Monitoring of environmental contaminants in raw bovine milk and estimates of dietary intakes of children in South Korea

Persistent organic pollutants (POPs) are ubiquitous residual contaminants in the environment and in the food chain. Milk is an important matrix for monitoring POP contamination. This study determined the concentrations of POPs including polybrominated diphenyl ethers (PBDEs), hexachlorobenzene (HCB), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (DL-PCBs) in raw bovine milk, and the data was used to estimate dietary intakes in South Korea. The average concentrations of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw milk were 0.29 ng g⁻¹ fat, 0.50 ng g⁻¹ fat, 0.27 pg TEQ g⁻¹ fat, and 0.33 pg TEQ g⁻¹ fat, respectively. No significant relationship was found between the concentrations of analytes and the regions sampled. The dietary intakes of PBDEs from the consumption of milk was calculated to be 0.26, 0.10, and 0.05 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of HCB was calculated to be 0.44, 0.16, and 0.09 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of PCDD/Fs and DL-PCBs was calculated to be 0.78, 0.29, and 0.16 pg TEQ kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. These results indicated that the residual levels of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw bovine milk were within safe levels.     

Assessment of plant-driven uptake and translocation of clofibric acid by Scirpus validus

Pharmaceutical compounds are now considered as emerging contaminants of environmental concern. The overall objective of this study was to evaluate the uptake and translocation of clofibric acid (CA) by the macrophyte Scirpus validus growing hydroponically. A set of the three replicates was established for each exposure time and for each CA concentration. Plants were grown in 4 L vessels (four plants per vessel corresponding to the three exposure period studies, i.e., 7, 14, 18, and 21 days) which contained an aerated modified Hoagland nutrient solution that was spiked with CA at concentrations of 0.5, 1.0, and 2.0 mg?L^?1. At each exposure period, CA concentration was measured in the nutrient solutions. A sea sand disruption method was employed for the extraction of CA from plant tissues. The determination of the pharmaceutical concentration was carried out using solid phase extraction (SPE) followed by chromatographic analysis. The quantification of CA concentrations in both nutrient solutions (after SPE) and plant tissues (after extraction) was conducted by chromatographic analysis. CA concentrations of 5.4–26.8 μg?g^?1 (fresh weight) were detected in the roots and 7.2–34.6 μg?g^?1 (fresh weight) in the shoots after 21 days. Mass balance calculations showed that S. validus uptake alone accounted for a significant contribution (6–13 % for the roots and 22–49 % for the shoots) of the total loss of CA. The bioaccumulation factors (BAFs) based on fresh weight for the roots ranged from 6.6 to 23.2, while values for the shoots ranged from 9.5 to 32.1. All the BAFs for the shoots were greater than those in the roots, implying that CA has greater tendency to be translocated to the shoots, rather than the roots of S. validus. All the shoot-to-root concentration ratios were more than 1, denoting that the shoots of S. validus do preferentially accumulate CA. We demonstrated that CA can be actively taken up, subsequently translocated and accumulated by aboveground tissues of S. validus. Since S. validus could account for the removal of 28–62 % of the total mass loss of CA from the system, such phytoremediation technology has great potential for the removal of pharmaceuticals such as CA from inflowing waters.     

Source Apportionment of Particulate Matter (PM10) and Indoor Dust in a University Building

A study on source apportionment of indoor dust and particulate matter (PM₁₀) composition was conducted in a university building by using chemometrics. The objective of this study was to investigate the potential sources of selected heavy metals and ionic species in PM₁₀ and indoor dust. PM₁₀ samples were collected using a low-volume sampler (LVS) and indoor dust was collected using a soft brush. Inductively coupled plasma spectrometry (ICP-MS) was used to determine the concentration of heavy metals, while the concentration of cations and anions was determined by atomic absorption spectrometer (AAS) and ion chromatography (IC), respectively. The concentration of PM₁₀ recorded in the building throughout the sampling period ranged from 20 ± 10 μgm^?3 to 80 ± 33 μgm^?3. The composition of heavy metals in PM₁₀ and indoor dust were dominated by zinc (Zn), followed by lead (Pb), copper (Cu), and cadmium (Cd). Principle component analysis (PCA) and multiple linear regression (MLR) showed that the main sources of pollutants in PM₁₀ came from indoor renovations (73.83%), vehicle emissions (16.38%), earth crust sources (9.68%), and other outdoor sources (0.11%). For indoor dust, the pollutant source was mainly earth crust. This study suggests that chemometrics can be used for forensic investigation to determine the possible sources of indoor contaminants within a public building.     

An integrated approach for the benchmarking of production facilities’ environmental performance: data envelopment analysis and life cycle assessment

Environmental impacts have become an important consideration in the manufacturing industry due to increasing public pressure for environment protection and the requirements of recently launched legislations. Data envelopment analysis (DEA) is a widely adopted methodological approach for the benchmarking of the relative efficiency of different production units. Changes in production efficiency may affect environmental impacts. DEA can be used for identifying the most efficient production facility and hence, the environmental impacts generated from the different production lines can then be benchmarked. Life cycle assessment (LCA) is carried out to quantify the full environmental impacts of a product from ‘cradle to grave’. The integration of LCA with DEA, efficiency and environmental impact of different production processes for a certain family of products can be evaluated and benchmarked. The proposed two-stage approach can help to reduce the aggregate environmental impacts of the manufacturing phase and is used to benchmark the environmental performance of several production lines in a manufacturing company.     

