The Effect of Shoreline Recreational Angling Activities on Aquatic and Riparian Habitat Within an Urban Environment: Implications for Conservation and Management

There is growing concern that recreational shoreline angling activity may negatively impact littoral and riparian habitats independent of any direct or indirect influences of fish harvest or fishing mortality through mechanisms such as disturbance (e.g., trampling, erosion) and pollution (e.g., littering). We sampled a suite of aquatic and terrestrial variables (i.e., water quality, aquatic and terrestrial macrophytes, soil compaction, anthropogenic refuse) at 14 high shoreline angling-activity sites (identified by way of interviews with conservation officers and angling clubs) within an urban area (Ottawa, Canada). For each high angling-activity site, a nearby corresponding low angling-activity site was sampled for comparison. We found that the percentage of barren area and soil compaction were greater in areas of high angling activity compared with areas that experienced relatively low angling activity. In addition, terrestrial and aquatic macrophyte density, height, and diversity were lower at high angling-activity sites. Angling- and non-angling-related litter was present in large quantities at each of the high angling-activity sites, and comparatively little litter was found at low angling-activity sites. Collectively, these findings indicate that shoreline angling does alter the riparian environment, contributing to pollution and environmental degradation in areas of high angling intensity. With growing interest in providing urban angling opportunities and in response to increasing interest in developing protected areas and parks, a better understanding of the ecologic impacts of shoreline angling is necessary to address multiuser conflicts, to develop angler outreach and educational materials, and to optimize management of angling effort to maintain ecologic integrity of riparian and aquatic ecosystems.     

Exploring the Crowding–Satisfaction Relationship in Recreational Boating

Along with the growing boating population and the number of boats in use on limited inland waterways, boater expectations of setting density, safety perceptions, and the associated impacts on their experience (e.g., satisfaction) are becoming increasingly important. The primary purpose of this article was to explore a recreational boating crowding–satisfaction model derived from previous work using safety and enjoyment as mediating variables. We also tested our crowding–satisfaction model among day and overnight users. Our analysis revealed no significant difference between day and overnight users for any of the relationships tested in our model. Our final model indicated as respondents’ expectations for seeing people increased along with their feelings of being crowded, they were more inclined to consider the conditions on the lake as being unsafe. They were also more inclined to indicate that the number of people they had seen on the lake detracted from their boating experience. Respondents’ satisfaction was tied to their perceptions of crowding. Mediating variables illustrated that the relationship was conditioned by perceptions of safety and enjoyment. Analysis of the indirect effect observed in our study illustrate that when the number of people seen on the lake exceed respondents’ expectations, their perceptions of safety and enjoyment both decline, resulting in lower satisfaction. These findings have implications for managing recreational boating use on inland lake systems. Given the role played by expectations in our model, efforts to communicate with boaters about conditions on these waterways is important for helping them plan their boating experience and avoid situations they consider unsafe or unsatisfactory.     

TRACE METALS IN SEDIMENT: SPATIAL TRENDS AND SORPTION PROCESSES1

ABSTRACT: Sediment bound trace metals are often examined for spatial trends such as downstream patterns or distance from a source. Spatial trends may indicate either differences in metal inputs, or, when considerable sediment variability exists, differences in sediment sorption processes. These two possibilities become important not only when sediment contamination is evaluated within an area, but also when regulatory agencies attempt to make equivalent among area decisions. Sediments from an urban watershed were examined for: (1) downstream trace metal trends and (2) sediment sorption relationships. Analyses determined that downstream trenda as related to metal inputs could not be recognized by analyzing the < 2mm (≤, sand) sediment size fraction. Conversely, the trace metal concentrations were found to be distinctly related to sediment characteristics. The watershed's metal concentrations are similar to those found in uncontaminated to slightly contaminated sediments in the United States.     

Fuel breaks affect nonnative species abundance in Californian plant communities.

