Gas permeability of biochar-amended clay: potential alternative landfill final cover material

Compacted biochar-amended clay (BAC) has been proposed as an alternative landfill final cover material in this study. Biochar has long been proposed to promote crop growth, mitigate odor emission, and promote methane oxidation in field soils. However, previous studies showed that soil-gas permeability was increased upon biochar application, which will promote landfill gas emission. The objective of the present study is to investigate the possibility of using compacted BAC as an alternative material in landfill final cover by evaluating its gas permeability. BAC samples were prepared by mixing 425-μm-sieved peanut shell biochar with kaolin clay in different ratios (0, 5, 10, and 15 %, w/w) and compacting at different degrees of compactions (DOC) (80, 85, and 90 %) with an optimum water content of 35 %. The gas permeability of the BACs was measured by flexible wall gas permeameter and the microstructure of the BACs was analyzed by SEM with energy-dispersive x-ray spectroscopy (EDX). The results show that the effects of biochar content on BAC gas permeability is highly dependent on the DOC. At high DOC (90 %), the gas permeability of BAC decreases with increasing biochar content due to the combined effect of the clay aggregation and the inhibition of biochar in the gas flow. However, at low DOC (80 %), biochar incorporation has no effects on gas permeability because it no longer acts as a filling material to the retard gas flow. The results from the present study imply that compacted BAC can be used as an alternative final cover material with decreased gas permeability when compared with clay.     

Effects of 4-methylbenzylidene camphor (4-MBC) on neuronal and muscular development in zebrafish (<Emphasis Type="Italic">Danio rerio</Emphasis>) embryos

The negative effects of overexposure to ultraviolet (UV) radiation in humans, including sunburn and light-induced cellular injury, are of increasing public concern. 4-Methylbenzylidene camphor (4-MBC), an organic chemical UV filter, is an active ingredient in sunscreen products. To date, little information is available about its neurotoxicity during early vertebrate development. Zebrafish embryos were exposed to various concentrations of 4-MBC in embryo medium for 3 days. In this study, a high concentration of 4-MBC, which is not being expected at the current environmental concentrations in the environment, was used for the purpose of phenotypic screening. Embryos exposed to 15 μM of 4-MBC displayed abnormal axial curvature and exhibited impaired motility. Exposure effects were found to be greatest during the segmentation period, when somite formation and innervation occur. Immunostaining of the muscle and axon markers F59, znp1, and zn5 revealed that 4-MBC exposure leads to a disorganized pattern of slow muscle fibers and axon pathfinding errors during the innervation of both primary and secondary motor neurons. Our results also showed reduction in AChE activity upon 4-MBC exposure both in vivo in the embryos (15 μM) and in vitro in mammalian Neuro-2A cells (0.1 μM), providing a possible mechanism for 4-MBC-induced muscular and neuronal defects. Taken together, our results have shown that 4-MBC is a teratogen and influences muscular and neuronal development, which may result in developmental defects.     

Effects of alkaline and bioorganic amendments on cadmium,lead, zinc,and nutrient accumulation in brown rice and grain yield in acidic paddy fields contaminated with a mixture of heavy metals

Paddy soils and rice (Oryza sativa L.) contaminated by mixed heavy metals have given rise to great concern. Field experiments were conducted over two cultivation seasons to study the effects of steel slag (SS), fly ash (FA), limestone (LS), bioorganic fertilizer (BF), and the combination of SS and BF (SSBF) on rice grain yield, Cd, Pb, and Zn and nutrient accumulation in brown rice, bioavailability of Cd, Pb, and Zn in soil as well as soil properties (pH and catalase), at two acidic paddy fields contaminated with mixed heavy metals (Cd, Pb, and Zn). Compared to the controls, SS, LS, and SSBF at both low and high additions significantly elevated soil pH over both cultivation seasons. The high treatments of SS and SSBF markedly increased grain yields, the accumulation of P and Ca in brown rice and soil catalase activities in the first cultivation season. The most striking result was from SS application (4.0 t ha^?1) that consistently and significantly reduced the soil bioavailability of Cd, Pb, and Zn by 38.5–91.2 % and the concentrations of Cd and Pb in brown rice by 20.9–50.9 % in the two soils over both cultivation seasons. LS addition (4.0 t ha^?1) also markedly reduced the bioavailable Cd, Pb, and Zn in soil and the Cd concentrations in brown rice. BF remobilized soil Cd and Pb leading to more accumulation of these metals in brown rice. The results showed that steel slag was most effective in the remediation of acidic paddy soils contaminated with mixed heavy metals.     

