)]发光细菌法在水质综合毒性在线检测中的应用

以海洋发光细菌费氏弧菌(Vibrio fischeri)作为检测生物,采用冻干菌粉快速复苏技术,研究费氏弧菌在水质检测中的最佳测试温度和有效性测试条件,并对硫酸锌等多种毒物和几种实际水样进行发光抑制作用分析。研究表明,费氏弧菌冻干粉复苏菌液保存在2~5℃条件下能有效测试7 d,最佳测试温度为15℃,最佳测试时间为15 min。氯化汞、硫酸锌、硫酸镉等重金属和苯胺、多菌灵、甲醛等有机毒物对费氏弧菌均具有较强的光抑制作用,也即费氏弧菌对以上毒物较为敏感,并能够连续7 d保持对同一浓度硫酸锌的敏感性较为一致。对几种实际水样的测试和分析表明,以费氏弧菌为指示生物的发光细菌法能够应用于水质环境安全的综合毒性在线监测预警中。     

Inkjet Printing for Silicon Solar Cells

Inkjet printing of metal nanoparticles is an attractive method for front-side metallization of silicon solar cells. It is owing to noncontact, low-cost, low-waste, and simple process. In this work, we proposed the ink-jet printing and electroless technology to fabricate the seed layer and electrode layer, respectively. Furthermore, we used electroplating method to increase the electrode conductivity. In this way, the energy conversion efficiency up to 12.22% without AR coating can be obtained on 100?×?100 mm c-Si cell.     

Bioaccumulation, maternal transfer and elimination of polybrominated diphenyl ethers in wild frogs

To investigate bioaccumulation, maternal transfer and elimination of polybrominated diphenyl ethers (PBDEs) in amphibians, we collected adult frogs (Rana limnocharis) from a rice field in an e-waste recycling site in China. We found that ∑PBDEs in the whole frogs and various tissues (brain, liver, testis and egg) ranged from 17.10 to 141.11 ng g⁻¹ wet weight. Various tissues exhibited a similar PBDE congener profile, which was characterized by intermediate brominated congeners (BDE-99 and BDE-153) as the largest contributors, with less lower brominated congeners (BDE-28 and BDE-47) and higher brominated congeners (BDE-209). The maternal transfer capacity of PBDEs declined with the increase in bromine numbers of PBDE congeners. We suggest that the bromine atom number (the molecular size, to some degree) might be a determining factor for the maternal transport of a PBDE congener rather than K_ow (Octanol-Water partition coefficient), which expresses a compound’s lipophilicity. ∑PBDEs concentrations in frogs decreased over time during a depuration period of 54 days when these wild frogs were brought to the lab from the e-waste recycling site. The half-life of ∑PBDEs was 35 days, with about 14 days for BDE-47, and 36 and 81 days for BDE-99 and BDE-153, respectively. The data shows that the elimination of PBDEs has no essential difference from aquatic and terrestrial species.     

Atmospheric emission of polychlorinated biphenyls from multiple industrial thermal processes

In this study, field measurements were conducted to estimate and characterize the atmospheric emission levels and profiles of polychlorinated biphenyls (PCBs) from multiple industrial thermal processes. The emission levels and profiles of PCBs from five types of thermal processes at twenty-three plants were studied and compared with eight processes reported in our previous studies. Correlation analysis was preformed to identify a marker congener for emission of ΣPCB. A significant correlation was observed between congener CB-118 and ΣPCB (R² = 0.65 and p < 0.01), which suggests that CB-118 is a good marker congener for emission of ΣPCB. The profiles of PCBs emitted from the thirteen thermal processes were compared, and this information could be used for studying source–receptor relationships and identifying the specific sources of PCBs. To prioritize the sources for control, the concentrations of PCBs from thirteen industrial thermal sources were compared. The PCB concentrations from secondary zinc smelting and thermal wire reclamation were about one to three order magnitude higher than those of other sources, which suggests that these two sources be given priority in PCB source control. Finally, the atmospheric emission factors of PCBs from the thirteen industrial sources were summarized, and these data will be useful for developing an integrated emission inventory of PCBs.     

Surface water quality and its control in a river with intensive human impacts–a case study of the Xiangjiang River,China

Surface water quality and its natural and anthropogenic controls in the Xiangjiang River were investigated using multivariate statistical approaches and a comprehensive observation dataset collected from 2004 to 2008. Cluster analysis (CA) grouped the 15 different sampling stations into five clusters with similar hydrochemistry characteristics and pollution levels. Four principal components (PCs), nutrients, heavy metals, natural components, and organic components, were extracted from the entire dataset. Comparison of the different regional characteristics of these four PCs revealed a decreasing trend for heavy metals and an increasing trend for organic factor on an annual scale, and the seasonal trend was only observed for natural factor. We also conducted analysis of variance (ANOVA) in combination with principal component analysis (PCA) to quantify the relative contribution of spatial and temporal variations to each of the four PCs. The results revealed that 62% of the contributions from the spatial sites were responsible for variations in heavy metals, while 83% of the contributions from the sampling time were responsible for natural variations observed. However, no significant spatial or temporal contributions were found to be responsible for the nutrient and organic variations. Finally, some suggestions regarding water management were put forward based on the current status and future trends of surface water quality in the Xiangjiang River.     

