中原油田石油污染土壤原位生物修复技术实验研究

通过实验室选择性富集培养,从中原油田石油污染土壤中获得了能以中原原油为碳源快速生长的石油降解菌群。结合黑麦草（Ryegrass）和苜蓿（Alfalfa）,采用该降解菌群对原油污染土壤进行了原位生物联合修复实验。接入降解菌的实验区分种植黑麦草、种植苜蓿、未种植区,另设黑麦草区和空白区。经过99 d的生物修复,石油烃累计降...     

气氛对垃圾焚烧中重金属迁移特性的影响

对城市生活垃圾焚烧过程中Ni、Cd、Cu、Pb、Cr和Zn 6种重金属在不同气氛中的挥发率进行了研究，同时比较了氧化性气氛和还原性气氛、中性气氛和酸性气氛以及在混合气氛中各重金属的挥发率。结果表明，氧化性和还原性气氛对Ni、Cu和Cr挥发影响较大，Cr、Cd、Pb和Zn在还原气氛下挥发率比在氧化气氛下高，而Ni和Cu则...     

常温低基质厌氧氨氧化反应器启动及其稳定性

以上向流生物滤池为反应器,以实验室内氧化沟回流污泥为接种污泥,采用先培育好氧生物膜,后转为厌氧环境培育厌氧氨氧化生物膜的方式,成功实现了常温低基质浓度下厌氧氨氧化反应器的启动。控制反应器进水pH为7.50～7.80,NH4+-N为30～40 mg/L,NO2--N为35～50 mg/L,温度为20～25℃。224 d以后,反应器启动成功。在稳定运行阶段,出水亚硝氮和氨氮的平均浓度分别为1.4 mg/L和4.6 mg/L,平均去除率分别为95.3%和90.1%,去除比例为1～1.8∶1,主要集中在1.4～1.5∶1,亚硝氮和氨氮去除的容积负荷分别为104.2 mg/(L.d)和146.0 mg/(L.d)。     

污泥好氧颗粒化过程中氨氧化菌群结构的演替与分析

为了揭示颗粒污泥形成过程中氨氧化菌(AOB)群落结构的演替规律,利用变性梯度凝胶电泳(DGGE)、克隆测序和实时定量聚合酶链式反应(real-time PCR)等分子生物学技术对AOB群落的演替进行了研究。DGGE结果表明,污泥接种驯化期,AOB群结构的变化较为剧烈,在外加选择压的作用下,种群多样性迅速下降;但随着污泥颗粒化的完成而趋于稳定。测序结果表明,接种污泥中的大多数亚硝化单胞菌属因可快速适应工艺的淘洗过程而被保留在系统内,而亚硝化螺菌属逐渐被淘汰。real-time PCR结果表明,在经历了运行初期的淘洗后,AOB含量随着污泥浓度的提高而逐渐增长;但污泥的氨氧化活性随着污泥浓度的增长而降低。     

厌氧-局部循环供氧生物膜技术处理农村污水

通过模拟农村生活污水水质和间歇进水特点,利用“厌氧-局部循环供氧生物膜”技术,研究该工艺对有机物、氮、磷的去除效果.厌氧池和局部循环供氧池有效容积比为1∶1.6,曝气装置位于局部循环供氧池中间底部,环形导流板将局部循环供氧池分隔成中间好氧区和四周缺氧区,斜管沉淀池前置到厌氧池与局部循环供氧池之间,出水端设置循环水池.装置连续稳定运行12个月,平均进水量为140 L/d,生物反应区HRT为1.3d.监测结果表明,出水COD、BOD、NH3-N、TN和TP平均浓度分别在40.31、3.38、2.69、11.98和0.75 mg/L,达到了国家城镇污水处理厂污染物排放指标(GB-18918-2002)中的一级排放标准.研究表明,厌氧-局部循环供氧技术是一种适合农村分散污水处理的新工艺,可有效减轻农业面源污染.     