Improving cross-sectoral climate change adaptation for coastal settlements: insights from South East Queensland,Australia

Climate change impacts affecting coastal areas, such as sea-level rise and storm surge events, are expected to have significant social, economic and environmental consequences worldwide. Ongoing population growth and development in highly urbanised coastal areas will exacerbate the predicted impacts on coastal settlements. Improving the adaptation potential of highly vulnerable coastal communities will require greater levels of planning and policy integration across sectors and scales. However, to date, there is little evidence in the literature which demonstrates how climate policy integration is being achieved. This paper contributes to this gap in knowledge by drawing on the example provided by the process of developing cross-sectoral climate change adaptation policies and programmes generated for three coastal settlement types as part of the South East Queensland Climate Adaptation Research Initiative (SEQCARI), a 3-year multi-sectoral study of climate change adaptation options for human settlements in South East Queensland, Australia. In doing so, we first investigate the benefits and challenges to cross-sectoral adaptation to address climate change broadly and in coastal areas. We then describe how cross-sectoral adaptation policies and programmes were generated and appraised involving the sectors of urban planning and management, coastal management, emergency management, human health and physical infrastructure as part of SEQCARI. The paper concludes by discussing key considerations that can inform the development and assessment of cross-sectoral climate change adaptation policies and programmes in highly urbanised coastal areas.     

Determination of ozone in outdoor and indoor environments using nitrite-impregnated passive samplers followed by ion chromatography

An improved ion chromatographic (IC) method has been developed for the separation of nitrate in filter extracts in the presence of high concentrations of nitrite. This analytical method was successfully used for an indirect measurement of ozone (O3) in outdoor and indoor air, following its collection using a nitrite-impregnated passive sampler. The limit of detection and the limit of quantification, using the modified IC method, were 6 microg l(-1) (3sigma) and 20 microg l(-1) (10sigma), respectively. Improved detection limits and low baseline noise were obtained with the use of eluent generator and high-capacity ion exchange column. The optimized method was used for assessing O3 concentration in both indoor and outdoor environments of 28 child care centers (CCCs) located in different parts of Singapore. The O3 concentrations ranged from 0.1 to 11.95 parts per billion (ppb) in indoor and from 3.2 to 21.7 ppb in outdoor environments during the study period. It was found that, among the CCCs investigated in this study, air-conditioned CCCs and those located in close proximity to traffic emissions had significantly lower O3 concentrations indoors.     

Catalytic Activity of Biomorphic α-MoO(3) in the Degradation of Methyl Violet Dye

A network of fibers comprising orthorhombic molybdenum trioxide (α-MoO(3)) crystals were synthesized using paper as template via a biomorphic approach. The template was completely removed by annealing the sample at 600°C for 5?min. Monoclinic MoO(3) was formed and consequently converted into orthorhombic α-MoO(3) after prolonged annealing. Three milligrams of the biomorphic α-MoO(3) could degrade up to 90% of a methyl violet aqueous solution with a concentration of 20?mg/L under normal visible light. The size of the α-MoO(3) grains and the porosity of the biomorphic sample affected catalytic performance.     

Historical trends of polychlorinated dibenzo-p-dioxins and dibenzofurans in three dated sediment cores from Mexico

This paper describes the first report of dioxins and furans (PCDDs/Fs) in sediment cores from Mexico. Sedimentation rates and vertical fluxes were estimated using ²¹⁰Pb dating. Two cores correspond to marine sediments and one to an endorheic lake. Concentrations of PCDDs/Fs found in the three sites are typical of non-impacted areas with low concentrations when compared to reference values. However the PCDDs/Fs sediment profiles show an increasing concentration trend in the upper core sections. This behavior is different from that found at many sites around the globe where diminishing concentrations have been reported. A strong predominance of OCDD was observed, and a comparison to typical composition profiles of industrial and other sources did not result in clear origin assignments for these measured compounds. We suggest that local sources may be responsible for the increase in concentration and, because these undetermined sources have not been curtailed, their importance is still growing.     

