The qiongshan earthquake of july 1605

In 1605 a destructive earthquake affected the northern region of Hainan Island and adjacent parts of the Chinese mainland. Based on a detailed analysis of contemporary chronicles, the authors present a revision of the effects of the earthquake, and show that a sequence of strong shocks throughout 1605 caused cumulative damage and relatively heavy loss of life in Qiongshan. The subsidence of large areas of coast round Puqian Bay and Dongzhai Port is shown to be due to a combination of liquefaction caused by the shock, the occurrence of a typhoon associated with flooding and exacerbated by a high surge tide, as well as a long-term process of active tectonic movement in the area; the subsidence was not caused by downthrow of the earth's crust during the shock. Topographical changes in the area, traced from historical maps, suggest that subsidence is continuing, but a survey of the long-term seismicity of Hainan Island indicates that it is not an area of exceptional seismic risk.     

Measurement of dry deposition of ammonia on a forest

Ammonia concentration gradients above a Douglas fir canopy were measured from 16 August to 31 December 1989 by two automated high-precision thermodenuders at the location Speulderbos in The Netherlands. Concentration gradients were used to calculate the dry deposition flux of ammonia via flux-gradient theory. Meteorological data were obtained from a nearby tower. Ammonia concentrations were highly variable with highest values during the night. Concentration gradients were very small during daytime and quite large at night. Median values of the calculated deposition flux and deposition velocity were 0.1 microg m(-2) s(-1) and 3.2 cm s(-1) respectively (N=1624).     

Critical loads for Finnish lakes: comparison of three steady-state models

Three simple steady-state water-chemistry models are used to calculate critical loads of sulfur for lakes in Finland. Because of the high concentrations of organic matter in Finnish lakes, the influence of organic anions on the calculation of critical loads has been given special attention. The first two methods are well known ion-balance methods which have been used in many previous lake-acidification studies. The third method, developed for this study, includes the numerical solution of equilibrium equations for organic anions, inorganic carbon species and inorganic monomeric aluminum. The original pH and aluminum concentration of the lakes are estimated with this model, and a method to estimate the original acid neutralizing capacity (ANC) by simulating a Gran-titration is also tested on the lake data. Uncertainty in the predictions is estimated by varying the most critical model parameters.     

Effect of substituents in hydroxyl radical-mediated degradation of azo pyridone dyes: Theoretical approaches on the reaction mechanism

Understanding the degradation behavior of azo dyes in photocatalytic wastewater treatment is of fundamental and practical importance for their application in textile-processing and other coloration industries. In this study, quantum chemistry, as density functional theory, was used to elucidate different degradation pathways of azo pyridone dyes in a hydroxyl radical (HO^?)-initiated photocatalytic system. A series of substituted azo pyridone dyes were synthesized by changing the substituent group in the para position of the benzene moiety, ranging from strong electron-donating to strong electron-withdrawing groups. The effect of dye molecular structure on the photocatalytic degradation reaction mechanism was analyzed and quantification of substituent effects on the thermodynamic and kinetics parameters was performed. Potential energy surface analysis revealed the most susceptible reaction site for the HO^? attack. The calculated reaction barriers are found to be strongly affected by the nature of substituent group with a good correlation using Hammett σ_p constants and experimentally determined reaction rates. The stability of pre-reaction complexes and transition state complexes were analyzed applying the distortion-interaction model. The increased stability of the transition state complexes with the distancing from the substituent group has been established.     

Effects of Sphagnum moss and urban runoff on bioavailability of lead and zinc from acidic wetlands of the New Jersey pinelands

The effects of Sphagnum and urban runoff on the bioavailability of metals were tested by adding PbCl2 and ZnCl2 to laboratory microcosms constructed of peat substrate with or without live Sphagnum spp. and planted with Acer rubrum L. seedlings or Vaccinium macrocarpon Ait. shoots. We hypothesized that Sphagnum would increase bioavailability through its acidifying action, while urban runoff would decrease availability through increases in alkalinity. Metals were more available to the test plants treated with acidic swampwater than with alkaline runoff. Sphagnum moss caused increases in tissue concentrations in V. macrocarpon, but not in A. rubrum. The latter species took up more metals when grown on substrate from sites receiving runoff, whereas the former took up more metals from substrate from undisturbed sites, despite the lower substrate metal concentrations. Differences in uptake by the two species may reflect differences in their ability to root in the Sphagnum mat. The results demonstrate that Sphagnum spp. exerts strong species-specific effects on the uptake of metals by vascular plants, and that plant species native to acidic wetlands vary widely in their response to metals in the substrate.     

Antagonism and synergism between lead and zinc in amphibian larvae

Lead and zinc effects on Bufo arenarum larval survival were studied in single and combined treatments. On a weight basis, lead is about twice as toxic as zinc. The antagonism or synergism between these heavy metals is dose-dependent.     

