Fate and degradation of the chemical warfare agent soman on sands

Soman is one of the most toxic nerve agents of the known chemical warfare agents. There is actually few knowledge on the behavior of soman in the event of an environmental contamination. It is in particular unknown whether soman remains on a given surface, evaporates into air, or degrades. Here, we studied the evaporation of soman deposited on silica sand using a laboratory-sized wind tunnel, thermal desorption, and gas chromatography. We also investigated the degradation of soman on silica sand by ³¹phosphorus solid state magic angle spinning nuclear magnetic resonance and gas chromatography–mass spectrometry. Results show that a drop of soman on silica sand spreads laterally while evaporating. The maximum vapor concentration was found when the spreading of the soman drop was maximum on the surface. Simultaneously, soman was absorbed gradually into the pore of sand and degraded to O-pinacolyl-methylphosphonic acid following a pseudo-first-order rate reaction over weeks. To our best knowledge, this is the first report on the fate of soman in a sandy environment.     

Treatment of dye‐containing wastewater by sequencing batch reactor with powdered activated carbon addition

The process involving the combination of powdered activated carbon (PAC) and biomass in the aeration basin of conventional continuous‐flow activated sludge system, known as the PACT process, has proven to be effective for treating toxic pollutants present in industrial wastewaters. In view of the many advantages of sequencing batch reactors (SBR) operationally, the objective of this study is to evaluate the PACT process under SBR operation to treat wastewater containing Acid Blue 25 (AR) and Basic Yellow 2 dyes (BR). The SBR systems were operated with FILL, REACT, SETTLE and DRAW periods in the ratio of 0.25:3.75: 1.0:1.0 for a cycle time of 6 h. The average COD and AR removal efficiencies were 89% and 93%, respectively with PAC addition compared to 76% and 7%, respectively, without PAC addition. In the case of BR, the average removal efficiencies of COD and dye increased from 52% and 9% to 90% and 93%, respectively, with PAC addition. Kinetic study conducted for the REACT period showed that both dyes exhibited a very pronounced inhibitory effect on the activities of the microorganisms. The addition of PAC was capable of reducing the inhibitory effect of only BR but not AR on the microorganisms.     

Efficient numerical computation and experimental study of temporally long equilibrium scour development around abutment

For the abutment bed scour to reach its equilibrium state, a long flow time is needed. Hence, the employment of usual strategy of simulating such scouring event using the 3D numerical model is very time consuming and less practical. In order to develop an applicable model to consider temporally long abutment scouring process, this study modifies the common approach of 2D shallow water equations (SWEs) model to account for the sediment transport and turbulence, and provides a realistic approach to simulate the long scouring process to reach the full scour equilibrium. Due to the high demand of the 2D SWEs numerical scheme performance to simulate the abutment bed scouring, a recently proposed surface gradient upwind method (SGUM) was also used to improve the simulation of the numerical source terms. The abutment scour experiments of this study were conducted using the facility of Hydraulics Laboratory at Nanyang Technological University, Singapore to compare with the presented 2D SGUM–SWEs model. Fifteen experiments were conducted with their scouring flow durations vary from 46 to 546 h. The comparison shows that the 2D SGUM–SWEs model gives good representation to the experimental results with the practical advantage.     

Isolation and identification of potential fungal species for spent engine lubrication oil remediation in Peninsular Malaysia

Improper disposal and spills of spent engine oil into the environment can result in contamination, which eventually affects humans through the food chain. Mycoremediation is an effective and inexpensive alternative to clean up spent engine oil contamination. In recent work, the potential effectiveness of fungi for degrading spent engine oil was confirmed, with the species identified through molecular identification. Fungi that were able to grow in Bushnell Haas Broth supplied with spent engine oil were identified with the potential to utilize spent engine oil as a carbon source. Six species of fungi namely Penicillium simplicissimum, Aspergillus nidulans, Aspergillus niger, Trichoderma longibrachiatum, Aspergillus ustus, and Aspergillus flavus were successfully identified in this study. Over a course of seven days, P. simplicissimum (21.11 percent) was identified as the most effective fungi in degrading spent engine oil, followed by A. nidulans (17.75 percent), A. niger (15.85 percent), T. longibrachiatum (15.12 percent), A. ustus (15.02 percent), and A. flavus (11.80 percent). As these species of fungi were isolated from the natural environment in Peninsular Malaysia, the potential of using these fungi as mycoremediation of spent engine oil was therefore confirmed.     

