Comparison of arsenic uptake ability of barnyard grass and rice species for arsenic phytoremediation

In this research, the relative performance in arsenic (As) remediation was evaluated among some barnyard grass and rice species under hydroponic conditions. To this end, four barnyard grass varieties and two rice species were selected and tested for their remediation potential of arsenic. The plants were grown for 2 weeks in As-rich solutions up to 10 mg As L^?1 to measure their tolerance to As and their uptake capabilities. Among the varieties of plants tested in all treatment types, BR-29 rice absorbed the highest amount of As in the root, while Nipponbare translocated the maximum amount of As in the shoot. Himetainubie barnyard grass produced the highest biomass, irrespective of the quantity of As in the solution. In all As-treated solutions, the maximum uptake of As was found in BR-29 followed by Choto shama and Himetainubie. In contrast, while the bioaccumulation factor was found to be the highest in Nipponbare followed by BR-29 and Himetainubie. The results suggest that both Choto shama and Himetainubie barnyard grass varieties should exhibit a great potential for As removal, while BR-29 and Nipponbare rice species are the best option for arsenic phytoremediation.     

Characterization of products obtained from pyrolysis and steam gasification of wood waste,RDF, and RPF

Pyrolysis and steam gasification of woody biomass chip (WBC) obtained from construction and demolition wastes, refuse-derived fuel (RDF), and refuse paper and plastic fuel (RPF) were performed at various temperatures using a lab-scale instrument. The gas, liquid, and solid products were examined to determine their generation amounts, properties, and the carbon balance between raw material and products.The amount of product gas and its hydrogen concentration showed a considerable difference depending on pyrolysis and steam gasification at higher temperature. The reaction of steam and solid product, char, contributed to an increase in gas amount and hydrogen concentration. The amount of liquid products generated greatly depended on temperature rather than pyrolysis or steam gasification. The compositions of liquid product varied relying on raw materials used at 500 °C but the polycyclic aromatic hydrocarbons became the major compounds at 900 °C irrespective of the raw materials used. Almost fixed carbon (FC) of raw materials remained as solid products under pyrolysis condition whereas FC started to decompose at 700 °C under steam gasification condition.For WBC, both char utilization by pyrolysis at low temperature (500 °C) and syngas recovery by steam gasification at higher temperature (900 °C) might be practical options. From the results of carbon balance of RDF and RPF, it was confirmed that the carbon conversion to liquid products conspicuously increased as the amount of plastic increased in the raw material. To recover feedstock from RPF, pyrolysis for oil recovery at low temperature (500 °C) might be one of viable options. Steam gasification at 900 °C could be an option but the method of tar reforming (e.g. catalyst utilization) should be considered.     

High-performance liquid chromatography with conductimetric detection of perfluorocarboxylic acids and perfluorosulfonates

A rapid and simple method for separating and determining various environmentally harmful perfluorocarboxylic acids and perfluorosulfonates was successfully developed using high- performance liquid chromatography with conductimetric detection, for product and waste management of these compounds at manufacturing and processing sites. Compounds having C(3)-C(8) perfluoroalkyl groups were separated using a Tosoh TSKgel Super-ODS column and a mobile phase consisting of a mixture of methanol and aqueous NaH(2)PO(4) at several mixing ratios. The best detection limits for the compounds ranged from 0.12 to 0.66 mg l(-1) (ppm), and linear calibration graphs were obtained up to 87-109 mg l(-1). The combination of this method with concentration of the sample by solid-phase extraction with cartridges based on styrene-divinylbenzene-copolymer enabled the determination of approximately 50 microg l(-1) (ppb) for compounds with C(4)-C(8) perfluoroalkyl groups. This method was successfully used to monitor the artificial decomposition of the perfluorocarboxylic acid n-C(4)F(9)COOH induced by a photocatalyst.     

Removal of nitrogen oxides with organic amines and metal complexes

Aqueous solutions containing organic amines and metal complexes were applied for the removal of nitrogen oxides. Organic amines were effective for the removal of the mixture composed of nitric oxide and nitrogen dioxide. In particular, methyl and ethyl amines removed these species with 1 : 1 ratio from the mixture at fairly rapid rates. Dinitrogen trioxide (N₂O₃) was suggested to be involved in the course of the removal.Metal complexes removed nitrogen dioxide efficiently. As has been previously reported for a number of inorganic or organic redox systems, it was concluded that the removal of nitrogen dioxide by metal complexes proceeded also by the redox mechanism.Iron (ii) chelate complexes were highly effective for the removal of nitric oxide and this was attributed to a reversible coordination to the complex.     

Material properties of water-swelling material used as a water cutoff treatment material at waste landfill sites

Water-swelling material (WSM) is a fluid sealant obtained by blending high-absorbency polymer, a filler, and a solvent by using a synthetic resin elastomer as the base material. In this research, we studied experimentally the composition of WSM, the extent of swelling, the strength of the WSM and the long-term performance of the swelling material used as a jointed water cutoff treatment material at waste landfill sites. One of the results was that adjusting the degree of etherification of the high-absorbency polymer, which is a component of the WSM, and the resin content of the synthetic elastomer contributed to improvement of the swelling of the sealant and the strength of the swelling material. Further, in long-term tests, the strength of the WSM tended to become stabilized and it was confirmed that it had sufficient pressure resistance for use in coastal landfill sites, where its application as a water cutoff treatment material is being considered.     

