Alcaligenes sp.YF11菌对杀灭菊酯的降解机理

测定了降解菌Alcaligenessp.YF11对不同浓度杀灭菊酯的降解及其降解途径。在纯培养系统中,Alcaligenessp.YF11对100mg／L的杀灭菊酯的降解符合零级动力学特征,其降解速率为2．1mg／L·h;50mg／L的杀灭菊酯在24h的降解率为87.5％;10mg／L的杀灭菊酯10h的降解率为71．0％。Alcaligenesso．YF11对杀灭菊酯的降解为矿化作用。     

Deodorization of dimethyl sulfide using a discharge approach at room temperature

The traditional technologies for odor removal of thiol usually create either secondary pollution for scrubbing, adsorption, and absorption processes, or sulfur (S) poisoning for catalytic incineration. This study applied a laboratory-scale radio-frequency plasma reactor to destructive percentage-grade concentrations of odorous dimethyl sulfide (CH3SCH3, or DMS). Odor was diminished effectively via reforming DMS into mainly carbon disulfide (CS2) or sulfur dioxide (SO2). The removal efficiencies of DMS elevated significantly with a lower feeding concentration of DMS or a higher applied rf power. A greater inlet oxygen (O2)/DMS molar ratio slightly improved the removal efficiency. In an O2-free environment, DMS was converted primarily to CS2, methane (CH4), acetylene (C2H2), ethylene (C2H4), and hydrogen (H2), with traces of hydrogen sulfide (H2S), methyl mercaptan (CH3SH), and dimethyl disulfide. In an O2-containing environment, the species detected were SO2, CS2, carbonyl sulfide, carbon dioxide (CO2), CH4, C2H4, C2H2, H2, formaldehyde, and methanol. Differences in yield of products were functions of the amounts of added O2 and the applied power. This study provided useful information for gaining insight into the reaction pathways for the DMS dissociation and the formation of products in the plasmolysis and conversion processes.     

Effect of adsorbents coated with titanium dioxide on the photocatalytic degradation of propoxur

Photocatalytic oxidation of pesticides in aqueous media irradiated by UV light is a rapidly growing field of research. Therefore, the treatment technology for degradation of propoxur (an insecticide) using titanium dioxide coated on the supports such as activated carbon, zeolite, brick, quartz and glass beads, was performed in this research. Results show that GAC/TiO2 is the best complexing agent for oxidizing propoxur because of its adsorption properities. The others follow the sequence: plain TiO2 > glass beads > zeolite > brick > quartz. The degradation rate of propoxur with plain TiO2 is higher than that with TiO2/GAC complexing agent. But the mineralization rate of propoxur with plain TiO2 is lower than that with TiO2/GAC complexing agent. However, it can be concluded that using GAC as the support can improve the photocatalytic efficiency.     

Risk-based approach to appraise valve closure in the clam Corbicula fluminea in response to waterborne metals

We developed a risk-based approach to assess how the valve closure behavior of Asiatic clam Corbicula fluminea responds to waterborne copper (Cu) and cadmium (Cd). We reanalyzed the valve closure response data from published literature to reconstruct the response time-dependent dose-response profiles based on an empirical three-parameter Hill equation model. We integrated probabilistic exposure profiles of measured environmental Cu and Cd concentrations in the western coastal areas of Taiwan with the reconstructed dose-response relationships at different integration times of response to quantitatively estimate the valve response risk. The risk assessment results implicate exposure to waterborne Cu and Cd may pose no significant risk to clam valve activity in the short-time response periods (e.g., <30 min), yet a relative high risk for valve closure response to waterborne Cu at response times greater than 120 min is alarming. We successfully linked reconstructed dose-response profiles and EC50-time relationships associated with the fitted daily valve opening/closing rhythm characterized by a three-parameter lognormal function to predict the time-varying bivalve closure rhythm response to waterborne metals. We parameterized the proposed predictive model that should encourage a risk-management framework for discussion of future design of biological monitoring systems.     

