Wind Tunnel Modelling of Roadways: Comparison with Mathematical Models

The assessment of air quality impacts from roadways is a major concern to urban planners. In order to assess future road and building configurations, a number of techniques have been developed, including mathematical models, which simulate traffic emissions and atmospheric dispersion through a series of mathematical relationships and physical models. The latter models simulate emissions and dispersion through scaling of these processes in a wind tunnel. Two roadway mathematical models, HIWAY-2 and CALINE-4, were applied to a proposed development in a large urban area. Physical modelling procedures developed by Rowan Williams Davies & Irwin Inc. (RWDI) in the form of line source simulators were also applied, and the resulting carbon monoxide concentrations were compared. The results indicated a factor of two agreement between the mathematical and physical models. The physical model, however, reacted to changes in building massing and configuration. The mathematical models did not, since no provision for such changes was included in the mathematical models. In general, the RWDI model resulted in higher concentrations than either HIWAY-2 or CALINE-4. Where there was underprediction, it was often due to shielding of the receptor by surrounding buildings. Comparison of these three models with the CALTRANS Tracer Dispersion Experiment showed good results although concentrations were consistently underpredicted.     

Controlled Enrichment System for Experimental Fumigation of Plants in the Field with Sulfur Dioxide

A prototype Free-Air Controlled Enrichment (FACE) system was developed at Brookhaven National "Laboratory (BNL) for the experimental control of gas concentrations in an open field, without any form of enclosure. This FACE system consists of a toroidal plenum chamber, 15 m in diameter, with a series of 32 vertical vent pipes from which the release of a test gas can be controlled. Data on gas concentration at the center of the array and wind velocity are fed to a microprocessor where a proportional, integrative, differential (PID) algorithm is used to regulate a mass-flow controller. Data on wind direction are used to control the opening and closing of the vertical vent pipes to maintain an upwind release. In 72 hours of continuous operation during which wind velocity varied between 0.3 to 8 m sec^-1, the FACE prototype maintained 1 -min averaged concentrations within twenty percent of the 40 ppb set point 94 percent of the time.     

Sustainable development conflict over freeway construction

Environmental disputes arise due to opposing views of various groups about their environmental concerns and their economic or developmental interests. Development and protection of the environment constitute two main contradictory objectives within the sustainable development paradigm, which are often in conflict. The decision support system, GMCR II, which implements the graph model for conflict resolution, is employed to model and analyze an environmental dispute arising over the construction of a new freeway between the Iranian capital, Tehran, and the city of Chalous located in the north of the country. This study demonstrates that the graph model for conflict resolution can be used as a methodology to promote a reasonable balance between economic development and environmental protection from a strategic viewpoint. In addition to systematically modelling the conflict by putting the existing information into proper perspective, it is shown how conflict analysis can be used for comparing alternative scenarios and predicting possible future outcomes. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Electricity from Fossil Fuels without CO2 Emissions: Assessing the Costs of Carbon Dioxide Capture and Sequestration in U.S. Electricity Markets

ABSTRACT

The decoupling of fossil-fueled electricity production from atmospheric CO₂ emissions via CO₂ capture and sequestration (CCS) is increasingly regarded as an important means of mitigating climate change at a reasonable cost. Engineering analyses of CO₂ mitigation typically compare the cost of electricity for a base generation technology to that for a similar plant with CO₂ capture and then compute the carbon emissions mitigated per unit of cost. It can be hard to interpret mitigation cost estimates from this plant-level approach when a consistent base technology cannot be identified. In addition, neither engineering analyses nor general equilibrium models can capture the economics of plant dispatch. A realistic assessment of the costs of carbon sequestration as an emissions abatement strategy in the electric sector therefore requires a systems-level analysis. We discuss various frameworks for computing mitigation costs and introduce a simplified model of electric sector planning. Results from a “bottom-up” engineering-economic analysis for a representative U.S. North American Electric Reliability Council (NERC) region illustrate how the penetration of CCS technologies and the dispatch of generating units vary with the price of carbon emissions and thereby determine the relationship between mitigation cost and emissions reduction.     

Comparison of Statistical Designs and Experimental Protocols Used to Evaluate Rain Acidity Effects on Field-Grown Soybeans

Published results of four field experiments testing effects of acidic precipitation in field-grown soybeans have led to contradictory conclusions. This paper examines the experimental procedures and protocols of the four experiments which could have contributed to differences in both the reported crop yields and the interpretations or conclusions drawn from the experiments.

