Techno policy aspects and socio-economic impacts of eco-industrial networking in the fishery sector: experiences from An Giang Province,Vietnam

Eco-industrial networking is considered as a new approach for businesses to improve their competitiveness, economic viability and human and ecosystem health. A cyclic material flow with alternative usage of all materials in the loop is an essential feature of an eco-industrial network. While eco-industrial networking has been primarily applied on the high-tech sector, this paper attempts to apply the principles on the fishery sector of An Giang, a Vietnamese province in the Mekong River Delta. An Giang Province has its own market share in the trade of Tra and Basa fish. The industries in the value chain of Tra and Basa are in a situation that forces them to improve their competitiveness to retain the market share. It was found that forming an eco-industrial network and recruiting new businesses to utilize all materials in the process provides additional revenue apart from reducing waste disposal concerns. This paper details the current market situation, the issues faced and material flow patterns and presents a feasible eco-industrial network. The results of the study indicate that the eco-industrial network creates positive impacts in terms of increased competitiveness, improved socio-economic conditions and cleaner environment.     

A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis

This paper is concerned with the evaluation of cyclic hardening models within the stress–strain behavior of aluminum alloy AC4C-T6 that can be used to LNG cargo pump operating in cryogenic temperature. To insure the strength assessment of LNG cargo pump, material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 is investigated through FEA (Finite Element Analysis) with various hardening options including linear and non-linear hardening, isotropic and kinematic hardening, and combined hardening model. Monotonic tensile and cyclic tensile experiments for AC4C-T6 alloy were performed at room temperature and temperature of ?165 °C. Parameters of each hardening model are obtained from the experimental data; thus five hardening models are numerically simulated thereafter. Appropriate hardening models which describe the cyclic stress–strain relationship are investigated through the simulations of cyclic hardening behavior by FEA. In order to verify the predicted behavior of cyclic hardening obtained by FEA, the results of FEA and those measured by experiments are compared.     

Direct assessment of international consistency of standards for ground-level ozone: strategy and implementation toward metrological traceability network in Asia

An international exercise to directly assess consistency of standards for ground-level ozone in East Asia was conducted as part of the East Asian Regional Experiment 2005 (EAREX 2005) in the framework of the Atmospheric Brown Clouds (ABC) project. Ten organizations collaboratively participated in the intercomparison. Four groups representing Japan, Korea, Hong Kong, and Taiwan made comparisons at the Gosan super observatory, Jeju Island, Korea, in March 2005, with ozone instruments calibrated to their national standards, and four Japanese groups made off-site comparisons with laboratory-level standards. All comparisons generally indicated good agreement with the standard reference photometer (SRP) 35, built by the National Institute of Standards and Technology (USA) and maintained by the National Institute for Environmental Studies (Japan). The assessment was expanded to measurement networks contributing to the World Meteorological Organization's Global Atmospheric Watch (WMO/GAW) program as part of off-site comparisons, and excellent agreement was achieved. These efforts contribute to propagating traceability of the national metrology standards among the atmospheric science community, to ensuring comparability of the existing ozone measurements, and to establishing an integrated network of air quality monitoring in Asia.     

Tributyltin causes abnormal development in embryos of medaka, Oryzias latipes

We examined the effects of tributyltin (TBT) on embryonic development, hatching success and sexual differentiation in Japanese medaka (Oryzias latipes). Embryos (within 8h after fertilization) were exposed to TBT in ovo via nanoinjection at concentrations of 0 (control), 0.16, 0.80, 3.96, 19.2 and 82.1 ng/egg. Embryonic survival, development and hatching were observed. Hatched fry were reared until 60 days when they sexually matured, and sexual differentiation was also examined by accordance of genetic and phenotypic sex, based on existence of DMY (a male determining gene in medaka) and secondary sex characteristics. As results, TBT caused a concentration-dependent mortality and impaired the embryonic development. However, no masculinization was detected at 60 dph medaka adults. Lowest observed effective concentration for inducing abnormal embryonic development was estimated to 0.16 ng/egg (ca. 160 ng/g egg).     

A comparative study in treating two VOC mixtures in trickle bed air biofilters

Two independent parallel trickling bed air biofilters (TBABs) ("A" and "B") with two different typical VOC mixtures were investigated. Toluene, styrene, methyl ethyl ketone (MEK), and methyl isobutyl ketone (MIBK) were the target VOCs in the mixtures. Biofilter "A" was fed equal molar ratio of the VOCs and biofilter "B" was fed a mixture based on EPA 2003 emission report. Backwashing and substrate starvation operation were conducted as biomass control. Biofilter "A" and "B" maintained 99% overall removal efficiency for influent concentration up to 500 and 300 ppmv under backwashing operating condition, respectively. The starvation study indicated that it can be an effective biomass control for influent concentrations up to 250 ppmv for biofilter "A" and 300 ppmv for "B". Re-acclimation of biofilter performance was delayed with increase of influent concentration for both biofilters. Starvation operation helped the biofilter to recover at low concentrations and delayed re-acclimation at high concentrations. Furthermore, re-acclamation for biofilter "B" was delayed due to its high toluene content as compared to biofilter "A". The pseudo first-order removal rate constant decreased with increase of volumetric loading rate for both biofilters. MEK and MIBK were completely removed in the upper 3/8 media depth. While biofilter depth utilization for the removal of styrene and toluene increased with increase of influent concentrations for both biofilters. However, toluene removal utilized more biofilter depth for biofilter "B" as compared to biofilter "A".     

