Advances In Out Door Lysimeter Techniques

Different methods exist for measuring soil water and solute fluxes in and below the root zone and have been critically reviewed. Besides indirect methods (e.g. water balance, tensiometer, time domain reflectometry – TDR, frequency domain reflectometry – FDR, environmental tracer) direct methods (e.g. drainage-type lysimeter, water fluxmeter) have a long tradition and have been successfully used in seepage research. A large weighable out door lysimeter is the best method for obtaining reliable data about seepage water quantity and quality, but it involves significant investment and additional expenses for maintenance. To tackle this problem new methods for the vertical collection of large volume soil monoliths (up to 6 m³) as well as for the horizontal collection (up to 6 m³) have been developed. For the placement of the lysimeter a container lysimeter unit was constructed, which is cheaper than a conventional steel or concrete cellar. Furthermore, the technical design of the newly developed lysimeter types as a weighable gravitation lysimeter, a weighable groundwater lysimeter and a lateral flow lysimeter are presented.     

Deposition Loads of Sulphur and Nitrogen in Germany

High spatial resolution maps of deposition loads in Germanyare produced as an input for abatement strategy research andfor critical loads exceedance calculations on a nationalscale. In this paper methods ofmapping total deposition loads in Germany and preliminarymaps of nitrogen and sulphur deposition loads for the year1993 are presented. A comparison of these mapping resultswith EMEP deposition mapping results has been carried out.The differences in the results of the German national and theEuropean EMEP mapping, due to different databases anddifferent methods, are quantified and discussed. Highresolution maps of deposition loads are compared to Europeanlow resolution maps on the same temporal and spatial scale,assuming that on average both should lead to similar results.However, the average differencescalculated for 23 EMEP 150 × 150 km² grid cells over Germanywere found to be 33% higher for sulphur (S) total depositionby the German method 65% higher for S dry deposition and1% lower for S wet deposition. The German results fornitrogen (N) total deposition are 2% higher than the EMEPresult 22% higher for N dry deposition and 10% lower for Nwet deposition.     

Critical Loads Exceedances in Germany and their Dependence on the Scale of Input Data

Critical load exceedances have been used as an effects-related parameter for guiding international air emission control negotiations. High-resolution critical load data are combined with low-resolution deposition data.This article shows that doing so systematicallyunderestimates `true' critical load exceedances as obtainedfrom combining critical load and deposition data of identicalhigh spatial resolution. 95th percentile critical loadexceedances in EMEP grids based on high resolution depositiondata are 60 and 150% higher (mean values for nutrientnitrogen and acidity, respectively) than critical loadexceedances based on the low resolution EMEP depositionmodel. The latter are used in international negotiations. Differences in individual EMEP grid squares vary betweeninsignificantly different from zero and 340%, depending onregional deposition and critical load characteristics andcritical load types (nutrient nitrogen versus acidity).Exceedances based on high-resolution deposition values arealso compared to EMEP grid averages of these values forforests only. This comparison excludes the effect ofsystematically higher depositions to forests. Still, thescale difference of (averaged, low-resolution) deposition and(high-resolution) critical loads data yields underestimatesof the 95th percentiles by on average ca. 20%.These systematic errors due to the scale dependence should beborne in mind when interpreting effects of internationalemission control measures.     

Trace element concentration in wheat grain: results from the Swedish long-term soil fertility experiments and national monitoring program

