Adaptive alterations in the fatty acids composition under induced oxidative stress in heavy metal-tolerant filamentous fungus Paecilomyces marquandii cultured in ascorbic acid presence

The ability of the heavy metal-tolerant fungus Paecilomyces marquandii to modulate whole cells fatty acid composition and saturation in response to IC₅₀ of Cd, Pb, Zn, Ni, and Cu was studied. Cadmium and nickel caused the most significant growth reduction. In the mycelia cultured with all tested metals, with the exception of nickel, a rise in the fatty acid unsaturation was noted. The fungus exposure to Pb, Cu, and Ni led to significantly higher lipid peroxidation. P. marquandii incubated in the presence of the tested metals responded with an increase in the level of linoleic acid and escalation of electrolyte leakage. The highest efflux of electrolytes was caused by lead. In these conditions, the fungus was able to bind up to 100 mg?g^?1 of lead, whereas the content of the other metals in the mycelium was significantly lower and reached from 3.18 mg?g^?1 (Cu) to 15.21 mg?g^?1 (Zn). Additionally, it was shown that ascorbic acid at the concentration of 1 mM protected fungal growth and prevented the changes in the fatty acid composition and saturation but did not alleviate lipid peroxidation or affect the increased permeability of membranes after lead exposure. Pro-oxidant properties of ascorbic acid in the copper-stressed cells manifested strong growth inhibition and enhanced metal accumulation as a result of membrane damage. Toxic metals action caused cellular modulations, which might contributed to P. marquandii tolerance to the studied metals. Moreover, these changes can enhance metal removal from contaminated environment.     

Assessment of aluminum bioavailability in alum sludge for agricultural utilization

Inorganic aluminum ions, [Al(H₂O)₆]³⁺, [Al(OH)(H₂O)₅]²⁺, and [Al(OH)₂(H₂O)₄]⁺, are toxic to a number of crops. The aim of this study was to estimate the danger of soil contamination of bioavailable aluminum and heavy metals forms because of alum sludge which was a by-product of water, and wastewater treatment technology using aluminum coagulant is introduced into the soil. Aluminum and selected heavy metal fractionation was carried out in the post-coagulation sludge collected at a water treatment plant (where aluminum was used as a coagulant), fermented sewage sludge at a municipal wastewater treatment plant (which did not apply aluminum coagulant), and soil from water treatment plant as well as the mixtures of sludge and soil. It has been found that post-coagulation sludge used as natural fertilizer is a secondary source of bioavailable aluminum, especially when aluminum coagulants are used during water and wastewater treatment. The evaluation of applicability of the sludge to very weak acidic and acidic agricultural soils was carried out. The authors shall debate the question whether, in this case, the Regulation of EU and Polish Government on sewage sludge should also take the bioavailable aluminum into account and add to the list of the elements whose allowable contents are limited.     

Content and bioconcentration factors of mercury by Parasol Mushroom Macrolepiota procera

The carpophores of Parasol Mushroom and underlying soil substrate collected from several unpolluted and spatially distant sites across Poland were examined to know content and bioconcentration potential of mercury by this species. The total mercury content of the caps of Parasol Mushroom for the particular sites ranged from 1.1 +/- 1.0 to 8.4 +/- 7.4 microg/g dry matter (total range from 0.05 to 22 microg/g dm), while in the stalks were from 0.53 +/- 0.27 to 6.8 +/- 7.1 microg/g dm (total range from 0.078 to 20 microg/g dm). A top soil layer (0-10 cm) showed baseline mercury concentration from 0.022 +/- 0.011 to 0.36 +/- 0.16 microg/g dm (total range from 0.010 to 0.54 microg/g dm). Parasol Mushroom is an effective mercury accumulator in the carpophores and bioconcentration factor (BCF) values of this element in the caps and depending on the sampling site ranged from 16 +/- 6 to 220 +/- 110 (total range from 0.52 to 470), while for the stalks were from 7.6 +/- 2.6 to 130 +/- 96 (total range from 0.52 to 340). It seems reasonable to state that tolerance (maximum allowable concentration) of the total mercury in a single cap of Parasol Mushroom at unpolluted areas should not exceed 25 microg/g dm. A value greater then 25 mu g/g dm will imply an elevated content due to site pollution problems. Nevertheless, knowledge on highly toxic methylmercury content and its fraction in the total mercury content of Parasol Mushroom is lacking.     