The environmental state as a model for the world? An analysis of policy repertoires in 37 countries

Scholars have proposed the analytical concept of the environmental state, a state where government actively addresses negative environmental externalities of economic activities. The mapping of environmental regulatory expansion in Western countries has been central in recent attempts to identify the environmental state empirically. Surprisingly little is known, however, when it comes to the environmental regulatory expansions in non-Western countries. Are there similar trends towards the emergence of environmental states in the non-West as well? From analysing data covering 25 policies in 37 countries, it appears that regulatory expansion has also occurred in the non-Western world, and the distinction between the West and the non-West has been reduced over time. There are non-Western countries among environmental pioneers, and there is some evidence for the trend of global convergence. Future research on environmental states should take into account emerging environmental states in the non-West.     

Impact of natural and calcined starfish (<Emphasis Type="Italic">Asterina pectinifera</Emphasis>) on the stabilization of Pb,Zn and As in contaminated agricultural soil

Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3–100 and 91.2–100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8–100 and 93.2–100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca–As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O) and portlandite (Ca(OH)₂) in the 10 % CSF-treated soil, while SEM–EDS analysis confirmed the needle-like structure of ettringite in which Pb was incorporated and stabilized in the 10 % CSF treatment.     

Aviation and global climate change in the 21st century

Aviation emissions contribute to the radiative forcing (RF) of climate. Of importance are emissions of carbon dioxide (CO₂), nitrogen oxides (NO_x), aerosols and their precursors (soot and sulphate), and increased cloudiness in the form of persistent linear contrails and induced-cirrus cloudiness. The recent Fourth Assessment Report (AR4) of the Intergovernmental Panel on Climate Change (IPCC) quantified aviation's RF contribution for 2005 based upon 2000 operations data. Aviation has grown strongly over the past years, despite world-changing events in the early 2000s; the average annual passenger traffic growth rate was 5.3% yr^?1 between 2000 and 2007, resulting in an increase of passenger traffic of 38%. Presented here are updated values of aviation RF for 2005 based upon new operations data that show an increase in traffic of 22.5%, fuel use of 8.4% and total aviation RF of 14% (excluding induced-cirrus enhancement) over the period 2000–2005. The lack of physical process models and adequate observational data for aviation-induced cirrus effects limit confidence in quantifying their RF contribution. Total aviation RF (excluding induced cirrus) in 2005 was ～55 mW m^?2 (23–87 mW m^?2, 90% likelihood range), which was 3.5% (range 1.3–10%, 90% likelihood range) of total anthropogenic forcing. Including estimates for aviation-induced cirrus RF increases the total aviation RF in 2005–78 mW m^?2 (38–139 mW m^?2, 90% likelihood range), which represents 4.9% of total anthropogenic forcing (2–14%, 90% likelihood range). Future scenarios of aviation emissions for 2050 that are consistent with IPCC SRES A1 and B2 scenario assumptions have been presented that show an increase of fuel usage by factors of 2.7–3.9 over 2000. Simplified calculations of total aviation RF in 2050 indicate increases by factors of 3.0–4.0 over the 2000 value, representing 4–4.7% of total RF (excluding induced cirrus). An examination of a range of future technological options shows that substantive reductions in aviation fuel usage are possible only with the introduction of radical technologies. Incorporation of aviation into an emissions trading system offers the potential for overall (i.e., beyond the aviation sector) CO₂ emissions reductions. Proposals exist for introduction of such a system at a European level, but no agreement has been reached at a global level.     

