Aerosol optical properties derived from imultaneoussunphotometer and aureolemeter measurements in Lhasa

In order to obtain some aerosol properties in Tibetan Plateau atmosphere, simultaneous measurements of aerosols by use of a sunphotometer and an aureolementer were performed in the summer of 1998 in Lhasa(29.65°N, 91.13°E). Optical depth, volume size distribution and phase-function of aerosols were obtained from the measurements. Religious activities can have an effect on optical depth in Lhasa. The daily average aerosol optical depth(λ相似文献   

Three-dimensional diffusion of non-sorbing species in porous sandstone: computer simulation based on X-ray microtomography using synchrotron radiation

The diffusion pathways of porous sandstone were examined by a three-dimensional (3-D) imaging technique based on X-ray computed tomography (CT) using the SPring-8 (Super Photon ring-8 GeV, Hyogo, Japan) synchrotron radiation facility. The analysis was undertaken to develop better understanding of the diffusion pathways in natural rock as a key factor in clarifying the detailed mechanism of the diffusion of radionuclides and water molecules through the pore spaces of natural barriers in underground nuclear waste disposal facilities. A cylindrical sample (diameter 4 mm, length 6 mm) of sandstone (porosity 0.14) was imaged to obtain a 3-D image set of 450(3) voxels=2.62(3) mm(3). Through cluster-labeling analysis of the 3-D image set, it was revealed that 89% of the pore space forms a single large pore-cluster responsible for macroscopic diffusive transport, while only 11% of the pore space is made up of isolated pores that are not involved in long-range diffusive transport. Computer simulations of the 3-D diffusion of non-sorbing random walkers in the largest pore cluster were performed to calculate the surface-to-volume ratio of the pore, tortuosity (diffusion coefficient in free space divided by that in porous rock). The results showed that (i) the simulated surface-to-volume ratio is about 60% of the results obtained by conventional pulsed-field-gradient proton nuclear magnetic resonance (NMR) laboratory experiments and (ii) the simulated tortuosity is five to seven times larger than the results of laboratory diffusion experiments using non-sorbing I(-) and Br(-). These discrepancies are probably attributed to the intrinsic sample heterogeneity and limited spatial resolution of the CT system. The permeability was also estimated based on the NMR diffusometry theory using the results of the random walk simulations via the Kozeny-Carman equation. The estimated permeability involved an error of about 20% compared with the permeability measured by the conventional method, suggesting that the diffusometry-based NMR well logging with gradient coils is applicable to the in-situ permeability measurement of strata. The present study demonstrated that X-ray CT using synchrotron radiation is a powerful tool for obtaining 3-D pore structure images without the beam-hardening artifacts inevitable in conventional CT using X-ray tubes.     

New energy policy and low-carbon society in Japan after the Great East Japan Earthquake

The Great East Japan Earthquake in March 2011 devastated the eastern region of Japan.Due to the resulting nuclear accident,Japanese Cabinet decided to revise its energy policies.The Energy and Environment Council in National Policy Unit published options on the nation’s scenarios for energy and economy in 2030.We estimated the economic impacts of the options to national economy and households in 2030.Finally,we clarified significant factors to establish a secure,affluent and low-carbon society based on the energy scenarios.     

Inbreeding avoidance or tolerance? Comparison of mating behavior between mass-reared and wild strains of the sweet potato weevil

Inadvertent selection is an important genetic process that frequently occurs during laboratory culture. The mass-reared strain of the sweet potato weevil Cylas formicarius exhibits stronger inbreeding depression than the wild strain does. When inbreeding depression occurs in a population, mating with a close relative is often considered maladaptive; however, in some contexts, the inclusive fitness benefits of inbreeding may outweigh the costs, favoring individuals that tolerate a low level of inbreeding depression. Theory predicts that mass-reared strain weevils will avoid inbreeding while wild strain weevils will tolerate inbreeding. To examine this prediction, we compared the effect of relatedness on the mating and insemination successes in mass-reared and wild strains of C. formicarius. While close relative pairs of the wild strain copulated less frequently than non-kin pairs, almost all mass-reared strain pairs copulated irrespective of relatedness. The results showed that the strain with weak inbreeding depression (wild strain) avoided inbreeding, whereas the strain with strong inbreeding depression (mass-reared strain) tolerated inbreeding. The contradiction between the theoretical prediction and our results is discussed from the perspective of laboratory adaptation, mating systems, and life history of C. formicarius.     