A review of bioretention components and nutrient removal under different climates—future directions for tropics

Bioretention systems have been implemented as stormwater best management practices (BMPs) worldwide to treat non-point sources pollution. Due to insufficient research, the design guidelines for bioretention systems in tropical countries are modeled after those of temperate countries. However, climatic factors and stormwater runoff characteristics are the two key factors affecting the capacity of bioretention system. This paper reviews and compares the stormwater runoff characteristics, bioretention components, pollutant removal requirements, and applications of bioretention systems in temperate and tropical countries. Suggestions are given for bioretention components in the tropics, including elimination of mulch layer and submerged zone. More research is required to identify suitable additives for filter media, study tropical shrubs application while avoiding using grass and sedges, explore function of soil faunas, and adopt final discharged pollutants concentration (mg/L) on top of percentage removal (%) in bioretention design guidelines.

     

Application of biochar in advanced oxidation processes: supportive,adsorptive, and catalytic role

Environmental Science and Pollution Research - The advanced oxidation processes (AOPs), especially sulphate radical (SO4•−)–based AOPs (SR-AOPs), have been considered more...     

Seasonal variation in the acute effects of ozone on premature mortality among elderly Japanese

We conducted a multicity time-series study using monitoring data to assess seasonal patterns of short-term ozone–mortality association among elderly aged 65 years and over in Japan. Daily exposure to ambient ozone was computed using hourly measurements of photochemical oxidants available at multiple monitoring stations in each city. Effects of ozone on daily all-cause non-accidental, cardiovascular, and respiratory mortality were estimated using distributed lag linear models, controlling for confounding by temporal, day of the week, temperature, and flu epidemics. City-level effect estimates were combined using inverse variance meta-analysis. In spring and autumn, a 10-ppbv increase of daily maximum 8-h average ozone concentration in the previous 3 days was associated with 0.69 % (95 % confidence interval (CI): 0.27–1.10), 1.07 % (0.34–1.82), and 1.77 % (0.78–2.77) increases in daily all-cause, cardiovascular, and respiratory mortality, respectively. Forward displacement of respiratory mortality was large during the cold season despite lower ozone concentration. Results were generally independent of fine particulate matter and nitrogen dioxide. Findings suggest significant mortality effects of short-term ozone exposure among the elderly during the moderate season. Those with underlying respiratory diseases were susceptible, even during winter.     

Biocompatible Polyurethane Scaffolds Prepared from Glycerol Monostearate-Derived Polyester Polyol

Biodegradable polyester polyol was synthesized from oleochemical glycerol monostearate (GMS) and glutaric acid under a non-catalyzed and solvent-free polycondensation method. The chemical structure of GMS-derived polyester polyol (GPP) was elucidated by FTIR, ¹H and ¹³C NMR, and molecular weight of GPP was characterized by GPC. The synthesized GPP with acid value of 3.03 mg KOH/g sample, hydroxyl value of 115.72 mg KOH/g sample and M_n of 1345 g/mol was incorporated with polyethylene glycol (PEG) and polycaprolactone diol (PCL diol) to produce a water-blown porous polyurethane system via one-shot foaming method. The polyurethanes were optimized by evaluating glycerol as a crosslinker, silicone surfactant and water blowing agent on tensile properties of polyurethanes. All polyurethanes underwent structural change, and crystalline hard segments of polyurethanes were shifted to higher temperature suggested that hard segments undergone re-ordering process during enzymatic treatment. In terms of biocompatibility, polyurethane scaffold produced by reacting 100% w/w of GPP with isophorone diisocyanate and additives showed the highest cells viability of 3T3 mouse fibroblast (94%, day 1), and MG63 human osteosarcoma (107%, day 1) and better cell adhesion as compared to reference polyurethane produced by only PEG and PCL diol (3T3 cell viability: 8%; MG63 cell viability: 2%). The current work demonstrated GPP synthesized from renewable and environmental friendly resources produced polyurethanes that allows improvement in physico-chemical, mechanical and biocompatibility properties. By blending with increasing content of GPP, the water-blown porous polyurethane scaffold has shown great potential as biomaterial for soft and hard tissue engineering.     

The safety implications of vehicle seat adjustments

INTRODUCTION: The goal of this study was to gather information on the preferred front seat position of vehicle occupants and to determine the impact of variation in seat position on safety during crashes. METHOD: The study evaluated the relationship between seat position and occupant size using the chi-square test and compared the risk of severe injury for small females and large males with regard to forward and rearward seat position using logistic regression. RESULTS: While smaller drivers sat closer to the steering wheel than larger drivers, front passengers of all sizes used similar seat positions. Additionally, the risk of injury was higher for small, unbelted females in rearward seat positions and large males (belted and unbelted) in forward seat positions. CONCLUSIONS: Occupants who adjust their seats to positions that are not consistent with required federal tests are at a greater risk for severe injury in a crash.     

Challenges and needs for process safety in the new millennium

Process industries have made quite a bit of progress in process safety since the tragic night of December 2, 1984 in Bhopal. Nonetheless, incidents continue to occur on a regular basis due to insufficient understanding of the urgency to identify best practices and drive for process safety improvements in the organization. This paper addresses some of the critical challenges in implementing effective safety programs: (a) failure to learn from past incidents and to capture those lessons into process design, procedures, training, maintenance, and other programs, (b) insufficient attention to leading indicators, and (c) an increase in complexity of process operations and lack of communication. In the presence of these challenges, there is a great need to develop better solutions by utilizing good science based approaches and best practice studies. Potential research areas include, but are not limited to, incident database analysis, reactive chemicals, inherently safer design, combustible dust explosion, facility siting, and the flammability of fuel mixtures and aerosols. In addition, an example was presented on LNG industry safety to illustrate that science-based research is needed to ensure the safe operation and to avoid or mitigate unintended consequences.