The most important difference among the experiments is in their statistical designs. Two of the field layouts used only one plot per treatment, providing replication only for plants, rows or sectors within plots, but not among plots. By using real data from a highly replicated experiment it is shown that with such deficient statistical designs treatment effects cannot be separated from other microenvironmental variables peculiar to a specific plot location.

The other two experiments were highly replicated. They were designed to detect differences of approximately 10% among treatment means. Type 1 error, a, was predetermined, and replication was sufficient to keep type 2 error low. This design was made possible because a preliminary experiment was available to estimate the expected components of variance. Despite differences in the procedures and protocols among the four experiments, it is primarily the quality of the experimental design which has determined their validity and relative utility for crop loss assessment.     

Concentration and characterization of plutonium in soils of Hubei in central China

To study the Pu concentration and isotope ratio distributions present in China, the ^239+240Pu total activities and ²⁴⁰Pu/²³⁹Pu atom ratios in core soil samples from Hubei Province in central China were investigated using Accelerator Mass Spectrometry (AMS). The activities ranged from 0.019 to 0.502 mBq g⁻¹ and the ^239+240Pu inventories of 45 and ∼55 Bq m⁻² agree well with that expected from global fallout. The ²⁴⁰Pu/²³⁹Pu atom ratios in the soil ranged from 0.172 to 0.220. The ratios are similar to typical global fallout values. Hence, any close-in fallout contribution from the Chinese nuclear weapons tests, mainly conducted in the 1970s, must have either been negligible or had a similar ²⁴⁰Pu/²³⁹Pu ratio to that of global fallout. The top 10 cm layer of the soil contributes ∼90% of the total inventory and the maximum concentrations appeared in the 2-4 cm or 4-6 cm layers. It is suggested that climatic conditions and organic content are the two main factors that affect the vertical migration of plutonium in soil.     

Public participation in municipal solid waste source-separated collection in Guilin,China: status and influencing factors

Currently, China is facing critical problems regarding the management of municipal solid waste (MSW). The failure of existing pilot programs in implementing MSW source-separated collection highlights the need to analyze the factors significantly influencing public participation in this activity. To this end, a comprehensive analysis of MSW source-separated collection in Guilin, which is representative of wider areas located in inland China and with a GDP around the national average, was conducted. The research consisted of in-person interviews involving a questionnaire and theoretical analyses in terms of public perception, public awareness, public attitude, and willingness to pay. The analytical results identify the status of waste source-separated collection and influencing factors in implementation, and provides exercisable suggestions for decision makers in both China and more generally in industrializing countries to design promotion programs and education campaigns.     

Variation of the Relative Humidity of Air Released from Canisters after Ambient Sampling

ABSTRACT

Dalton's law of partial pressures and the hypothesis that water vapor equilibrium in a canister is identical to that established above liquid water are used to predict the variation of the percent relative humidity (%RH) of air released from canisters used in ambient air sampling, typically 6-L canisters pressurized with 18 L of air. When (and if) the water vapor partial pressure in a canister exceeds its saturation vapor pressure, water vapor condensation begins and the condensation rate equals the sampling rate of water vapor into the canister. Under constant temperature conditions, the air subsequently released from the canister is less humid than the original sample, following the relationship %RH = 100% (6 L/V_s) for V_s> V_r, where V_s is the residual air volume (referenced to atmospheric pressure), and V_r is shown to depend on the %RH of the ambient air sample. V_r is the residual air volume at which water is completely removed (except for adsorbed water vapor) from the canister wall. For V_s < V_r, the predicted %RH is constant and equal to its value at V_r. Experimental values agree reasonably well with predictions at both high (90%) and low (34%) RH. However, experimental values are often slightly displaced (usually towards lower values of %RH) for mid-range %RH (61%) and variations in %RH near V_r change from canister to canister.     

Sulfate and Nitrate in Total Suspended Participate in Ontario

In order to make the information in the Federal Register more easily accessible, a summary has been prepared of Federal standards of performance for new stationary sources of air pollution. The standards of performance promulgated by the Environmental Protection Agency in the period from December 1971 through June 1979 are presented in tabular form.     

ECONOMIC POLICIES FOR REGULATING AGRICULTURAL DRAINAGE WATER1

ABSTRACT: Agricultural drainage water is a major source of environmental pollution in many areas. This paper reviews the literature on the economics of nonpoint-source pollution and applies it to the regulation of agricultural drainage water. Four types of regulatory policies are considered. The empirical analysis is carried out for cotton production in the San Joaquin Valley of California. Variable inputs are the quantity of water applied and the type of irrigation system. All four policies can achieve economic efficiency under the conditions assumed here, but the policies differ in terms of the distributional impacts and administrative requirements.