Arsenic speciation in human hair: a new perspective for epidemiological assessment in chronic arsenicism

The analysis for arsenic in hair is commonly used in epidemiological studies to assess exposure to this toxic element. However, poor correlation between total arsenic concentration in hair and water sources have been found in previous studies. Exclusive determination of endogenous arsenic in the hair, excluding external contamination has become an analytical challenge. Arsenic speciation in hair appears as a new possibility for analytical assessing in As-exposure studies. This study applied a relative simple method for arsenic speciation in human hair based on water extraction and HPLC-HG-ICP-MS. The concentration of arsenic species in human hair was assessed in chronically As(V)-exposed populations from two villages (Esqui?a and Illapata) of the Atacama Desert, Chile. The arsenic concentrations in drinking water are 0.075 and 1.25 mg L(-1), respectively, where As(V) represented between 92 and 99.5% of the total arsenic of the consumed waters. On average, the total arsenic concentrations in hair from individuals of Esqui?a and Illapata were 0.7 and 6.1 microg g(-1), respectively. Four arsenic species, As(III), DMA(V), MMA(V) and As(V), were detected and quantified in the hair extracts. Assuming the found species in extracts represent the species in hair, more than 98% of the total arsenic in hair corresponded to inorganic As. On average, As(III) concentrations in hair were 0.25 and 3.75 microg g(-1) in Esqui?a and Illapata, respectively; while, the As(V) average concentrations were 0.15 and 0.45 microg g(-1) in Esqui?a and Illapata, respectively. Methylated species represent less than 2% of the extracted As (DMA(V)+ MMA(V)) in both populations. As(III) in hair shows the best correlation with chronic exposure to As(V) in comparison to other species and total arsenic. In fact, concentrations of As(total), As(III) and As(V) in hair samples are correlated with the age of the exposed individuals from Illapata (R= 0.65, 0.69, 0.57, respectively) and with the time of residence in this village (R= 0.54, 0.71 and 0.58, respectively).     

Microbiological characteristics in a zero-valent iron reactive barrier

Zero-valent iron (Fe⁰)-based permeable reactive barriertreatment has been generating great interest for passivegroundwater remediation, yet few studies have paid particularattention to the microbial activity and characteristics withinand in the vicinity of the Fe⁰-barrier matrix. The presentstudy was undertaken to evaluate the microbial population andcommunity composition in the reducing zone of influence byFe⁰ corrosion in the barrier at the Oak Ridge Y-12 Plantsite. Both phospholipid fatty acids and DNA analyses were usedto determine the total microbial population and microbialfunctional groups, including sulfate-reducing bacteria,denitrifying bacteria, and methanogens, in groundwater andsoil/iron core samples. A diverse microbial community wasidentified in the strongly reducing Fe⁰ environment despitea relatively high pH condition within the Fe⁰ barrier (up topH 10). In comparison with those found in the backgroundsoil/groundwater samples, the enhanced microbial populationranged from 1 to 3 orders of magnitude and appeared to increase from upgradient of the barrier to downgradient soil. Inaddition, microbial community composition appeared to change overtime, and the bacterial types of microorganismsincreased consistently as the barrier aged. DNA analysisindicated the presence of sulfate-reducing and denitrifyingbacteria in the barrier and its surrounding soil. However, theactivity of methanogens was found to be relatively low,presumably as a result of the competition by sulfate/metal-reducing bacteria and denitrifying bacteria because of the unlimited availability of sulfate and nitrate in the site groundwater. Results of this study provide evidenceof a diverse microbial population within and in the vicinity ofthe iron barrier, although the important roles of microbial activity, either beneficially or detrimentally, on the longevityand enduring efficiency of the Fe⁰ barriers are yet to be evaluated.     

Multivariate analysis of the bioaccumulation of polychlorinated biphenyls (PCBs) in the marine pelagic food web from the southern part of the Baltic Sea,Poland

The concentration, pattern, bioaccumulation and biomagnification features of many chlorobiphenyl congeners including non- and mono-ortho chlorine substituted members have been determined in a pelagic food chain including mixed phyto- and zooplankton, herring (Clupea harengus), harbour porpoise (Phocoena phocoena) and black cormorants (Phalacrocorax carbo sinensis) collected from the southern part of the Baltic Proper. TCDD (tetrachlorodibenzo-p-dioxin) toxic equivalents (TEQs) in plankton, herring, harbour porpoise and cormorants were 0.42, 5.3, 79 and 2,700 pg g(-1) lipid weight, respectively. Concentrations of total polychlorinated biphenyls (PCBs) in plankton, herring, harbour porpoise and cormorants were 1.9, 120, 8700 and 2,100 ng g(-1) wet weight (210, 1,300, 10,000 and 42,000 ng g(-1) lipid weight) respectively. Herring, harbour porpoise and black cormorant apparently bioaccumulate many PCBs found in their food, and the values of the bioaccumulation factors (BAFs) for PCBs were approximately 10 in herring, 35 in harbour porpoise and up to 300 in breast muscle of cormorants. Harbour porpoise clearly is able to metabolize the most toxic non-ortho PCBs (no. 77, 126 and 169) and a few mono-ortho PCBs (no. 114, 123 and 156), while all non- and mono-ortho PCBs are bioaccumulated by herring. Penta-, hexa- and hepta-CBs were the dominatant homologue classes both in the muscle tissue and liver. PCB congeners nos. 201, 209, 172/192, 194 and 195 were characterized by the largest BAFs (between 100 and 300). Principal component analysis has been used to analyse the interdependences and differences in the CB congener accumulation patterns between the components of the investigated pelagic food web.     

Development of a diffusive sampling method for determination of methyl isocyanate in air

A diffusive sampling method for determination of methyl isocyanate in air has been developed. A glass fibre filter impregnated with 1-(2-methoxyphenyl)piperazine in a commercially available diffusive sampling device was used to collect methyl isocyanate and the derivative formed was analysed with LC-MS/MS. The sampling rate was determined to be 15.6 ml min(-1), with a relative standard deviation of 7.3%. The sampler was validated for sampling periods from 15 min to 8 h, for relative humidities from 20% to 80% and for concentrations from I to 46 microg m(-3). A field validation was also made and the diffusive sampling results showed no difference compared to a pumped reference method. The impregnated filters have to be stored apart from the diffusive sampler housing and loaded into the sampler prior to each sampling.