We evaluated the abundance of nonnative plants on fuel breaks and in adjacent untreated areas to determine if fuel treatments promote the invasion of nonnative plant species. Understanding the relationship between fuel treatments and nonnative plants is becoming increasingly important as federal and state agencies are currently implementing large fuel treatment programs throughout the United States to reduce the threat of wildland fire. Our study included 24 fuel breaks located across the State of California. We found that nonnative plant abundance was over 200% higher on fuel breaks than in adjacent wildland areas. Relative nonnative cover was greater on fuel breaks constructed by bulldozers (28%) than on fuel breaks constructed by other methods (7%). Canopy cover, litter cover, and duff depth also were significantly lower on fuel breaks constructed by bulldozers, and these fuel breaks had significantly more exposed bare ground than other types of fuel breaks. There was a significant decline in relative nonnative cover with increasing distance from the fuel break, particularly in areas that had experienced more numerous fires during the past 50 years, and in areas that had been grazed. These data suggest that fuel breaks could provide establishment sites for nonnative plants, and that nonnatives may invade surrounding areas, especially after disturbances such as fire or grazing. Fuel break construction and maintenance methods that leave some overstory canopy and minimize exposure of bare ground may be less likely to promote nonnative plants.     

Limitations of the toxicity characteristic leaching procedure for providing a conservative estimate of landfilled municipal solid waste incineration ash leaching

Limitations of the toxicity characteristic leaching procedure (TCLP) for simulating pollutant leaching from wastes disposed of in full-scale landfills are well understood in the waste management profession; the TCLP solution has a lower pH and greater organic acid content than typical landfill leachate. The TCLP serves its intended regulatory objective, however, as long as a conservative estimate of leaching is provided. Here, we examine TCLP’s ability to represent worst-case leaching conditions for monofilled municipal solid waste incineration (MSWI) ash. A critical examination of TCLP’s applicability to MSWI ash is especially relevant, as ash management at MSWI facilities often centers on passing TCLP, regardless of environmental risk posed by the ash or its recyclability. Multiple batch leaching tests were conducted on different MSWI ash streams: mixed ash, fly ash, and different size fractions of bottom ash. Batch-test results were compared with leachate simulating MSWI ash monofills. The TCLP did not consistently provide the most conservative estimate of leaching, supporting the need to consider alternative methodologies in future regulatory development.

Implications: This paper analyzes the existing hazardous waste regulatory testing requirement for municipal solid waste incinerator (MSWI) ash management to evaluate whether the TCLP serves its intended purpose in providing the most conservative estimate of landfilled MSWI ash. The results will serve as guidance and motivation for policy makers and the regulatory community to reevaluate the TCLP’s application for characterizing MSWI ash leaching in certain disposal scenarios and could promote consideration of alternative testing procedures based upon results of this study. This study serves to promote representative and accurate quantification of leaching risk from MSWI ash.     

Further Development of a Specific Conductivity Approach to Measure Groundwater Discharge Area within Lakes

Groundwater exchanges with most lakes are rarely quantified because there are many technical challenges to quantification. We investigated a lakebed mapping approach to infer the relative areas of groundwater exchange in 12 prairie shallow lakes and five Laurentian mixed forest shallow lakes in Minnesota, USA in 2011. We used a relatively common approach (seepage meters) to provide baseline information on the magnitude and direction of flow at four locations in each lake. To expand from point measurements to the whole‐lake scale, we explored use of specific conductivity as a cheaper and more time efficient proxy for groundwater discharge to lakes. We validated the approach at near shore stations in each lake where seepage meter measurements and specific conductivity surveys overlapped. Specific conductivity surveys provided a similar assessment of groundwater discharge compared to seepage meters for 50% of the lake‐sampling period combinations. The lakebed mapping approach, when validated for a lake with a limited number of seepage meter (or alternative methods) measurements, offers the advantages of being more time and labor efficient over the use of a similar number of seepage meter monitoring locations; seepage meters (or piezometers, for example) are costlier in terms of equipment and labor, even for single‐lake studies. We show the combined approach could provide useful baselines for understanding and mapping groundwater exchange in shallow lakes.     

Decisions to reduce greenhouse gases from agriculture and product transport: LCA case study of organic and conventional wheat

A streamlined hybrid life cycle assessment is conducted to compare the global warming potential (GWP) and primary energy use of conventional and organic wheat production and delivery in the US. Impact differences from agricultural inputs, grain farming, and transport processes are estimated. The GWP of a 1 kg loaf of organic wheat bread is about 30 g CO₂-eq less than the conventional loaf. When organic wheat is shipped 420 km farther to market, organic and conventional wheat systems have similar impacts. These results can change dramatically depending on soil carbon accumulation and nitrous oxide emissions from the two systems. Key parameters and their variability are discussed to provide producers, wholesale and retail consumers, and policymakers metrics to align their decisions with low-carbon objectives.