Characterization of aromatic hydrocarbon formation from pyrolysis of polyethylene-polystyrene mixtures

Design and operating parameters, and cause and effect relationships among feedstocks and products in the pyrolysis of waste polymers are needed if this method of processing is to be used for energy recovery from waste plastics. The purpose of this study was to quantify the effect of various operating factors for the pyrolysis of common polymeric wastes. Experiments were performed using a conventional retort tube as a batch reactor. The operating factors considered were temperature and reaction time at constant heating rate. High density polyethylene (PE) and polystyrene (PS), the most common plastic waste in Korea, were used singly and in mixture.The pyrolysis time for maximum oil production from a PE-PS mixture was shorter than in the case of PE alone, showing an enhancement effect from the PS. The maximum gas production time from PE-PS mixtures was shorter than for PE alone at 500° C; above 600° C, this does not occur. Small aromatic compounds (which can be valuable) are produced at maximum with an 1:1 mixture of PE and PS at 600° C, showing the possibility of process control for the maximum recovery of desirable pyrolysis products. The maximum yield of toluene, xylene, styrene, and 1-propenyl benzene were 8.6, 8.9, 51.0 and 7.4 wt.% of feed for pyrolysis PS at 700° C, respectively. For naphthalene, it was at 700° C with 1:1 PE:PS (by wt.). The maximum recovery was 1.3 wt.%. Diels-Alder theory can explain the formation of aromatic compounds in the pyrolysis products. The yield of these secondary pyrolysis products can be controlled by reaction time, pyrolysis temperature and mixing ratio of plastic wastes in the pyrolysis feed.     

Removal of arsenic in tailings by soil flushing and the remediation process monitoring

In order to investigate the optimum conditions for the application of soil flushing of arsenic, a batch test was carried out using EDTA at various concentration and pH levels. Based on the optimum condition derived from the batch test, a column test was conducted to examine the feasibility of the soil-flushing technology under field-equivalent conditions. In this column test, a low flushing solution flow rate showed a significantly higher As removal efficiency (71.6%) than a high flow rate (56.3%). TCLP (toxicity characteristic leaching procedure) and a seed germination test were carried out to monitor the toxicity both during and after the treatment. The finally treated tailings were shown to be significantly remediated, having a reduced toxicity by both the TCLP and seed germination tests.     

The Conservation Status and Conservation Strategy of Picea neoveitchii

Picea neoveitchii is an endemic species in China. It had been listed as an endangered species in red data books. It scatters in several locations of south slope of the Qinling Mountain of China. Upon reviewing the related literature, discussing with leading scholars on gymnosperm, ecology and plant conservation, the field survey was carried out in four locations. There are eleven mature individuals and two seedlings surviving in its natural habitats. With the survey of quadrat method in four locations, related community index were calculated such as relative important value （RIV）, species richness, similarity index, diversity index and evenness index etc. The community could be sorted and characterized as three groups based on the community parameters. The analysis of vegetation table elucidates that Picea neoveitchii is a dominant species with low grouping rate in most surveyed sites. The RAPD analysis shows target species has intraspecific genetic variability. The estimation of Shannon＇s phenotypic diversity index （Ho） also explains the difference of genetic variations of different locations. Due to the lack of enough knowledge and professional guide of conservation biological perspective, Picea neoveitchii had been clear-cut for timber production. The extent of occurrence and area of occupancy declined rapidly from 1950s to 1990s. According to the Conservation Category guideline proposed by the World Conservation Union, the conservation status of Picea neoveitchii was reevaluated as Critically Endangered （CR） B2b C2a D. Upon research in areas of ecology, molecular biology, cluster analysis of environmental parameters, a practical conservation strategy is recommended in this research.     

Mutagenic and carcinogenic potency of extracts from diesel related environmental emissions: Simultaneous morphological transformation and mutagenesis in BALB/c 3t3 cells

Particulate extracts from six different environmental emission sources were assayed for genotoxic activity in mouse BALB/c 3T3 clone A31-1 cells. All compounds were tested simultaneously for both transforming and mutagenic (induction of ouabain-resistance) potential with and without exogenous metabolic activation in the form of a 9000 × g postmitochondrial hepatic supernatant fraction from Aroclor-1254 induced Fischer 344 rats. Dichloromethane particulate extracts from the exhaust of two light duty diesel engines (Oldsmobile and Nissan), one heavy duty diesel engine (Caterpillar) and one late model gasoline engine (Mustang II) were assayed in an identical manner to particulate extracts from the emissions of a roofing tar pot and a coke oven. No clear dose-dependent responses were observed, but several of the samples showed significant transforming and mutagenic activity. A qualitative ranking system showed the activity of these particulate extracts for either mutagenesis or transformation was: coke oven = Mustang II gasoline engine > Nissan diesel engine > roofing tar. Particulate extracts from the Oldsmobile diesel engine and the Caterpillar diesel engine showed essentially no activity.     