Optimisation of pressurised liquid extraction for elimination of sulphur interferences during determination of organotin compounds in sulphur-rich sediments by gas chromatography with flame photometric detection

A simple method for species-selective analysis of organotin compounds (OTCs) (butyl and phenyl) in sediments was developed. The sample preparation procedure was specifically optimised for sulphur-rich sediments to eliminate interferences from elemental sulphur and organosulphur compounds. Tin species were extracted from sediment samples using pressurised liquid extraction technique (PLE), ethylated - with simultaneous extraction to isooctane - in aqueous phase with sodium tetraethylborate (NaBEt(4)) and separated/detected by gas chromatography with flame photometric detection (GC-FPD). PLE operational variables (extraction temperature and pressure, solvent composition and number of static extraction steps) and extract handling routine were fine-tuned to minimise the amount of extracted interferents while keeping OTCs recovery at an acceptable level. Best results were obtained after extraction of sediment samples with methanol/water (75% v/v methanol) solution of acetic acid/sodium acetate with tropolone addition (0.6 g l(-1)). Derivatisation of low temperature, high-pressure (50 degrees C, 13.8 MPa) extracts gives isooctane extracts which are clean enough to be directly analysed by GC-FPD without any further cleanup. Interferences from elemental sulphur were completely eliminated while concentrations of other interferents were reduced to the level not impairing quantitation of OTCs under the study. No negative effects in terms of chromatographic column deterioration were observed after repeated injections of such extracts. Two certified reference materials, BCR646 and PACS-2, were analysed to assess performance of the method. Recoveries of all OTCs under the study, except MBT, were in the range of 91-114%. MBT extraction efficiency was low (34-47%) therefore the method is unsuitable for precise determinations of this compound.     

An application of the Pareto method in surveys to diagnose managers’ and workers’ perception of occupational safety and health on selected Polish construction sites

The construction industry is an important sector of the economy in Poland. According to the National Labour Inspectorate (PIP) data of 2014, the number of victims of fatal accidents in the construction sector amounted to 80 as compared with 187 injured in all other sectors of economy in Poland. This article presents the results of surveys on the impact of construction worker behaviour on the occupational safety and health outcomes. The surveys took into account the point of view of both construction site management (tactical level) and construction workers (operational level). For the analysis of results, the method of numerical taxonomy and Pareto charts was employed, which allowed the authors to identify the areas of occupational safety and health at both an operational and a tactical level, in which improvement actions needed to be proposed for workers employed in micro, small, medium and large construction enterprises.     

Release of substituents from phenolic compounds during oxidative coupling reactions

Phenolic compounds originating from plant residue decomposition or microbial metabolism form humic-like polymers during oxidative coupling reactions mediated by various phenoloxidases or metal oxides. Xenobiotic phenols participating in these reactions undergo either polymerization or binding to soil organic matter. Another effect of oxidative coupling is dehalogenation, decarboxylation or demethoxylation of the substrates. To investigate these phenomena, several naturally occurring and xenobiotic phenols were incubated with various phenoloxidases (peroxidase, laccase, tyrosinase) or with birnessite (delta-MnO(2)), and monitored for chloride release, CO(2) evolution, and methanol or methane production. The release of chloride ions during polymerization and binding ranged between 0.2% and 41.4%. Using the test compounds labeled with 14C in three different locations (carboxyl group, aromatic ring, or aliphatic chain), it was demonstrated that 14CO(2) evolution was mainly associated with the release of carboxyl groups (17.8-54.8% of the initial radioactivity). Little mineralization of 14C-labeled aromatic rings or aliphatic carbons occurred in catechol, ferulic or p-coumaric acids (0.1-0.7%). Demethoxylation ranged from 0.5% to 13.9% for 2,6-dimethoxyphenol and syringic acid, respectively. Methylphenols showed no demethylation. In conclusion, dehalogenation, decarboxylation and demethoxylation of phenolic substrates appear to be controlled by a common mechanism, in which various substituents are released if they are attached to carbon atoms involved in coupling. Electron-withdrawing substituents, such as -COOH and -Cl, are more susceptible to release than electron-donating ones, such as -OCH(3) and -CH(3). The release of organic substituents during polymerization and binding of phenols may add to CO(2) production in soil.     

