Brominated flame retardants and polychlorinated biphenyls in fish from the river Scheldt, Belgium

Levels of polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDs), and polychlorinated biphenyls (PCBs) were measured in several fish species originating from the river Scheldt (Belgium). Five sampling locations were chosen in a highly industrialized area along the river, while two ponds in the vicinity of the river served as reference sites. The present study is a follow-up of a survey performed in 2000 which reported extremely high levels of PBDEs and HBCDs in eel (Anguilla anguilla) collected from the same region (Oudenaarde, Flanders). The sum of tri- to hepta-BDE congeners (2270+/-2260 ng/g lipid weight (lw), range 660-11500 ng/g lw) and total HBCDs (4500+/-3000 ng/g lw, range 390-12100 ng/g lw) were one order of magnitude higher than levels usually reported from freshwater systems, indicating the presence of point sources. In most samples, levels of total HBCDs were higher than those of PBDEs, probably due to the high density of factories using HBCD as an additive brominated flame retardant (BFR). The high values of HBCDs were confirmed by both gas- and liquid-chromatography-mass spectrometry. Although BFR levels were between the highest ever reported in freshwater ecosystems, PCBs could be detected at even higher concentrations (16000+/-14300 ng/g lw, range 3900-66600 ng/g lw), being among the highest levels recorded in Belgium. The inter-sampling site variation of PBDEs, HBCDs and PCBs was comparable. All locations presented similar PBDE congener profiles, with BDE 47 being the dominant congener, followed by BDE 100, BDE 99 and BDE 49, probably originating from the former use of the penta-BDE technical mixture. In order to estimate the impact of these point sources on human exposure, we further focussed on eels which showed a considerable decrease in the PBDE and HBCD levels between 2000 and 2006. Due to the wide span in concentrations between the different sampling locations, a variable contribution to the total human exposure through local eel consumption was estimated. The calculated daily intake ranged from 3 ng to 330 ng PBDEs/day for normal eel consumers, but was as high as 9800 ng PBDEs/day for anglers, which may be considered at risk.     

Modeling emissions for three-dimensional atmospheric chemistry transport models

Poor air quality is still a threat for human health in many parts of the world. In order to assess measures for emission reductions and improved air quality, three-dimensional atmospheric chemistry transport modeling systems are used in numerous research institutions and public authorities. These models need accurate emission data in appropriate spatial and temporal resolution as input. This paper reviews the most widely used emission inventories on global and regional scales and looks into the methods used to make the inventory data model ready. Shortcomings of using standard temporal profiles for each emission sector are discussed, and new methods to improve the spatiotemporal distribution of the emissions are presented. These methods are often neither top-down nor bottom-up approaches but can be seen as hybrid methods that use detailed information about the emission process to derive spatially varying temporal emission profiles. These profiles are subsequently used to distribute bulk emissions such as national totals on appropriate grids. The wide area of natural emissions is also summarized, and the calculation methods are described. Almost all types of natural emissions depend on meteorological information, which is why they are highly variable in time and space and frequently calculated within the chemistry transport models themselves. The paper closes with an outlook for new ways to improve model ready emission data, for example, by using external databases about road traffic flow or satellite data to determine actual land use or leaf area. In a world where emission patterns change rapidly, it seems appropriate to use new types of statistical and observational data to create detailed emission data sets and keep emission inventories up-to-date.

Implications: Emission data are probably the most important input for chemistry transport model (CTM) systems. They need to be provided in high spatial and temporal resolution and on a grid that is in agreement with the CTM grid. Simple methods to distribute the emissions in time and space need to be replaced by sophisticated emission models in order to improve the CTM results. New methods, e.g., for ammonia emissions, provide grid cell–dependent temporal profiles. In the future, large data fields from traffic observations or satellite observations could be used for more detailed emission data.     

Size distribution of polycyclic aromatic hydrocarbons in a roadway tunnel in Lisbon, Portugal

Atmospheric aerosols of four aerodynamic size ranges were collected using high volume cascade impactors in an extremely busy roadway tunnel in Lisbon (Portugal). Dust deposited on the tunnel walls and guardrails was also collected. Average particle mass concentrations in the tunnel atmosphere were more than 30 times higher than in the outside urban background air, revealing its origins almost exclusively from fresh vehicle emissions. Most of the aerosol mass was concentrated in submicrometer fractions (65%), and polycyclic aromatic hydrocarbons (PAH) were even more concentrated in the finer particles with an average of 84% of total PAH present in sizes smaller than 0.49 μm. The most abundant PAH were methylated phenanthrenes, fluoranthene and pyrene. About 46% of the total PAH mass was attributed to lower molecular weight compounds (two and three rings), suggesting a strong influence of diesel vehicle emissions on the production of local particulate PAH. The application of diagnostic ratios confirmed the relevance of this source of PAH in the tunnel ambient air. Deposited dust presented PAH profiles similar to the coarser aerosol size range, in agreement with the predominant origin of coarser aerosol particles from soil dust resuspension and vehicle wear products.     