How to accurately assay the algal toxicity of pesticides with low water solubility

A novel method for assaying and calculating the toxicity of water-insoluble pesticides to green algae has been put forward in this work. First, a solvent is selected for use in bioassays; there should be a detailed screening to identify a solvent with inherently low toxicity to the test organism. Second, the EC50 is determined for selected pesticides by measuring the toxicity of various concentrations of each of the selected pesticides in a fixed concentration of selected solvent. Third, concentrations of the selected solvent are varied and the EC50 of each pesticide tested is assayed at a fixed concentration. Fourth, several suitable groups of solvent concentrations are selected and the corresponding EC50 values of tested pesticides are considered to establish the linear regression equation. Letting the solvent concentration be zero, one calculates the corresponding EC50 value, which corresponds to the inherent toxicity of the tested pesticide.     

废纸造纸废水处理工程应用

报道了自制混凝剂产品处理废纸造纸废水的工程应用情况。经过 1年多的运行结果表明 ,当进水CODCr、悬浮物浓度分别为 972mg/L、82 5mg/L以及色度为 3 0 0倍时 ,采用该工艺处理后 ,CODCr去除率平均为 95 .7% ,SS去除率平均为 98.9% ,色度去除率平均为 99.3 % ,出水水质远低于国家一级排放标准 (GB3 5 44 - 92 ) ,并且工厂实践表明 ,对生产有显著的效益 ,从而证明该方法对于废纸造纸废水的处理是可行的。该处理工艺设备简单 ,系统运行稳定 ,操作方便 ,成本低     

城市污泥的重金属生物活性及其控制

随着土壤法规的加强 ,城市污泥中的重金属严重影响着污泥的处理、处置。介绍了污泥中重金属的分配和化学形态 ,以及迄今为止几种主要的控制方法     

Effect of photosensitizer diethylamine on the photodegradation of polychlorinated biphenyls

The objective of this study was to investigate the effect of diethylamine and xenon simulated sunlight on the photodegradation of two forms of PCBs including PCBs in transformer oil and PCB congener 138. The result of GC chromatograms illustrated the shifting pattern of higher chlorinated biphenyls in transformer oil degraded to lower chlorinated biphenyls with the extension of exposure time. The effect of diethylamine and xenon simulated sunlight was significant on the photodegradation of both PCBs in transformer oil and congener 138. The initial degradation rates of congener 138 (1.14 x 10(-9) to 4.47 x 10(-9) mol l(-1) h(-1)) were in direct proportion to the initial concentrations of congener 138 which confirmed the pseudo-first-order reaction of PCB photodegradation. The apparent quantum yields (phi) of congener 138 using diethylamine in xenon photoreactor were ranged between 2.08 x 10(-2) and 9.8 x 10(-4). PCB congeners 123, 97, 70, 67, 33, 29, 17, 12, and 9 were detected as the descendants of the photodegradation of congener 138 through dechlorination. The major pathway of congener 138 photodegradation in this study was via para-dechlorination.     

Urban stormwater quality control analysis with detention ponds.

This paper presents methodologies for the development of stormwater quality control measures based on the derived probability distribution approach. These stormwater control measures, such as the fraction of pollutant removed from storage facilities, are closed-form analytical models and can be effectively used to evaluate pollutant loads to receiving waters. In this study, a simple form of rainfall-runoff transformation with lumped parameters is first extended to take into account the spatial variations in model parameters. Second, the infiltration process is further incorporated to the rainfall-runoff transformation. This study demonstrates that analytical models can be developed with various levels of complexity based on different hydrologic considerations. The performance of the analytical models is evaluated in a case study, and the results indicate that, with an appropriately formulated rainfall-runoff transformation, analytical stormwater runoff models are capable of providing comparable results to continuous simulation models in the evaluation of the long-term performance of storage facilities.     

垃圾堆放发酵机理与应用工艺研究

对垃圾的发酵机理进行了实验研究,对渗沥液的析出量及其酸碱度、堆酵后垃圾热值的变化以及堆内温度的变化进行了观测,并对堆酵过程的机理进行了初步分析,给出了垃圾堆酵应用工艺的建议.