Occurrence and ecological hazard assessment of selected veterinary medicines in livestock wastewater treatment plants

The occurrence of some veterinary medicines in the livestock wastewater plants (WWTPs) was investigated. This investigation represented the occurrence of veterinary medicines to treat in the livestock WWTPs or be discharged into the water system in Korea since the sampling sites were widely distributed across the nation and samples were collected from the 11 livestock WWTPs. Nine antibiotics, two analgesics, and two disinfectants occurred in the livestock wastewater plants (WWTPs). From 11 livestock WWTP influents, chlortetracycline, oxytetracycline, acetylsalicylic acid, and disinfectants frequently occurred with the high concentrations. Meanwhile, sulfamethoxazole, erythromycin-H₂O, and trimethoprim did not occur during sampling periods. The values for log Kow of each chemical showed a high correlation with the number of hydrogen bonding acceptors and were important parameters to estimate and understand the biodegradability and toxicity of a compound in the environment. The biodegradability of each compound was proportional to the hydrophilicity of each compound and the toxicity was proportional to the number of hydrogen bonding acceptors of each compound. The expected introductory concentration (EIC), predicted exposure concentration (PEC), and hazard quotient showed that the livestock WWTP effluents were hazardous to ecosystems.     

Quality Assured Measurements of Animal Building Emissions: Gas Concentrations

Abstract

Comprehensive field studies were initiated in 2002 to measure emissions of ammonia (NH₃), hydrogen sulfide (H₂S), carbon dioxide (CO₂), methane (CH₄), nonmethane hydrocarbons (NMHC), particulate matter <10 µm in diameter, and total suspended particulate from swine and poultry production buildings in the United States.

This paper focuses on the quasicontinuous gas concentration measurement at multiple locations among paired barns in seven states. Documented principles, used in air pollution monitoring at industrial sources, were applied in developing quality assurance (QA) project plans for these studies. Air was sampled from multiple locations with each gas analyzed with one high quality commercial gas analyzer that was located in an environmentally controlled on-farm instrument shelter. A nominal 4 L/min gas sampling system was designed and constructed with Teflon wetted surfaces, bypass pumping, and sample line flow and pressure sensors. Three-way solenoids were used to automatically switch between multiple gas sampling lines with ≥10 min sampling intervals. Inside and outside gas sampling probes were between 10 and 115 m away from the analyzers. Analyzers used chemiluminescence, fluorescence, photoacoustic infrared, and photoionization detectors for NH₃, H₂S, CO₂, CH₄, and NMHC, respectively. Data were collected using personal computer-based data acquisition hardware and software. This paper discusses the methodology of gas concentration measurements and the unique challenges that livestock barns pose for achieving desired accuracy and precision, data representativeness, comparability and completeness, and instrument calibration and maintenance.     

Toluene vapor capture by activated carbon particles in a dual gas-solid cyclone system

Capturing of odorous compounds such as toluene vapor by a particulate-activated carbon adsorbent was investigated in a gas-solid cyclone, which is one type of mobile beds. The test cyclone was early modified with the post cyclone (PoC) and a spiral flow guide to the vortex finder. The proposed process may contribute to the reduction of gases and dust from industrial exhausts, especially when dealing with a low concentration of odorous elements and a large volume of dust flow. In this device, the toluene capturing efficiency at a 400 ppm concentration rose up to 77.4% when using activated carbon (AC) particles with a median size of 27.03 μm. A maximum 96% of AC particles could be collected for reuse depending on the size and flow rate. The AC regenerated via thermal treatment showed an adsorption potential up to 66.7% throughout repeated tests.

Implications: VOCs and particles have been of interest both in industrial field and public indoor spaces. In this study, a post cyclone (PoC) that utilizes a residual vortex from the mother cyclone was modified by inserting a flow guide and was applied to capture toluene vapor. The device of modified post-cyclone system can be used effectively in simultaneous treatment of gas-solid flow.