Distribution of total mercury, methyl mercury and selenium in pod of killer whales (Orcinus Orca) stranded in the northern area of Japan: comparison of mature females with calves

Total mercury (T-Hg) and selenium (Se) concentrations in liver, kidney and muscle from a pod of killer whales including five mature females and three calves stranded in the northern area of Japan were analyzed. In the mature female, contamination level of T-Hg in the liver sample (62.2+/-21.9 microg/wet g) was markedly higher than that in kidney sample and muscle sample. The molar ratio of T-Hg to Se in the liver sample was approximately 1, and those in the kidney and muscle samples were markedly lower than 1. These results suggest that the formation of HgSe compound increases the hepatic accumulation of mercury (Hg). In contrast, contamination level of T-Hg in the calf organs was much lower than that in the mature female organs. These results suggest that the transfer of Hg from the mother to the fetus via placenta and/or to calf via milk is trace.     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

Occurrence of estrogenic endocrine disrupting chemicals concern in sewage plant effluent

The purpose of this study was to give a worldwide overview of the concentrations of typical estrogenic endocrine disrupting chemicals （EDCs） in the effluent of sewage plants and then compare the concentra- tion distribution of the estrogenic EDCs in ten countries based on the survey data of the estrogenic EDCs research. The concentrations of three main categories （totally eight kinds） of estrogenic EDCs including steroidal estrogens （estrone （El）, estradiol （E2）, estriol （E3） and 17a- ethynylestradiol （EE2））, phenolic compounds （nonylphe- nol （NP） and bisphenol A （BPA）） and phthalate esters （dibutyl phthalate （DBP） and dibutyl phthalate （2- ethylhexyl） phthalate （DEHP）） in the effluents of sewage plants reported in major international journals over the past decade were collected. The statistics showed that the concentration distributions of eight kinds of EDCs were in the range of ng·L^-1 to μg·L^-1. The concentrations of steroidal estrogens mainly ranged within 50.00 ng. L-1, and the median concentrations of El, E2, E3 and EE2 were 11.00, 3.68, 4.90 and 1.00 ng·L^-1, respectively. Phenolic compounds and phthalate esters were found at pg. L-1 level （some individual values were at the high level of 40.00 μg·L^-1）. The median concentrations of BPA, NP, DBP and DEHP were 0.06, 0.55, 0.07 and 0.88 μg·L^-1, respectively. The concentrations of phenolic compounds and phthalate esters in the effluents were higher than that of steroids estrogens. The analysis of the concentration in various ten countries showed that steroids estrogens, phenolic compounds and phthalate esters in sewage plant effluents were detected with high concentration in Canada, Spain and China, respectively.     

Explosion properties of highly concentrated ozone gas

The explosive self-decomposition characteristics of gaseous ozone with a concentration of up to almost 100 vol% were quantitatively investigated using a closed system with an electric spark device. The lower self-decomposition (explosion) limit for ozone diluted with oxygen at room temperature and atmospheric pressure was 10–11 vol%, and so ozone at more than 10–11 vol% will lead to an explosive chain decomposition reaction leading to its complete conversion to oxygen in a vessel. The lower explosion limit shifts to a higher concentration with a decrease in pressure. The limit was about 80 vol% under a reduced pressure of 10 Torr. We also confirmed that explosion trigger energy (minimum ignition energy) is strongly dependent on ozone concentration and pressure. For example, the minimum trigger energy for 15 vol% ozone at a pressure of 76 Torr (about 220 mJ) was more than 20-fold that at atmospheric pressure (about 10 mJ), and that for 13 vol% ozone (about 580 mJ) was approximately 30 times higher than that for 20 vol% (about 20 mJ) at the same pressure of 76 Torr. Moreover, the physical characteristics of the trigger energy sources (e.g. spark gap and electrode tip angle) leading to the decomposition (explosion) of ozone were investigated under various conditions.     

Synthesis of polychlorinated dibenzofuran isomers and their gas chromatographic profiles

Fifty-one polychlorinated dibenzofuran (PCDF) isomers were synthesized by the structure specific methods starting from corresponding chlorophenol and chloronitrobenzene or chlorophenol and chlorodiphenyl iodonium salt. Structures of the synthesized PCDF isomers were confirmed by mass spectrometry and proton magnetic resonance spectroscopy. Gas chromatographic retention times and response factors of the PCDF isomers were determined on the fused silica capillary columns of SP-2330 and OV-101.     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.