Transport and Adhesion of Escherichia coli JM109 in Soil Aquifer Treatment (SAT): One-Dimensional Column Study

Bacteria transport and adhesion experiments under water-saturated and partially saturated conditions were examined over a wide range of ionic strength, from 1 to 100 mM KCl, CaCl₂, and MgCl₂, and at water contents of 0.15 and 0.22 in sand columns packed with three different sands, baked, sterilized, and raw sands in order to investigate the effects of ionic strength, water content, and porous media type on the microbial adhesion in soil aquifer treatment (SAT). Well-characterized Escherichia coli JM109 were used as model bacterial cells in this study. Column study results showed that bacterial deposition rates increased with increasing ionic strength and decreasing water content, and were higher in raw sand columns than those in other sand columns. The Derjaguin–Landau–Verwey–Overbeek (DLVO) theory was applied to experimental results in order to consider the interaction energies between the bacterial cells and collector grains; results revealed that a considerable amount of bacterial cells was weakly deposited onto the solid surfaces in secondary minimum.     

Fractionation of heavy metals in runoff and discharge of a stormwater management system and its implications for treatment

A stormwater management system utilizing the mechanisms of sedimentation and filtration/infiltration was developed and constructed for the immobilization of suspended solids and heavy metal constituents （Fe, Zn, Pb, Cr, Cu, Cd, Ni） in runoff. Monitoring took place between May 2010 and November 2012 on a total of 24 storm events. This research on the fractionation of heavy metals in runoff and discharge of a stormwater system provided insight on the actual efficiency of the system and determined the implications for treatment of the particulate-bound and dissolved heavy metals in runoff. Results revealed that the partitioning of heavy metal load in runoff in either dissolved or particulate-bound were influenced by flow rate and total suspended solids load, and evident in high-intensity storm （rainfall-runoff event）. On the other hand, the partitioning of heavy metal load discharge from the stormwater system was more apparent during the early period of discharge having higher variability in dissolved than particulate-bound heavy metal. Findings revealed that fractionation of heavy metals played an important role in the performance of the stormwater system; thus, must be considered in designing stormwater systems. For the stormwater system to be effective, it is recommended to design the system treating not only the early period of a storm （first flush criteria） rather until the peak part of the hydrograph （high flow rate where partitioning was greatest） from a load basis.     

Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet

Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 （P25） in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained. Larger size fibrous nanowires resulting from the hydrotherrnal treatment showed high affinity in adsorbing crystal violet （CV）, which was mainly due to their high surface area. The photocatalytic bleaching of CV solution revealed that the wires are photoactive under ultraviolet light irradiation. Macroporous nanowires are considered as effective adsorbents of CV, capable of photocatalvtic degradation, and they can be easily separated from the solution by settling.     

An estimation of vehicle kilometer traveled and on-road emissions using the traffic volume and travel speed on road links in Incheon City

The objective of this study is to estimate the vehicle kilometer traveled (VKT) and on-road emissions using the traffic volume in urban. We estimated two VKT; one is based on registered vehicles and the other is based on traffic volumes. VKT for registered vehicles was 2.11 times greater than that of the applied traffic volumes because each VKT estimation method is different. Therefore, we had to define the inner VKT is moved VKT inner in urban to compare two values. Also, we focused on freight modes because these are discharged much air pollutant emissions. From analysis results, we found middle and large trucks registered in other regions traveled to target city in order to carry freight, target city has included many industrial and logistics areas. Freight is transferred through the harbors, large logistics centers, or via locations before being moved to the final destination. During this process, most freight is moved by middle and large trucks, and trailers rather than small trucks for freight import and export. Therefore, these trucks from other areas are inflow more than registered vehicles. Most emissions from diesel trucks had been overestimated in comparison to VKT from applied traffic volumes in target city. From these findings, VKT is essential based on traffic volume and travel speed on road links in order to estimate accurately the emissions of diesel trucks in target city. Our findings support the estimation of the effect of on-road emissions on urban air quality in Korea.     

Nontarget screening using passive air and water sampling with a level Ⅱ fugacity model to identify unregulated environmental contaminants

It is thought that there are many unregulated anthropogenic chemicals in the environment.For risk assessment of chemicals, it is essential to estimate the predicted environmental concentrations. As an effort of identifying residual organic contaminants in air and water in Korea, nontarget screening using two-dimensional gas chromatography time-of-flight mass spectrometry(GC × GC-TOFMS) was conducted at 10 sites using polyurethane foam passive air sampler and at 6 sites using polydimethyl siloxane(PDMS) passive water sampler in three different seasons in 2014. More than 600 chemical peaks were identified satisfying the identification criteria in air and water samples, respectively, providing a list for further investigation. Chemical substances with reported national emission rates in2014(n = 149) were also screened for potential existence in the environment using a level Ⅱ fugacity model. Most of chemical substances classified as not detectable were not identified with detection frequency greater than 20% by nontarget screening, indicating that a simple equilibrium model has a strong potential to be used to exclude chemicals that are not likely to remain in the environment after emissions from targeted monitoring.