Nanoencapsulation of hexavalent chromium with nanoscale zero-valent iron: High resolution chemical mapping of the passivation layer

Solid phase reactions of Cr(Ⅵ) with Fe(0) were investigated with spherical-aberration-corrected scanning transmission electron microscopy(Cs-STEM) integrated with X-ray energy-dispersive spectroscopy(XEDS). Near-atomic resolution elemental mappings of Cr(Ⅵ)–Fe(0) reactions were acquired. Experimental results show that rate and extent of Cr(Ⅵ) encapsulation are strongly dependent on the initial concentration of Cr(Ⅵ) in solution. Low Cr loading in nZⅥ(1.0 wt%) promotes the electrochemical oxidation and continuous corrosion of n ZⅥ while high Cr loading(1.0 wt%) can quickly shut down the Cr uptake. With the progress of iron oxidation and dissolution, elements of Cr and O counter-diffuse into the nanoparticles and accumulate in the core region at low levels of Cr(Ⅵ)(e.g., 10 mg/L). Whereas the reacted n ZⅥ is quickly coated with a newly-formed layer of 2–4 nm in the presence of concentrated Cr(Ⅵ)(e.g., 100 mg/L). The passivation structure is stable over a wide range of pH unless pH is low enough to dissolve the passivation layer. X-ray photoelectron spectroscopy(XPS) depth profiling reconfirms that the composition of the newly-formed surface layer consists of Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxides with Cr(Ⅵ) adsorbed on the outside surface. The insoluble and insulating Fe(Ⅲ)–Cr(Ⅲ)(oxy)hydroxide layer can completely cover the n ZⅥ surface above the critical Cr loading and shield the electron transfer. Thus, the fast passivation of nZⅥ in high Cr(Ⅵ) solution is detrimental to the performance of nZⅥ for Cr(Ⅵ) treatment and remediation.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

电絮凝净化含聚污水影响因素研究

目的为保障油田正常安全生产,促进油田含聚污水的循环利用。方法采用电絮凝技术单因素研究方法开展净化含聚污水的静态实验研究,探讨外加电流密度、极板间距、初始pH及聚合物浓度等因素对净化效果的影响规律。结果当初始pH为7.0,电流密度为4.0 m A/m2,极板间距为1.0 cm,电解16 min时,综合处理效果最佳。此时,含油量与浊度去除率分别为98.85%,99.93%,处理每克油平均消耗为0.0494 g的Al,处理每立方米含聚污水的能耗为0.2895 k Wh。污水中的聚合物浓度越小,净化效果越好。结论中性处理,极板间距为1.0 cm,外加电流密度为4.0 m A/m2,通电16 min是最佳处理条件。     

交通拥堵环境下的隔声、降噪措施改进与研究

噪声污染有局部性特点,现阶段城市内噪声污染的根源主要集中于汽车噪音,在交通拥堵的环境下,对声音进行隔断降噪十分必要。不同环境下的噪声评价方法各有不同,但归根结底,任何噪声污染事件由噪声源、传声途径和接收者三个主要部分组成。在交通拥堵环境下对噪声源和传声途径两个角度对声音进行降噪是当前隔声降噪的主措施。因此,提出对车辆的组装结构和行车路线进行改进、在汽车制造过程中采用具有良好隔声、吸声效果的材料进行降噪。并结合实例进行调查分析,针对日趋严重的城市交通拥堵导致的噪声污染问题,对噪声进行了预测分析,并针对实际情况提出一种新的隔声屏障降噪模式并进行仿真实验分析。     

小流域综合治理新设计研究——猪沼果模式

近年来,小流域综合治理的主旨思想改变了,其工作重心在于巩固和发展治理开发的成果,提升综合治理的科技含量,增加治理带来的经济效益。于是将小流域的治理与生产联系起来成为了当前科研人员的研究方向。文章对目前部分地区大力推广的"猪-沼-果"模式在小流域治理方面的概念、发展及综合效益等方面做了一些综述。总的来说,猪沼果模式能够增加农村的能源,增加农民收入,并保护绿植,促进小流域治理。     

呼兰河哈尔滨段水环境质量现状及污染源解析

为了解呼兰河哈尔滨段水环境质量现状及污染物来源,在平水期和枯水期,对呼兰河哈尔滨段沿线进行现场勘查及断面水质监测。结果表明,呼兰河哈尔滨段沿岸集中式排污点源、工业点源、农村生活污染、畜禽粪便、农田径流等各类污染源化学需氧量总入河量为7 671.02吨/年,氨氮总入河量为1 195.16吨/年。松北区的主要污染贡献源为肇兰新河支流污染;呼兰区的主要污染贡献源为集中式排污点源和农业面源污染。     

好氧颗粒污泥对有机物吸附类型的研究

为探索好氧颗粒污泥对有机物的去除机制,进行好氧颗粒污泥对有机物的吸附性能及吸附类型研究,在实验室条件下,采用动态吸附方式,利用SBAR反应器分析好氧颗粒污泥对有机物的去除情况。结果表明,好氧颗粒污泥存在初期吸附作用,最佳吸附时间为30~45 min,COD去处率60%;通过对失活前后好氧颗粒污泥对有机物吸附性能测定以及红外光谱分析,探究好氧颗粒污泥对有机物的吸附类型,表明好氧颗粒污泥对有机物的吸附是一个包含生物吸附和化学吸附的复杂过程。     

基于医疗大数据的空气污染类疾病信息分析研究

世界卫生组织表示,空气污染为造成全球疾病负担的一项重要因素,能够导致心血管疾病、呼吸系统疾病等各种疾病的发生,空气污染问题已经成为公共卫生领域关注的重点问题,对基于医疗大数据的空气污染类疾病信息进行分析。利用半参数广义相加的泊松回归模型,在控制时间、长期趋势、气象因素等一些复杂条件的基础上,对2012年1月1日至2016年12月31日,某市空气中SO2、PM10和NO2等一些主要空气污染物的监测浓度值与呼吸系统疾病(肺炎以及支气管炎与哮喘)住院人数的相关性进行研究,研究结果表明,空气颗粒物PM10对患病率的影响相对于气态污染物SO2、NO2更为严重。     

盐酸萘乙二胺比色法测定大气中硝基苯、苯胺浓度的改进

本文探讨了盐酸萘乙二胺比色方法测定大气中硝基苯、苯胺浓度的最佳反应条件,如酸度、试剂加入量、反应温度、反应时间等。简化了过滤、洗涤操作,精密度高、显色稳定。     

高密度电法在原位修复土壤过程中的监控研究

采用高密度电阻率成像法（ERT）对上海市某有机污染场地土壤污染原地修复进行研究，通过持续监测药剂注入前后电阻率的改变来推断药剂和污染物的扩散路径。结果表明，药剂扩散的影响半径介于2 m～4 m之间；其影响深度根据注药点和土壤渗透性差异而有所不同，在16 m处注药的影响深度大于监测深度20 m，ERT技术在监控原位注入修复过程中具有较好的可行性和适用性。