State of mixture of atmospheric submicrometer black carbon particles and its effect on particulate light absorption

The state of mixture of light-absorbing carbonaceous particles was investigated in relation to light absorption properties using electron microscopic examinations, black carbon (BC) analyses of quartz filter by thermal/optical reflectance (TOR) method, measurements with two continuous light-absorbing photometers at a suburban site of Tsukuba, about 60 km northeast of Tokyo. The volume fraction of water-soluble material (?) in individual particles is important for assessing particulate light-absorbing and/or scattering of atmospheric aerosols. The values of ? in BC particles were evaluated by electron micrographs before and after dialysis (extraction) of water-soluble material. The mass absorption coefficient (MAC in units of m² g^?1) tended to increase with increasing the average ? in BC particles with the radius range of 0.05–0.5 μm. Thus, our results indicate that coatings of water-soluble material around BC particles can enhance the absorption of solar radiation. Moreover, the single scattering albedo (SSA) will increase because a large amount of coating material will scatter more light.     

Distribution of total mercury, methyl mercury and selenium in pod of killer whales (Orcinus Orca) stranded in the northern area of Japan: comparison of mature females with calves

Total mercury (T-Hg) and selenium (Se) concentrations in liver, kidney and muscle from a pod of killer whales including five mature females and three calves stranded in the northern area of Japan were analyzed. In the mature female, contamination level of T-Hg in the liver sample (62.2+/-21.9 microg/wet g) was markedly higher than that in kidney sample and muscle sample. The molar ratio of T-Hg to Se in the liver sample was approximately 1, and those in the kidney and muscle samples were markedly lower than 1. These results suggest that the formation of HgSe compound increases the hepatic accumulation of mercury (Hg). In contrast, contamination level of T-Hg in the calf organs was much lower than that in the mature female organs. These results suggest that the transfer of Hg from the mother to the fetus via placenta and/or to calf via milk is trace.     

Biochemical and Genetic Characterization of an Extracellular Poly(3-Hydroxybutyrate) Depolymerase from Acidovorax Sp. Strain TP4

To determine the properties of enzymes from bacteria that degrade polypropiolactone (PPL), we isolated 13 PPL-degrading bacteria from pond water, river water, and soil. Nine of these strains were identified as Acidovorax sp., three as Variovorax paradoxus, and one as Sphingomonas paucimobilis. All the isolates also degraded poly(3-hydroxybutyrate) (PHB). A PPL-degrading enzyme was purified to electrophoretical homogeneity from one of these bacteria, designated Acidovorax sp. TP4. The purified enzyme also degraded PHB. The molecular weight of the enzyme was estimated as about 50,000. The enzyme activity was inhibited by diisopropylfluorophosphate, dithiothreitol, and Triton X-100. The structural gene of the depolymerase was cloned in Escherichia coli. The nucleotide sequence of the cloned DNA fragment contained an open reading frame (1476 bp) specifying a protein with a deduced molecular weight of 50,961 (491 amino acids). The deduced overall sequence was very similar to that of a PHB depolymerase of Comamonas acidovorans YM1609. From these results it was concluded that the isolated PPL-degrading enzyme belongs to the class of PHB depolymerases. A conserved amino acid sequence, Gly-X₁-Ser-X₂-Gly (lipase box), was found at the N-terminal side of the amino acid sequence. Site-directed mutagenesis of the TP4 enzyme confirmed that ²⁰Ser in the lipase box was essential for the enzyme activity. This is the first report of the isolation a PHB depolymerase from Acidovorax.     

Feasibility Study of Airbag Concept Applicable to Motorcycles Without Sufficient Reaction Structure

Objectives: An airbag system for motorcycle applications was developed and marketed in 2006 followed by many research projects on the system. In the airbag system, the bag should be supported during the kinetic energy–absorbing period of a rider in a collision. The previously developed system employed a configuration in which motorcycle structures support the airbag, such as a gauge unit and/or a steering structure. The supporting structure functions to receive the reaction force to hold the airbag during a crash to properly absorb the rider's kinetic energy. However, the previous system requires a larger area for this reaction structure and is applicable only to the motorcycles that can provide that area. To overcome this limitation, we propose an airbag system employing another concept. In this concept, the airbag does not use its vehicle structures as a reaction structure but uses the structures of an opposing vehicle, such as doors and/or pillars of an opposing vehicle. In this project, we aim to verify the effectiveness of the proposed system when installed in a motorcycle that cannot provide a larger area for the reaction structure.

Methods: In the system with this concept, it is assumed that the occupant protection performance is largely affected depending on impact configurations. Accordingly, full-scale motorcycle-to-car crash tests using 125 cm³ scooter-type models with and without the proposed system were conducted in various impact configurations. The 7 impact configurations specified in ISO 13232 were selected as the test configurations. Injury variables and injury indices of head, neck, chest, and abdomen were evaluated with the motorcyclist dummy.

Results: Injury variables and indices obtained from the crash tests with the airbag were compared to those of the baseline tests. In 2 impact configurations, the airbags were supported by the side structures of the opposing vehicle and performed to reduce the injury variable of head and/or chest compared to that of the baseline test.

Conclusion: Through the crash tests, beneficial protection effects of the airbag system were confirmed in particular impact configurations. No significant risk for the occupant due to the airbag was observed in the conducted crash tests. It was concluded that the proposed airbag system has feasibility to reduce rider injury in a collision of a motorcycle without sufficient reaction structure.     

Erythrocyte supply from the spleen and hemoconcentration in hypoxic yellowtail

Hematocrit and hemoglobin concentration of yellowtail blood elevated more than 30% during severe hypoxia for 35 or 40 min. About 40% of the hematocrit elevation is considered to have been caused by erythrocyte supply from the spleen, and about 60% by hemoconcentration due to water shift out of the circulating plasma. Osmotic swelling of erythrocytes is considered not to have occurred, judging from the constant level in the saturation index of the blood.