高效阿特拉津降解菌株DNS10降解条件优化

从长期施用阿特拉津的寒地黑土耕层(0～10 cm)土壤中筛选到一株能以除草剂阿特拉津为氮源生长的降解菌株,结合16S rRNA序列分析结果,将该菌株命名为Arthrobacter sp.DNS10。在接种量为108CFU/mL的条件下,菌株DNS10在24 h内对100 mg/L阿特拉津的降解率为99.41%。单因子实验结果表明,菌株DNS10适宜生长和降解的条件范围是:温度25～35℃,pH值5.0～8.0,培养液盐度0.1%～2%,对阿特拉津最大耐受浓度可达1 200 mg/L。正交实验法进一步表明,该菌株保持较好生长及降解能力的最优方案是温度30℃,pH值7.5,培养液盐度0.5%。影响其降解能力的环境因素的主次顺序依次是:温度>盐度>pH值。     

A2O工艺中雌激素的行为变化和去除机理

研究了厌氧-缺氧-好氧(A2O)活性污泥工艺对生活污水中天然雌激素雌酮(Estrone,E1)、17β-雌二醇(17β-Estradiol,E2)以及17α-乙炔基雌二醇(17α-Ethynylestradiol,EE2)的去除性能。在对COD、N和P具有良好去除效果的前提下,对E1、E2和EE2的去除率可分别达到92.7%、100%和62.7%。通过对各反应单元内3种雌激素的物料平衡分析,表明A2O工艺对雌激素的去除主要发生在厌氧段和好氧段。以失活污泥作为对照组,好氧硝化过程中雌激素去除的小试实验发现,好氧过程中E1、E2的去除主要依靠生物降解作用,而EE2的去除则主要依赖于活性污泥对其的吸附作用。     

Evaluation of efficiency of aircraft liquid waste treatment and identification of daily inspection indices: a case study in Changchun, China

Evaluation of the efficiency of aircraft liquid waste treatment has previously been conducted to prevent pollution of the environment. The current study aimed to provide a set of practical methods for efficient airport sanitary supervision. Aircraft liquid waste was collected at Longjia International Airport, Changchun from multiple flights. The efficiency of liquid waste treatment as well as the water quality of the wastewater processed via a second-stage wastewater facility were examined by measuring a number of physical, chemical, and biological indices. Our results indicated that treatment solely via resolvable sanitizing liquid was not sufficient. Although the contents of first-class pollutants all met the requirements of the standard criteria, the contents of a number of second-class pollutants did not satisfy these criteria. However, after further treatment via a second-stage wastewater facility installed at the airport, all indices reached second-grade requirements of the discharge standard. We suggest that daily inspection and quarantine indices at airports should include the suspension content, biological oxygen demands after 5 days, chemical oxygen demand total organic carbon content, amino nitrogen content, total phosphorous content, and the level of fecal coliforms.     

利用高炉水淬渣制作多孔吸声材料的研究

为了促进高炉炼铁水淬渣的二次利用,研究了以高炉炼铁水淬渣为原料,以硅微粉或水泥为粘结剂,采用压制成型方法制作的多孔吸声材料的吸声性能及力学性能。结果表明:用颗粒状的高炉炼铁水淬渣制作的多孔吸声材料具有良好的吸声性能,其平均吸声系数可以达到0.70以上;材料的抗压强度可以达到3.0 MPa以上。     

Precipitation of Charged Dust Particles on Electrostatic Screen

The purpose of this paper is to present collection performance dependence upon the parameters of channeled electrodes in a twostage precipitator. The practical channeled electrostatic screens are classified into two types and the respective theoretical collection efficiency equations are obtained by employing idealized models. It is shown that In normal operating conditions the most effective particle collection mechanism in the device is electrostatic precipitation rather than the Inertlal separation. It is also pointed out that the channeled electrode, in comparison with the plate-type, should be a narrow width. An empirical efficiency equation is recommended and the agreement between experimental data and empirical equation is within 6%.