Dietary exposure to DDT of secondary school students in Hong Kong

The aim of this study was to determine the dietary exposure of DDT in foodstuffs consumed in Hong Kong by secondary school students in Hong Kong in 2005. Food samples of domestic or imported food were collected randomly from local markets for the determination of DDT. The analytical method for this survey was based on isotope dilution technique. DDT isomers were determined at parts per billion (mugkg(-1)) levels in foods by pressured fluid extraction followed by gel permeation column cleanup and gas chromatography with mass spectrometry detection. Among the 98 composite samples, 25 were found positive with DDT levels greater than the limit of quantitation (LOQ) (1mugkg(-1) for each isomer of DDT). Only two of the meat products were found to contain low levels of the metabolites of DDT. A number of fish and shellfish were found to contain not just the metabolites of DDT, but also parent DDT. The main contribution to DDT was from seafood. The dietary intake of DDT for an average and high secondary school student consumers were estimated to be 0.145 and 0.291mugkg(-1)bwd(-1), respectively. Both levels fell well below the Provisional Tolerable Daily Intake (PTDI) of 10mugkg(-1)bwd(-1) established by the Joint Food Agriculture Organization/World Health Organization Meeting on Pesticide Residues (JMPR). It was concluded that both the average and high secondary school student consumers were unlikely to experience major toxicological effects of DDT.     

The study of lag phase and rate improvement of TCE decay in UV/surfactant systems

The photodegradation of trichloroethene (TCE) in surfactant micelles was investigated. The decay of TCE was studied in the Rayonet RPR-200 merry-go-round photoreactor, at 253.7 nm monochromatic ultraviolet (UV) lamps, in the presence of surfactants. Surfactants are used as additional hydrogen sources to improve the photodegradation rates of TCE. About three times the rate increment is observed in the presence of Brij 35 surfactant micelles than in water alone. The increasing concentrations of H+ and Cl- indicate that they are the final products of TCE photodegradation (i.e. photodechlorination is the dominant mechanism in this system). A lag phase is observed at the beginning of the degradation, but the duration of the lag phase is apparently reduced as the initial pH increases. Because the overall decay of TCE is also found faster at higher pH levels, it is suggested that the free radical reaction is dominant at high pH levels, and the formation of lag phases is mainly due to the deficiency of free radicals at lower pH levels. The photodecomposition of TCE in surfactant micelles is also proven to be a clean and effective process. It generates no chlorinated by-products or intermediates during the process, and TCE is fully decomposed within a reasonable time.     

Tsunami run-up and inundation along the coast of Sabah and Sarawak,Malaysia due to a potential Brunei submarine mass failure

Submarine landslides, also known as submarine mass failures (SMFs), are major natural marine disasters that could critically damage coastal facilities such as nuclear power plants and oil and gas platforms. It is therefore essential to investigate submarine landslides for potential tsunami hazard assessment. Three-dimensional seismic data from offshore Brunei have revealed a giant seabed mass deposited by a previous SMF. The submarine mass extends over 120 km from the continental slope of the Baram Canyon at 200 m water depth to the deep basin floor of the Northwest Borneo Trough. A suite of in-house two-dimensional depth-averaged tsunami simulation model TUNA (Tsunami-tracking Utilities and Application) is developed to assess the vulnerability of coastal communities in Sabah and Sarawak subject to potential SMF tsunami. The submarine slide is modeled as a rigid body moving along a planar slope with the center of mass motion parallel to the planar slope and subject to external forces due to added mass, gravity, and dissipation. The nonlinear shallow water equations are utilized to simulate tsunami propagation from deepwater up to the shallow offshore areas. A wetting-drying algorithm is used when a tsunami wave reaches the shoreline to compute run up of tsunami along the shoreline. Run-up wave height and inundation maps are provided for seven densely populated locations in Sabah and Sarawak to highlight potential risks at each location, subject to two scenarios of slide slopes: 2° and 4°. The first wave may arrive at Kudat as early as 0.4 h after the SMF, giving local communities little time to evacuate. Over a small area, maximum inundated depths reaching 20.3 m at Kudat, 26.1 m at Kota Kinabalu, and 15.5 m at Miri are projected, while the maximum inundation distance of 4.86 km is expected at Miri due to its low-lying coast. In view of the vulnerability of some locations to the SMF tsunami, it is important to develop and implement community resilience program to reduce the potential damage that could be inflicted by SMF tsunamis.