Concentrations of trace elements in wheat grain sampled between 1967 and 2003 from the Swedish long-term soil fertility experiments were analyzed using ICP-MS. The long-term effect of inorganic and organic fertilization on trace metal concentrations was investigated including the impact of atmospheric deposition and myccorhiza, whereas other factors such as soil conditions, crop cultivar, etc. are not discussed in this paper. Mean values derived from 10 experimental sites were reported. Significantly declining Pb and Cd concentrations in wheat grain could be explained by lower atmospheric deposition. Mean Se contents in all samples were 0.031 mg kg⁻¹ grain dry weight. No samples had sufficiently high Se concentrations for human (0.05 mg Se kg⁻¹) or animal demand (0.1 mg Se kg⁻¹). Concentrations of Co in wheat grain were extremely low, 0.002–0.005 mg Co kg⁻¹ grain dry weight, and far below the minimum levels required by animals, which applied to all fertilizer treatments. A doubling of Mo concentrations in grain since 1975 resulted in Cu/Mo ratios often below one, which may cause molybdenosis in ruminants. The increase in Mo concentrations in crops correlated with the decline in sulfur deposition. Concentrations of Cu and Fe declined in NPK-fertilized wheat as compared to unfertilized or manure-treated wheat. Very low concentrations of Se and Co and low concentrations of Fe and Cu require attention to counteract risks for deficiencies. The main characteristic of the study is that there are few significant changes over time between different fertilizer treatments, but throughout there are low concentrations of most trace elements in all treatments. In general, good agreement between concentrations in wheat from the long-term fertility experiments and the national monitoring program indicate that values are representative.     

Longitudinal and vertical trends in stable isotope signatures (δ13C and δ15N) of omnivorous and carnivorous copepods across the South Atlantic Ocean

Stable isotope (SI) ratios of carbon (δ¹³C) and nitrogen (δ¹⁵N) were measured in omnivorous and carnivorous deep-sea copepods of the families Euchaetidae and Aetideidae across the Atlantic sector of the Southern Ocean to establish their trophic positions. Due to high and variable C/N ratios related to differences in lipid content, δ¹³C was corrected using a lipid-normalisation model. δ¹⁵N signals ranged from 3.0–6.9‰ in mesopelagic species to 7.0–9.5‰ in bathypelagic congeners. Among the carnivorous Paraeuchaeta species, the epi- to mesopelagic species Paraeuchaeta antarctica had lower δ¹⁵N values than the mesopelagic P. rasa and bathypelagic P. barbata. The same trend was observed among omnivorous Aetideidae, but was not significant. In the most abundant species P. antarctica, individuals from the western Atlantic had higher δ¹³C and δ¹⁵N values than specimens at the eastern stations. These longitudinal changes in δ¹³C and δ¹⁵N values were attributed to regional differences in hydrography and sea surface temperature (SST), in particular related to a northward extension of the Antarctic Polar Front (APF) at the easternmost stations. The results indicate that even in a mesopelagic carnivorous species, the changes in surface stable isotope signatures are pronounced.     

A comparison of predicted and measured levels of runoff-related pesticide concentrations in small lowland streams on a landscape level

Short-term pollution events via runoff are typical of streams in agricultural areas. Existing runoff models that simulate pesticide loss from agricultural fields require extensive input of information. There is thus a need for a simple model that can predict runoff-related pesticide concentrations in many streams on a landscape level when only limited data are available. To validate such a model, the runoff-related pesticide load of 18 small lowland streams was predicted with an extended version of the model "simplified formula for indirect loadings caused by runoff" (available from the Organisation for Economic Cooperation and Development, OECD). The authors suggest that the model presented here is suitable for use in routine exposure assessment of pesticides on a landscape level, as all input data (soil, slope, precipitation, pesticide application) are readily available from public authorities or could be generated by simple regional flood hydrograph curves. The predicted concentrations were compared with measured concentrations obtained by runoff-triggered sampling. Fungicides, insecticides and herbicides were detected in 17 streams, with max. concentrations measuring up to 29.7 microg/l for the fungicide azoxystrobin and 0.3 microg/l for the insecticide parathion-ethyl. Herbicides were detected in 16 streams, with max. concentrations between 13.7 and 1.2 microg/l. The linear regression between the predicted and measured concentrations (log-values) shows significant correlations for the following pesticides: azoxystrobin: r2=0.43; p=0.03; epoxiconazole: r2=0.71; por=0.5 microg/l).     

Fluvial levees in compound channels: a review on formation processes and the impact of bedforms and vegetation

Environmental Fluid Mechanics - Natural levees are wedge-shaped morphological features developing along the boundaries of mass flows. When they form in fluvial landscapes, they can have multiple...     

Circular economy for durable products and materials: the recycling of plastic building products in Germany—status quo,potentials and recommendations

Journal of Material Cycles and Waste Management - The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the...