Radium isotopes in the Ulsan Bay

In order to estimate the fluxes of Ra isotopes, we measured 224Ra, 226Ra, and 228Ra activities in the Ulsan Bay mixing zone. The convex upwards curvature of the plot of Ra isotope activities versus salinity for the mixing zone suggests that Ra isotopes are supplied from particles entering the mixing zone from both the river and bottom sediments. This addition increases the estuarine flux of 226Ra and 228Ra to the outer sea by factors of 15 and 95 over the flux attributable to Ra dissolved in the riverine water alone. In order to estimate the residence time of the water in Ulsan Bay, we applied a mass balance model to the distribution of 224Ra and 226Ra activities in the Ulsan Bay mixing zone with the inflow from the Taehwa River. The obtained residence times of the waters in the Ulsan Bay were estimated to be 6.8-11.4 d. The waters in the upper part of the estuary have long residence times whereas those in the lower part, in contact with the open sea, have shorter residence times. The mean residence time of the water in the Ulsan Bay was estimated to be 9.1 d.     

Application of micrometeorological approaches to measure methane exchange in a dry paddy field in the western coast of Korea

The exchange processes of CH₄ were investigated in a paddy field in the Hari area of Kang Hwa Island over an 8 day period in late April 2002. The quantification of CH₄ fluxes was made under dry field condition of early spring by concurrently measuring its concentrations (at the two heights of 1 and 5 m) and the relevant micrometeorological parameters. To help elucidate the factors determining the mobilization characteristics of CH₄, the results of our measurement data were examined using a number of approaches. The results of the trajectory analysis indicated that its concentration changed very sensitively with the influence of different source types, as seen from the air mass movement patterns. The concentrations and fluxes of methane, when examined over this short-term scale, showed moderately strong patterns across 24 h period in which higher values tend to occur during morning or evening. The overall results of our field measurements suggest that CH₄ exchange processes in the paddy area proceeded in a fairly complicated manner. The study area behaved as a net source of CH₄ to the atmosphere with a net daily emission rate of 3.6 mg m⁻² despite the fact that downward deposition was observed more frequently than upward emission.     

The exceedance patterns of air quality criteria: a case study of ozone and nitrogen dioxide in Seoul, Korea between 1990 and 2000

In this study, the environmental behavior of two major airborne pollutants, ozone and nitrogen dioxide, was investigated with respect to their exceedance patterns of air quality criteria. For this purpose, we used data sets collected from a total of 31 air quality monitoring stations dispersed across the Seoul metropolitan city between 1990 and 2000. In the case of NO(2), the frequency of hourly exceedance data sets exhibited little changes in the early 90s. However, it increased dramatically after 1995, probably in compliance with a rapid increase in the total number of automobiles. Likewise, the daily exceedance of O(3) in the early 90s was not significant, approaching 100 cases (except in 1994). However, its total quantity began to surpass 300 cases since around 1996. Comparison of those exceedance data was also made among spatially divided data groups. In the case of NO(2), the occurrence of exceedance data was dominated by the western part of the city in both magnitude and frequency. On the other hand, that for O(3) was characterized by notably strong occurrences in the eastern counterpart. The overall results of our analysis of the NO(2) and O(3) exceedance data sets indicate an inextricable linkage between the two pollutants in association with geographical and meteorological factors.     

Contents of chlordane-, PCB- and DDT-compounds and the biotransformation capacity of fishes in the lake area of eastern Finland

Fish samples (perch, roach, vendace and rainbow trout) from the lake area in castern Finland were found to be contaminated not only with PCB- and DDT-compounds but also with chlordane-compounds. The contents of pollutants were strongly species specific and were studied against the biotransformation capacity of the fishes. No chlordane compounds were found in rainbow trout, which is superior to the other species in its biotransformation capacity.     

In-situ electrochemical measurements of total concentration and speciation of heavy metals in acid mine drainage (AMD): assessment of the use of anodic stripping voltammetry

We assessed the use of anodic stripping voltammetry (ASV) for in-situ determinations of both total concentration and speciation of dissolved heavy metals (Cd, Cu, Pb and Zn) in acid mine drainage (AMD). In the Kwangyang Au–Ag mine area of South Korea, different sites with varying water chemistry within an AMD were studied with a field portable anodic stripping voltammeter. Anodic stripping voltammetry after wet oxidation (acidification) was very sensitive enough to determine total concentration of dissolved Cd because Cd was dominantly present as ‘labile’ species, whilst the technique was not so effective for determining total Cu especially in the downstream sites from the retention pond, due to its complexation with organic matter. For dissolved Pb, the concentrations determined by ASV after wet oxidation generally agreed with those by ICP-AES. In the downstream samples (pH>5), however, ASV data after wet oxidation were lower than ICP-AES data because a significant fraction of dissolved Pb was present in those samples as ‘inert’ species associated with colloidal iron oxide particles. The determination of total dissolved Zn by ASV after wet oxidation appeared to be unsatisfactory for the samples with high Cu content, possibly due to the interference by the formation of Zn–Cu intermetallic compounds on the mercury coated electrode. In AMD samples with high dissolved iron, use of ultraviolet irradiation was not effective for determining total concentrations because humate destruction by UV irradiation possibly resulted in the removal of a part of dissolved heavy metals from waters through the precipitation of iron hydroxides.     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.