain length 3-hydroxyalkanoic acids [11]. To establish whether PHA_m and PHB molecules are stored in the same or separate granules by this recombinantP. oleovorans strain, we studied polymer forming cells by freeze-fracture electron microscopy. This approach is possible because previous freeze-fracture electron microscopy studies on PHA_m and PHB accumulating strains have shown that PHA_m and PHB granules can be distinguished from each other: PHA_m granules from mushroom-like structures, whereas PHB granules from needle structures during freeze-fracturing. In this paper we show that stationary phase cells of GPo1[pVK101::PP1] contained both mushroom and needle-like structures, indicating that PHA_m and PHB chains were stored in separate granules. To be able to determine whether the separation of PHA_m and PHB is complete, the respective granules were separated on sucrose gradients. A total cell extract of GPo1[pVK101::PP1] which was subjected to sucrose gradient centrifugation revealed two white bands of different densities: the upper band with a density of 1.05 g/mL consisted exclusively of PHA_m granules, while the lower band with a density of 1.19 g/mL consisted of PHB granules only. Thus, when bacteria synthesize both PHA_m and PHB, the resulting polymer chains are segregated completely and stored in separate granules.     

Evaluation of synthetic adsorbents for cleanup of herbicide-laden wastewater

Small-and large-scale farm operators and applicators urgently need user-friendly and cost-effective on-site methods to treat dilute-formulated herbicide-laden wastewater (i.e., rinsate). In this study, we investigated solvent-regenerable synthetic adsorbents, Ambersorb® 563 adsorbent, Ambersorb 572 adsorbent, and Ambersorb 575 adsorbent, as alternatives to activated carbon (Filtrasorb ® 400) for cleanup of water containing Dual 8E (a.i., metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)acetamide]) or Banvel 4L (a.i., dicamba [3,6-dichloro-2-methoxybenzoic acid]). Batch-type adsorption experiments were conducted to compare adsorptive capacities of the various adsorbents. Adsorption maxima, obtained from adsorption isotherms, indicated that of the Ambersorb adsorbents tested, Ambersorb 572 adsorbent generally exhibited the highest adsorptive capacities for the herbicides tested and was comparable to Filtrasorb 400. Solvent (methanol) regenerability studies demonstrated that herbicide was readily recovered from Ambersorb 572 adsorbent and Filtrasorb 400. In general, metolachlor was more readily recoverable than dicamba. In fixed-bed column studies, Ambersorb 572 adsorbent exhibited twice the adsorptive capacity of Filtrasorb 400. Fixed-bed columns were more effective in removing metolachlor from herbicide containing water regardless of the adsorbent used. Multicycling of Ambersorb 572 adsorbent resulted in 30% loss of adsorptive capacity for dicamba as Banvel 4L and no loss of adsorptive capacity for metolachlor as Dual 8E. Working capacity was reached after three adsorption-regeneration cycles. Fixed-bed columns packed with solvent-regenerable adsorbents may prove useful as part of an on-site wastewater disposal system.     

Pollution,place, and premature death: evidence from a mid-sized city

ABSTRACT

Neighborhood life expectancy varies by as much as 10 years across the City of Louisville. In 2013, the Greater Louisville Project funded by local government, businesses, and foundations, argued these differences had little to do with environmental factors. The Greater Louisville Project (2013) study argued that these neighborhood differences could be attributed 40% to socio-economic factors (with a major emphasis on education), 10% to physical environment, 30% to health behaviors, and 20% to access to medical care. To test these claims, we construct our own model of neighborhood variation in years of potential life lost (YPLL) by adding two variables testing environmental degradation. We operationalise two separate measures of environmental contamination: proximity to EPA designated brownfield sites and proximity to chemical factories in an industrial park in the neighborhood known as “Rubbertown”. We conduct several regression analyses, which show a relationship between proximity to environmental contaminants and an increase in neighborhood YPLL. Our beta weights challenge the claims made by the Greater Louisville Project, which minimize the impact nearness to environmental contaminants has on reductions in life expectancy in Louisville neighborhoods.     

Scope insensitivity in contingent valuation of complex environmental amenities

It has been argued that respondents in contingent valuation (CV) surveys, asked to value complex environmental amenities, will state willingness to pay (WTP) independently of the scope of the project. Such insensitivity to scope would be at odds with rational choice, and could therefore imply that CV is not a theoretically valid method for biodiversity valuation. The scope test in the present CV study was applied to endangered species preservation. Respondents were split in four sub-samples facing different scopes of endangered species preservation. The design allowed for both external and internal scope tests. Furthermore, the tests were split according to elicitation format. Of four external tests of insensitivity to scope, one was rejected, two gave mixed results, depending on either the type of test or elicitation format, and for the last one the null hypothesis could not be rejected. Of five internal tests, insensitivity to scope was rejected in three cases, one test gave mixed results, and one could not be rejected. Survey design features of the CV study, especially an unfamiliar sub-group of endangered species, could explain the apparent insensitivity to scope observed.     

Reproductive health in Afghanistan: results of a knowledge, attitudes and practices survey among Afghan women in Kabul

A reproductive-health knowledge, attitudes and practices (KAP) survey was carried out among 468 Afghan women of reproductive age. A convenience sample of women was selected from attendees in the outpatient departments of four health facilities in Kabul. Seventy-nine per cent of respondents had attended at least one antenatal consultation during their last pregnancy. Two-thirds (67 per cent) delivered their first child between 13 and 19 years. The Caesarean-section rate was low (1.6 per cent). Two-thirds (67 per cent) of deliveries occurred in the home. The contraceptive prevalence rate was 23 per cent (16 per cent modern and 7 per cent natural methods). Twenty-four per cent had knowledge of any STIs, although most of these women did not know correctly how to prevent them. Most of the women (93 per cent) needed authorization from their husband or a male relative before seeking professional health-care. In multivariate analysis, women's schooling was significantly associated with antenatal-care attendance (AOR 4.78), institutional delivery (AOR 2.29), skilled attendance at birth (AOR 2.07) and use of family planning (AOR 4.59). Reproductive-health indicators were noted to be poor even among these women living in Kabul, a group often considered to be the most privileged. To meet the reproductive-health needs of Afghan women, the socio-cultural aspects of their situation--especially their decision-making abilities -- will need to be addressed. A long-standing commitment from agencies and donors is required, in which the education of women should be placed as a cornerstone of the reconstruction process of Afghanistan.     

Whiplash-associated disorders in frontal impacts: influencing factors and consequences

This multidisciplinary in-depth investigation of accidents using 24 occupants with neck symptoms shows the complexity of whiplash-associated disorders (WAD) in frontal impacts with respect to factors that influence occurrence as well as duration of symptoms. Several different occupant kinematics have been identified, all resulting in symptoms classified as WAD. Compared to occupants restrained only by a seat belt, occupants with arm resistance influence showed a greater representation of symmetrical neck symptoms. Two cases of unbelted occupants with a neck compression mechanism far from conventional "whiplash" motion were found. Posture as well as physical and psychosocial factors such as strong negative reactions, bad prognosis expectation, and stressed daily activities influenced the duration of symptoms. Occupant characteristics and sitting posture and behavior at the time of impact are important factors when analyzing and understanding WAD.