Metals in edible fish from Vistula River and Dead Vistula River channel,Baltic Sea

Metals including Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were determined in muscle tissue of 12 fish species by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and cold vapour-atomic absorption spectroscopy (CV-AAS). Fish were collected from Vistula River at lower course and Dead Vistula River channel in south of Baltic Sea in Poland. The fish species examined include Round Goby (Neogobius melanostomus), Crucian Carp (Carassius carassius), Bull-rout (Myoxocephalus scorpius), Tench (Tinca tinca), Bream (Abramis brama), Burbot (Lota lot), Perch (Perca perca), Roach (Rutilus rutilus), Silver Carp (Hypophthalmichthys molitrix), Pikeperch (Stizostediun lucioperca), Brown salmon (Salmo trutta m. Trutta) and Eel (Anguilla anguilla). The median values of metal concentrations in fresh muscle tissue of 11 fish species varied as follows: Al < 0.5–60; Ba < 0.05–0.31; Ca 120–1800; Cd < 0.05–0.096; Co < 0.10; Cr < 0.10–0.50; Cu < 0.15–0.77; Fe 1.5–21; Hg 0.0058–0.65; K 1800–4200; Mg 130–560; Mn 0.12–0.59; Na 350–840; Ni < 0.2–0.31; Pb < 0.75; Sr 0.079–2.9; Zn 3.3–23 μg/g fresh weight. The Target Hazard Quotient (THQ) values calculated in this study for Cd and Hg from muscles of fish species collected from Vistula River were low in the range of 0.4 for Hg and 0.8 for Cd. Supplemental materials are available for this article. Go to the publisher's online edition of Journal of Environmental Science and Health, Part B to view the free supplemental file.     

Content and bioconcentration factors of mercury by Parasol Mushroom Macrolepiota procera

The carpophores of Parasol Mushroom and underlying soil substrate collected from several unpolluted and spatially distant sites across Poland were examined to know content and bioconcentration potential of mercury by this species. The total mercury content of the caps of Parasol Mushroom for the particular sites ranged from 1.1 ± 1.0 to 8.4 ± 7.4 μ g/g dry matter (total range from 0.05 to 22 μ g/g dm), while in the stalks were from 0.53 ± 0.27 to 6.8 ± 7.1 μ g/g dm (total range from 0.078 to 20 μ g/g dm). A top soil layer (0–10 cm) showed baseline mercury concentration from 0.022 ± 0.011 to 0.36 ± 0.16 μ g/g dm (total range from 0.010 to 0.54 μg/g dm). Parasol Mushroom is an effective mercury accumulator in the carpophores and bioconcentration factor (BCF) values of this element in the caps and depending on the sampling site ranged from 16 ± 6 to 220 ± 110 (total range from 0.52 to 470), while for the stalks were from 7.6 ± 2.6 to 130 ± 96 (total range from 0.52 to 340). It seems reasonable to state that tolerance (maximum allowable concentration) of the total mercury in a single cap of Parasol Mushroom at unpolluted areas should not exceed 25 μ g/g dm. A value greater then 25 μ g/g dm will imply an elevated content due to site pollution problems. Nevertheless, knowledge on highly toxic methylmercury content and its fraction in the total mercury content of Parasol Mushroom is lacking.     

Use of additives to enhance the removal of phenols from water treated with horseradish and hydrogen peroxide

Use of additives, such as polyethylene glycol (PEG), selected surfactants, chitosan gel, or activated carbon, has been shown to enhance enzymatic treatment of water polluted with organic compounds. In this study, additives were used to facilitate the removal of 2,4-dichlorophenol (2,4-DCP) from water using minced horseradish (Armoracia rusticana P. Gaertn. et al.) as a carrier of peroxidase activity. The specific objectives of the study were to (i) enhance the pollutant removal activity of minced horseradish by the addition of PEG and other additives (e.g., Tween 20, Triton X-100, and rhamnolipid); (ii) eliminate colored reaction products by the addition of chitosan; and (iii) eliminate color by amending treated water with activated carbon. The disappearance of 2,4-DCP in horseradish-treated water samples amended with PEG or various surfactants (75-90%) was greatly increased over that observed in nonamended samples (29%). The effect of PEG depended on its average molecular weight. As indicated by visible spectrophotometry, enclosing horseradish pieces between two sealed chitosan films completely eliminated colored reaction products; however, the decolorization was accompanied by a reduction in 2,4-DCP removal (from 95 to 60%). On the other hand, commercially available activated carbon completely removed colored reaction products from the treated water without reducing the removal efficiency. Based on the results obtained, it can be concluded that the use of additives may considerably improve the quality of wastewater treated by plant materials.