Analysis of the combustion of sewage sludge-derived fuel by a thermogravimetric method in China

The treatment and disposal of sewage sludge are significant environmental problems in China. The reuse of sewage sludge for fuel could be an effective solution. The aim of this study was to characterize the behavior of sludge-derived fuel during combustion by a thermogravimetric method. The combustion profiles obtained showed four obvious weight loss regions. The results of dynamics analysis showed that first-order reactions together with Arrhenius’ law explained reasonably well the different stages of weight loss in the samples. Three temperature regions (162–327 °C, 367–445 °C, and 559–653 °C for sawdust and 162–286 °C, 343–532 °C, and 609–653 °C for coal) in each derivative thermogravimetry (DTG) curve corresponded well with the Arrhenius equation. The reactivity of sludge was lower than that of samples containing sawdust, but higher than that of coal-containing samples. These data demonstrate that sludge-derived fuel has better combustion characteristics than sludge, sawdust, or coal.     

CO还原脱硝反应锌铜双金属有机骨架催化剂的制备

采用离子交换法制备锌铜双金属有机骨架(Zna/HKUST-1,a=1/24,1/12,1/6,1/3,a为Zn与Cu的摩尔比),用于催化CO还原脱硝反应。采用XRD,SEM,FTIR,H2-TPR,BET等方法对Zna/HKUST-1进行了表征。表征结果表明:Zna/HKUST-1中有明显的Zn—O键和铜基金属有机骨架(HKUST-1)的结构,证明Zn成功进入了HKUST-1中;但随a的不同,Zna/HKUST-1的形貌、大小及比表面积出现了差异。实验结果表明,Zna/HKUST-1(a=1/24)对CO还原脱硝反应的催化活性最高,可在230℃达到NO转化率100%。     

Dynamics of mercury fluxes and their controlling factors in large Hg-polluted floodplain areas

Environmental pollution by mercury (Hg) is a considerable environmental problem world-wide. Due to the occurrence of Hg volatilization from their soils, floodplains can function as an important source of volatile Hg. Soil temperature and soil water content related to flood dynamics are considered as important factors affecting seasonal dynamics of total gaseous mercury (TGM) fluxes. We quantified seasonal variations of TGM fluxes and conducted a laboratory microcosm experiment to assess the effect of temperature and moisture on TGM fluxes in heavily polluted floodplain soils. Observed TGM emissions ranged from 10 to 850 ng m⁻² h⁻¹ and extremely exceeded the emissions of non-polluted sites. TGM emissions increased exponentially with raised air and soil temperatures in both field (R²: 0.49-0.70) and laboratory (R²: 0.99) experiments. Wet soil material showed higher TGM fluxes, whereas the role of soil water content was affected by sampling time during the microcosm experiments.     

Development of a standard reference material containing 22 chlorinated hydrocarbon gases at 1 μmol/mol in nitrogen

A gas standard mixture containing 22 chlorinated hydrocarbons in high purity nitrogen was prepared using a two-step weighing method and a gasifying apparatus developed in-house. The concentration of each component was determined using a gas chromatograph with flame ionization detection (GC/FID). Linear regression analysis of every component was performed using the gas standard mixture with concentrations ranging from 1 to 10 μmol/mol, showing the complete gasification of volatile organic compound (VOCs) species in a selected cylinder. Repeatability was also examined to ensure the reliability of the preparation method. In addition, no significant difference was observed between domestic treated and imported treated cylinders, which were conducive to reduction of the cost of raw materials. Moreover, the results of stability testing at different pressures and long-term stability tests indicated that the gas standard at 1 μmol/mol level with relative expanded uncertainties of 5% was stable above 2 MPa for a minimum of 12 months. Finally, a quantity comparison was conducted between the gas standard and a commercial gas standard from Scott Specialty Gases (now Air Liquide America Specialty Gases). The excellent agreement of every species suggested the favorable accuracy of our gas standard. Therefore, this reference material can be applied to routine observation of VOCs and for other purposes.     

Air pollutants in rural homes in Guizhou,China – Concentrations,speciation, and size distribution

Several types of fuels, including coal, fuel wood, and biogas, are commonly used for cooking and heating in Chinese rural households, resulting in indoor air pollution and causing severe health impacts. In this paper, we report a study monitoring multiple pollutants including PM₁₀, PM_2.5, CO, CO₂, and volatile organic compounds (VOCs) from fuel combustion at households in Guizhou province of China. The results showed that most pollutants exhibited large variability for different type of fuels except for CO₂. Among these fuels, wood combustion caused the most serious indoor air pollution, with the highest concentrations of particulate matters (218～417 μg m^?3 for PM₁₀ and 201～304 μg m^?3 for PM_2.5), and higher concentrations of CO (10.8 ± 0.8 mg m^?3) and TVOC (about 466.7 ± 337.9 μg m^?3). Coal combustion also resulted in higher concentrations of particulate matters (220～250 μg m^?3 for PM₁₀ and 170～200 μg m^?3 for PM_2.5), but different levels for CO (respectively 14.5 ± 3.7 mg m^?3 for combustion in brick stove and 5.5 ± 0.7 mg m^?3 for combustion in metal stove) and TVOC (170 mg m^?3 for combustion in brick stove and 700 mg m^?3 for combustion in metal stove). Biogas was the cleanest fuel, which brought about the similar levels of various pollutants with the indoor case of non-combustion, and worth being promoted in more areas. Analysis of the chemical profiles of PM_2.5 indicated that OC and EC were dominant components for all fuels, with the proportions of 30～48%. A high fraction of SO₄^2? (31～34%) was detected for coal combustion. The cumulative percentages of these chemical species were within the range of 0.7～1.3, which was acceptable for the assessment of mass balance.