铬渣的热解无害化处理

采用热解工艺无害化处理铬渣,探讨了稻秆在铬渣无害化处理中的作用.研究了热解温度、稻秆与铬渣质量比、铬渣粒径及保温时间对铬渣热解无害化处理的影响,并分析了热解前后热解产物中铬元素形态的变化.结果表明,热解工艺能有效地将铬渣中Cr(Ⅵ)还原,稻秆热解过程中产生的气相挥发分对Cr(Ⅵ)的还原起核心作用.较为适宜的热解条件:热解温度为400 ℃,稻秆与铬渣质量比为0.10,铬渣粒径<2 000 μm,保温时间为10 min.在该热解条件处理下,热解产物中的Cr(Ⅵ)质量浓度为121 mg/kg,低于热解前铬渣中的Cr(Ⅵ)(3 400 mg/kg).热解后,可交换态及碳酸盐结合态铬含量降低,大部分铬转化成了稳定的有机结合态和残渣态,极大地降低了铬渣的危害.第一作者:张大磊,男,1982生,博士研究生,研究方向为固体废弃物热处理.     

光合细菌强化二级流化床工艺处理焦化废水的研究

采用厌氧酸化加二级流化床组合工艺处理焦化废水。一级反应器内光合细菌与兼性厌氧菌处于共生状态，二级反应器内光合细菌与亚硝酸细菌处于共生状态。一级反应器内光合细菌有充分的小分子有机酸可降解并形成二次酸化，在二级反应器内完成进一步降解。结合反应条件：温度，pH，DO和基质浓度等，将二级反应器内硝化反应控制在亚硝化阶段，有效地保证了废水中碳源的利用。稳定运行了60 d，结果显示，出水COD和NH₃-N浓度分别为105～135 mg/L和14～20 mg/L，去除率分别稳定在90.3%～92.5%和92%～95%。TN去除率稳定在83%～86%。酚、氰化物和BOD5的去除率均在95%以上。     

Occurrence and characterization of selected organochlorine contaminants in outdoor dust collected from Xinxiang,a fast developing city in North China

As facile “environmental media”, the outdoor dust may reflect the changes of contaminants in environment more promptly. In the present study, selected organochlorine contaminants (OCs) include hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs), hexachlorobenzene (HCB), and pentachlorobenzene (PeCB) were detected in 20 outdoor dust samples collected from Xinxiang City. The concentrations of ΣHCHs, ΣDDTs, HCB, and PeCB in dust were in the range of 0.18–5.05 ng/g dry weight, 0.44–13.50 ng/g dry weight, 0.13–51.61 ng/g dry weight and ND-0.74 ng/g dry weight, respectively. Long-range transport, historical use, and recent impact of impure pesticides might be the main sources of OCs in the outdoor dust. The results of this study indicated that impure pesticide application maybe an important source of DDTs and HCB in the environment.     

Enhanced degradation of azo dye alizarin yellow R in a combined process of iron–carbon microelectrolysis and aerobic bio-contact oxidation

Purpose

With the aim of enhanced degradation of azo dye alizarin yellow R (AY) and further removal of the low-strength recalcitrant matter (LsRM) of the secondary effluent as much as possible, our research focused on the combination of aerobic bio-contact oxidation (ABO) with iron/carbon microelectrolysis (ICME) process.

Materials and methods

The combined ABO (with effective volume of 2.4?l) and ICME (with effectively volume of 0.4?l) process were studied with relatively short hydraulic retention time (HRT) of 4 or 6?h.

Results

At the HRT of 6?h with the reflux ratio of 1 and 2, the AY degradation efficiency in the final effluent was >96.5%, and the total organic carbon (TOC) removal efficiency were 69.86% and 79.44%, respectively. At the HRT of 4?h and the reflux ratio of 2, TOC removal efficiency and AY degradation efficiency were 73.94% and 94.89%, respectively. The ICME process obviously enhanced the total AY removal and the generated micromolecule acids and aldehydes then that wastewater backflow to the ABO where they were further biodegraded.

Conclusion

The present research might provide the potential options for the advanced treatment azo dyes wastewater with short HRT and acceptable running costs.     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.     

秦皇岛山羊寨动物群及其生存环境的研究

1981年，笔者在泰皇岛市抚宁县山羊寨村小南山发现大量动物化石，经鉴定共有32种动物，其中绝灭种7个，时代为新生代第四纪中更新世，绝对年龄为（18±2）万年至（20±2）万年，相当于北京周口店动物群后期。研究发现：其生活在低山丘陵及其河谷；当时的气候是温和湿润的温带气候，但已向凉干转化；植被为温带落叶阔叶林。     

Physical Properties, Photo- and Bio-degradation of Baked Foams Based on Cassava Starch, Sugarcane Bagasse Fibers and Montmorillonite

The objectives of this work were to develop biodegradable trays from cassava starch, sugarcane fibers and Na-montmorillonite (Na-MMT) using a baking process and to study the effects of these components on the physical properties, photo- and bio-degradation of the trays. The sample F20 (produced with 20 g fiber/100 g formulation) showed the maximum yield production (100 %). All formulations resulted in well-shaped trays with densities between 0.1941 and 0.2966 g/cm³. The addition of fibers and Na-MMT resulted in less dense and less rigid trays compared to control samples (only starch). The studied processing conditions resulted in good nanoclay dispersion, leading to the formation of an exfoliated structure. The evaluation of the photo-degradation stability of the trays under UV exposure for 336 h showed that a sample produced with a specific combination of fiber and nanoclay (20 g fiber and 5 g nanoclay/100 g formulation) had the highest loss in stress at break (91 %). Biodegradation assays showed that Control trays (starch) and F20 (20 g fiber/100 g formulation) lost a greater percentage of their weight after 90 days of incubation in soil, with losses of up to 85.50 and 82.70 %, respectively.     

模拟黑水的生物处理

针对以糖蜜配制的半人工黑水生物处理时除磷效率下降和污泥膨胀的现象,利用序批式反应器(SBR)进行了实验分析,比较了以蔗糖和糖蜜为主要碳源时除磷效果的差异,并探讨了污泥膨胀发生的原因。研究表明,以糖蜜为主要碳源配制模拟黑水时的除磷效果比蔗糖为碳源时差,主要是由于GAOs的竞争性代谢所致。以糖蜜为碳源的条件下,污泥的胞外聚合物含量是正常活性污泥的一倍以上,导致污泥沉降性能变差;糖蜜碳源时的夏季高温条件下丝状菌大量生长也是导致污泥膨胀的重要原因。     

高效脱硫菌的筛选及其性能研究

从高硫污染的活性污泥中富集培养，分离纯化得到一株可以降解噻吩的菌株s_4，并对该菌株的形态特征进行观察。应用Design—Expert8．0．5b软件进行响应面优化实验，研究了反应时间、噻吩浓度、微生物浓度3个因素的组合对菌株s_4脱硫效果的影响，并拟合得到多元二次回归方程，得出最佳实验条件。拟合结果表明，当反应时间27．46h，噻吩浓度为1．04％，微生物浓度4．04％时，预测噻吩降解率为14．8％，通过验证得最佳条件下的降解率为14．3％，与预测值相符。     

电旋风除尘模型实验研究

本研究试图将电除尘器与旋风除尘器组合为一体,以求取得较高的除尘效率,并利用旋转气流实现自动清灰。本文介绍了切向进气直流式电旋风除尘的模型试验,通过实测不同工况下的除尘效率和压力损失,应用经典除尘理论,建立了相应的数学模型。