Conjunctive Vadose and Saturated Zone Monitoring for Subsurface Contamination

A comprehensive subsurface monitoring program should include contaminant detectors in both the vadose and saturated zones. Vadose zone detectors can provide an early warning of an impending groundwater contamination problem, and also yield information relevant to placing groundwater monitoring wells. Moisture probes, gas monitoring wells, and pore-liquid samplers deployed in the vadose zone complement groundwater detection wells. The objective(s) of a monitoring program, spatial-scales, and hydrogeology are important considerations for designing subsurface monitoring networks. Often, these networks are used to detect potential releases or characterize existing contamination beneath land-based waste storage facilities. A case study in Santa Barbara, California, U.S.A., illustrates the utility of vadose zone monitoring in characterizing a gasoline contamination problem and guiding the placement of groundwater monitoring wells.     

A comparative performance evaluation of the AURAMS and CMAQ air-quality modelling systems

A harmonized comparative performance evaluation of A Unified Regional Air-quality Modelling System (AURAMS) v1.3.1b and Community Multiscale Air Quality (CMAQ) v4.6 air-quality modelling systems was conducted on the same North American grid for July 2002 using the same emission inventories, emissions processor, and input meteorology.Comparison of AURAMS- and CMAQ-predicted O₃ concentrations against hourly surface measurement data showed a lower normalized mean bias (NMB) of 20.7% for AURAMS versus 46.4% for CMAQ. However, AURAMS and CMAQ had more similar normalized mean errors (NMEs) of 46.9% and 54.2%, respectively. Both models did similarly well in predicting daily 1-h O₃ maximums; however, AURAMS performed better in calculating daily minimums. CMAQ's poorer performance for O₃ is partly due to its inability to correctly predict nighttime lows.Total PM_2.5 hourly surface concentration was under-predicted by both AURAMS and CMAQ with NMBs of ?10.4% and ?65.2%, respectively. However, as with O₃, both models had similar NMEs of 68.0% and 70.6%, respectively. In general, AURAMS performance was better than CMAQ for all major PM_2.5 species except nitrate and elemental carbon. Both models significantly under-predicted total organic aerosols (TOAs), although the mean AURAMS concentration was over four times larger than CMAQ's. The under-prediction of TOA was partly due to the exclusion of forest-fire emissions. Sea-salt aerosol made up approximately 50.2% of the AURAMS total PM_2.5 surface concentration versus only 6.2% in CMAQ when averaged over all grid cells. When averaged over land cells only, sea-salt still contributed 13.9% to the total PM_2.5 mass in AURAMS versus 2.0% in CMAQ.     

The dynamic nature of cognition during wayfinding

Much of our day-to-day wayfinding behaviour takes place in familiar large-scale urban environments, yet there is a dearth of studies examining how wayfinding unfolds on a second-by-second basis in this context. Here we used a retrospective verbal report protocol, eye tracking and a highly accurate virtual reality simulation of a real city (London, UK) to examine this issue. Subjects, who were taxi drivers, were able to produce extremely detailed accounts of what they had been thinking during wayfinding, which were validated by independent eye-tracking data. There was a high degree of consistency in the types of thoughts across subjects, permitting classification into a number of distinct categories. Moreover, it was possible to quantify the number of thoughts in each category, their durations and temporal order. Detailed analysis of the verbal reports provided new insights into the processes and strategies involved, and highlighted a greater range of thoughts than has previously been reported in studies of wayfinding. By analysing the temporal order of thoughts it was possible to identify specific relationships between categories. Some of these relationships were predicted by current cognitive models of wayfinding, others were novel, thus shedding new light on how navigation unfolds in a busy city.     

