Shape memory polymer snap-fits for active disassembly

This paper explores a means to simplify disassembly by engineering a snap-fit that automatically releases upon exposure to a heat field thus limiting manual labor or machine operation for disassembly. Shape memory polymer (SMP) snap-fits were designed and manufactured to actively release upon a thermal trigger. Snap-fits were designed with an added feature known here as a release angle that would allow for an uninterrupted movement for disassembly in the presence of an elevated temperature. SMP snap-fits were then manufactured and tested. Testing was performed for demonstration of the active release of the SMP snap-fits and for analysis of active disassembly (AD) process parameters. Taguchi methods were used to analyze the AD process parameters, including heating method and disassembly temperature. The results from this research show the successful demonstration of the SMP snap-fits within a manufactured product housing. AD process parameter analysis shows that both the heating method and temperature affect the AD process. The analysis determines that by increasing the heat exchange rate the snap-fit disassembly time is shortened. From the performed experiments, it was seen that an Oil bath at 150 °C produced the best results in regards to disassembly time and signal-noise ratio. The results from experimentation demonstrate the possibility of acceptable heat-releasable fasteners for more efficient disassembly and exhibit benefits over current AD elements comprised of shape memory alloys.     

人与居室环境

本文通过对居室环境概念的阐述,剖析了人与居室环境功能的关系,并指出了居室环境对人行为的规范作用及营造良好居室环境的重要性。     

Description and evaluation of a model of deposition velocities for routine estimates of dry deposition over North America. Part II: review of past measurements and model results

Numerical sensitivity tests and four months of complete model runs have been conducted for the Routine Deposition Model (RDM). The influence of individual model inputs on dry deposition velocity as a function of land-use category (LUC) and pollutant (SO₂, O₃, SO²⁻₄ and HNO₃) were examined over a realistic range of values for solar radiation, stability and wind speed. Spatial and temporal variations in RDM deposition velocity (V_d) during June – September 1996 time period generated using meteorological input from a mesoscale model run at 35 km resolution over north-eastern North America were also examined. Comparison of RDM V_d values to a variety of measurements of dry deposition velocities of SO₂, O₃, SO²⁻₄ and NHO₃ that have been reported in the literature demonstrated that RDM produces realistic results. Over northeastern NA RDM monthly averaged dry deposition velocities for SO₂ vary from 0.2 to 3.0 cm s⁻¹ with the highest deposition velocities over water surfaces. For O₃, the monthly averaged dry deposition velocities are from 0.05 to 1.0 cm s⁻¹ with the lowest values over water surfaces and the highest over forested areas. For HNO₃, the monthly averaged dry deposition velocities have the range of 0.5 to 6 cm s⁻¹, with the highest values for forested areas. For SO²⁻₄, they range from 0.05–1.5 cm s⁻¹, with the lowest values over water and the highest over forest. The monthly averaged dry deposition velocities for SO₂ and O₃ are higher in the growing season compared to the fall, but this behaviour is not apparent for HNO₃ and sulphate. In the daytime, the hourly averaged dry deposition velocities for SO₂, O₃, SO²⁻₄ and HNO₃ are higher than that in the nighttime over most of the vegetated area. The diurnal variation is most evident for surfaces with large values for leaf area index (LAI), such as forests. Based on the results presented in this paper, it is concluded that RDM V_d values can be combined with measured air concentrations over hourly, daily or weekly periods to determine dry deposition amounts and with wet deposition measurements to provide seasonal estimates of total deposition and estimates of the relative importance of dry deposition.     

职业安全卫生标准体系建设初探

职业安全卫生标准体系是企业安全科研生产工作的基础 ,是推广试行职业安全卫生管理体系 (OHSMS)的有效技术支撑条件。笔者通过分析职业安全卫生标准应用的实际 ,探索性地提出建立适应企业职业安全卫生管理、研究以及 OHSMS需要的标准化管理体系 ;论述并研讨该体系建立的思路、原则和查询方法以及应用过程的管理 ;以此为职业安全卫生管理、研究和试行OHSMS奠定基础并提供有益的帮助。     

生石灰孔结构对高温脱硫性能的影响

喷钙脱硫工艺的炉内脱硫率 ,不仅受工艺参数的影响 ,还与石灰石分解生成的新生CaO或直接喷入的CaO的表面结构有关。本研究用同一石灰石经不同方法 (煅烧、过烧、煅烧 -水合 -脱水等 )制备了四种具有不同比表面积和孔结构的生石灰。高温脱硫研究表明 :这四种不同孔结构的生石灰 ,具有不同的脱硫率。通过对高温脱硫前后吸着剂宏观结构变化的对比 ,发现半径小于 30 的孔易被反应产物堵塞 ,因而脱硫能力有限 ,而半径大于 5 0 的孔对脱硫更有效。本研究将为提高炉内喷钙的脱硫率、研制和开发高效脱硫剂提供新的途径。     

Reconstructed cropland in the mid-eleventh century in the traditional agricultural area of China: implications of comparisons among datasets

Reconstructions of historical cropland area and spatial distribution are necessary for studying human effects on the environment due to agricultural development. To understand the current status of reconstructions of cropland area and its spatial distribution in the mid-eleventh century in the traditional agricultural area of China, we compared three available datasets: the historic cropland inventories-based HE dataset, the population-based History Database of the Global Environment (HYDE) dataset, and the PJ dataset. The results indicate that the HYDE and PJ datasets estimated the regional mean cropland area fraction (a ratio of cropland area to total land area, hereafter, CAF) for the study area to be 0.12 and 0.09, respectively, both of which were lower than the HE estimation of 0.18. Moreover, both the HYDE and PJ datasets have a poor ability to capture the spatial distribution of the historical CAF. The HYDE dataset overestimated the cropland area in North China and underestimated the cropland area in the Yangtze River reach. The HYDE dataset also overestimated the cropland area along the great rivers in North China. The PJ dataset underestimated the cropland area in the old agricultural area and overestimated the cropland area in the relatively new agricultural area. These incorrect spatial distributions from the HYDE and PJ datasets mainly resulted from the underestimation of the historical population and an incorrect approach for the spatial allocation of cropland within China. The incorrect approach was mainly derived from a poor understanding of the historic spatial distribution of cropland. Using the expert knowledge of local historians may be an effective method to reduce the uncertainties in the global historic cropland reconstruction.     

三标整合的HSE管理体系实施要点

介绍了职业健康安全管理体系、环境管理体系、中国石化HSE管理体系三标整合管理体系实施要点.