Analysis of PM2.5and PM10 in the Atmosphere of Mexico City during 2000-2002

Abstract

During the last 10 years, high atmospheric concentrations of airborne particles recorded in the Mexico City metropolitan area have caused concern because of their potential harmful effects on human health. Four monitoring campaigns have been carried out in the Mexico City metropolitan area during 2000-2002 at three sites: (1) Xalos-toc, located in an industrial region; (2) La Merced, located in a commercial area; and (3) Pedregal, located in a residential area. Results of gravimetric and chemical analyses of 330 samples of particulate matter (PM) with an aerodynamic diameter less than 2.5 μm (PM_2.5) and PM with an aerodynamic diameter less than 10 μm (PM₁₀) indicate that (1) PM_2.5/PM₁₀ average ratios were 0.42, 0.46, and 0.52 for Xalostoc, La Merced, and Pedregal, respectively; (2) the highest PM_2.5 and PM₁₀ concentrations were found at the industrial site; (3) PM_2.5 and PM₁₀ concentrations were lower at nighttime; (4) PM_2.5 and PM₁₀ spatial averages concentrations were 35 and 76 μg/m³, respectively; and (5) when the PM_2.5 standard was exceeded, nitrate, sulfate, ammonium, organic carbon, and elemental carbon concentrations were high. Twenty-four hour averaged PM_2.5 concentrations in Mexico City and Sao Paulo were similar to those recorded in the 1980s in Los Angeles. PM₁₀ concentrations were comparable in Sao Paulo and Mexico City but 3-fold lower than those found in Santiago.     

Application of water quality indices and analysis of the surface water quality monitoring network in semiarid North-Central Chile

Surface water quality has increasing importance worldwide and is particularly relevant in the semiarid North-Central Chile, where agriculture and mining activities are imposing heavy pressure on limited water resources. The current study presents the application of a water quality index in four watersheds of the 29°-33°S realm for the period 1999-2008, based on the Canadian Council of Ministers for the Environment approach and the Chilean regulation for irrigation water quality. In addition, two modifications to the index are tested and a comprehensive characterization of the existing monitoring network is performed through cluster analysis. The basins studied show fairly good water quality in the overall, specially the Limarí basin. On the other hand, the lower index values were obtained for the headwaters of Elqui, associated with the El Indio mining district. The first modification of the indicator (i.e., to consider parameters differentially according to their effect on human health or the environment) did not produce major differences with respect to the original index, given the generally good water quality. The second modification (i.e., to consider as threshold values the more restrictive figures derived from a set of regulations) yielded important differences in the indicator values. Finally, an adequate characterization of the monitoring network was obtained. The results presented spatial coherence and the information can be used as a basis for the optimization of the monitoring network if required.     

Ecotoxicological risk assessment linked to the discharge by hospitals of bio-accumulative pharmaceuticals into aquatic media: The case of mitotane

The release of hospital wastewater into the urban sewer networks contributes to the general contamination of aquatic media by pharmaceutical residues. These residues include bio-accumulative pharmaceuticals that lead to increased risk for ecosystems because they can concentrate in organisms and food chains, and therefore reach toxic levels. In order to assess the ecotoxicological risks linked to this particular category of residues, we have developed a specific method, by combining a theoretical calculation of pollutant concentrations in organisms to estimate Body Residue (BR), and ecotoxicity biomarkers in fish cell lines, enabling the calculation of a Critical Body Residue (CBR). This method finally results in the calculation of a specific risk quotient (Qb = BR/CBR), characterizing the risk linked to this type of pollutant. This method was applied to mitotane, a bio-accumulative pharmaceutical typically found in hospital wastewater, in the framework of an exposure scenario corresponding to the discharge of all the hospital wastewaters into the Rhone River which flows through the city of Lyon, France. This approach leads to risk quotients (Qb and Qbg) much higher than those found with the classical approach, i.e. Q = PEC/PNEC (Predictive Environmental Concentration/Predictive Non Effect Concentration) = 0.0006. This difference in the appreciation of risk is important when using cytotoxicity as the criterion for measuring the toxicity of mitotane (Qb = 0.056) and it is even greater when the criterion used is genotoxicity (Qbg = 6.8). This study must be now consolidated by taking the biomagnification of the pharmaceuticals into consideration.     

Presence, distribution, and origins of polycyclic aromatic hydrocarbons (PAHs) in sediments from Bahía Blanca estuary, Argentina

This paper is the first comprehensive survey of polycyclic aromatic hydrocarbons (PAHs) in coastal sediments in Bahia Blanca, Argentina, and provides useful information on their levels of concentration, composition, and sources of these pollutants. The total concentrations of PAHs ranged from 15 to 10,260 ng g^???1. The highest contents (mean 3,315 ng g^???1) of total PAHs in marine sediments were found in the inner channels of the estuary, while the lower ones (204 ng g^???1) belong to samples collected far away from contamination sources. The global average recorded in this study (1,500 ng g^???1) indicates that the studied area lies within the referenced category of industrialized coastal zones under chronic pollution. The diagenetic PAH contribution was found to be negligible at all sampled locations; however, the calculation of molecular ratios determined an overimposition of pyrolitic PAHs over the petrogenic input. Further, the use of principal components analysis (PCA) clearly separated ring group compounds and enabled the determination of pyrolitic/combustion PAHs dominancy.