Characterization of a simple bacterial consortium for effective treatment of wastewaters with reactive dyes and Cr(VI)

A microbial consortia consisting of three bacteria isolated from tanning and textile wastewaters revealed high capacity to simultaneously bioaccumulate dye and Cr(VI). The identity of the bacteria were determined by 16S rRNA gene analysis to be closely related to Ochrobactrium sp., Salmonella enterica and Pseudomonas aeruginosa. Dependence of initial pH values and range of concentrations of the dye Reactive Black B (33.2-103.1 mg l(-1)) and Cr(VI) (19.9-127.6 mg l(-1)) were examined to find the effect of pH on the dye and Cr(VI) bioaccumulation. Optimal pH for growth of the consortia in media containing 35 mg l(-1) dye and 50 mg l(-1) Cr(VI) was determined to be around 8. The Cr(VI) bioaccumulation by the consortia was rapid in media containing molasses with or without reactive dye with a maximum Cr(VI) bioaccumulation yield ranging from 90% to 99% within a 2-4d period. A slightly lower yield for the dye bioaccumulation was measured with a maximum dye bioaccumulation of 80% at 59.3 mg l(-1) dye and 69.8 mg l(-1) Cr(VI). The highest specific Cr uptake value was obtained as 76.7 mg g(-1) at 117.1 mg l(-1) Cr(VI) and 50.8 mg l(-1) dye concentration. This ability to bioaccumulate dye and Cr(VI) was more efficient than the enriched sludge from which they were isolated.     

Nontarget screening using passive air and water sampling with a level Ⅱ fugacity model to identify unregulated environmental contaminants

It is thought that there are many unregulated anthropogenic chemicals in the environment.For risk assessment of chemicals, it is essential to estimate the predicted environmental concentrations. As an effort of identifying residual organic contaminants in air and water in Korea, nontarget screening using two-dimensional gas chromatography time-of-flight mass spectrometry(GC × GC-TOFMS) was conducted at 10 sites using polyurethane foam passive air sampler and at 6 sites using polydimethyl siloxane(PDMS) passive water sampler in three different seasons in 2014. More than 600 chemical peaks were identified satisfying the identification criteria in air and water samples, respectively, providing a list for further investigation. Chemical substances with reported national emission rates in2014(n = 149) were also screened for potential existence in the environment using a level Ⅱ fugacity model. Most of chemical substances classified as not detectable were not identified with detection frequency greater than 20% by nontarget screening, indicating that a simple equilibrium model has a strong potential to be used to exclude chemicals that are not likely to remain in the environment after emissions from targeted monitoring.     

Re-emergence of a GII.4 Norovirus Sydney 2012 Variant Equipped with GII.P16 RdRp and Its Predominance over Novel Variants of GII.17 in South Korea in 2016

Noroviruses are major causative pathogen of nonbacterial acute gastroenteritis worldwide. Of the seven genogroups of noroviruses suggested recently, genogroup II genotype 4 (GII.4) had been the most common genotype identified in hospitalized patients in the last few decades. However, since the latter half of 2014, new variants of GII.17 have been reported as the main causes of outbreaks over GII.4 in East Asia and have also occurred in America and Europe. In this study, we monitored norovirus GII in coastal streams at South Gyeongsang province and South Jeolla province of South Korea from March 2015 to May 2016. Norovirus GII.17 capsid sequences were predominantly detected until September 2015 in water samples. However, we found that the number of positive cases of the norovirus GII.4 Sydney 2012 capsid sequence has been increasing since December 2015, overtaking that of GII.17 in 2016. The RdRp genotype of this predominant GII.4 variant in 2016 was identified as GII.P16. The emergence and predominance of the GII.4 pandemic capsid sequence harboring a different RdRp genotype suggested the potential for a future pandemic.     

Ozone influence on native vegetation in the Jizerske hory Mts. of the Czech Republic: results based on ozone exposure and ozone-induced visible symptoms

Ozone levels in the Jizerske hory Mts. measured at 13 sites by diffusive samplers during the 2006 and 2007 vegetation seasons are presented. A significant ozone gradient (5.4 ppb in 2006 and 4.0 ppb in 2007) per 100 m difference in altitude between 370 and 1,100 m a.s.l. was recorded. High-resolution maps of phytotoxic potential were developed. The AOT40 threshold (5 ppm h) was exceeded over the entire area with the highest levels exceeding this threshold by 12 times in the upper portions of the mountains. Ozone visible injury was evaluated at four of the monitoring sites on seven native plant and tree species. Four species showed ozone-like symptoms, two of which (Rubus idaeus and Fagus sylvatica) were confirmed as ozone-induced. Our results indicate that ambient ozone is likely to have a much lower impact on the Jizerske hory Mts. vegetation than expected, considering the measured ambient ozone exposures and favourable environmental conditions for ozone uptake.     

Distribution of polychlorinated biphenyls and organochlorine pesticides in wild mussels from two different sites in central Croatian Adriatic coast

Levels of 24 organochlorine compounds were investigated in wild mussels collected at two locations (Krka estuary and Ka?tela Bay) on the Croatian Adriatic coast in 2003, 2005, 2006, 2007, and 2008. PCB and OCP ranges found at the two locations overlapped and followed similar profiles despite the differences between the two locations indicating that they share a common pollutants source. Among organochlorine pesticides, the dominant compound was DDT. Among indicator PCBs, the dominant compound was PCB-153, while PCB-118 was dominant among the remaining 11 congeners. Generally, the sum of six indicator PCBs was constantly greater than the sum of 11 congeners at both locations. α-HCH/γ-HCH and DDE/DDT ratios were below 1, indicating recent input of γ-HCH and DDT into the marine environment. In the investigated period, almost all organochlorine compounds reached the highest values in 2006. The levels of PCBs and OCPs in this study were considerably below the Croatian maximum permissible levels, confirming that they do not pose any threat for human health.     

An 'artificial mussel' for monitoring heavy metals in marine environments

A new chemical sampling device, artificial mussel (AM), has been developed for monitoring metals in marine environments. This device consists of a polymer ligand suspended in artificial seawater within a Perspex tubing, and enclosed with semi-permeable gel at both ends. Laboratory and field experiments were carried out to examine the uptake of five metals (Cd, Cr, Cu, Pb and Zn) by the AM. Uptake of metals by AM was proportional to the exposure metal concentrations, and the AM was able to accumulate the ASV labile fractions of metals. Uptake and release of the metals of AM are similar to those of the mussel Perna viridis, but less affected by salinity and temperature. Field studies demonstrated that the AM can not only provide a time-integrated estimate of metals concentrations, but also allows comparisons of metal levels in different environments and geographical areas beyond the natural distribution limits of biomonitors.     

Gene expression analysis and classification of mode of toxicity of polycyclic aromatic hydrocarbons (PAHs) in Escherichia coli

Escherichia coli is known to respond to certain toxic chemicals through an increased expression of various stress genes. In this study, therefore, the expression of recA, katG, fabA and grpE genes was used as a representative for DNA, oxidative, membrane and protein damage, respectively, after E. coli was exposed to different polycyclic aromatic hydrocarbons (PAHs), i.e., phenanthrene, naphthalene and benzo[a]pyrene. To accomplish this, the expression levels of these four genes were quantified using a real-time RT-PCR analysis when E. coli cultures were under stressful conditions, such as those caused by an exposure to mitomycin C, hydrogen peroxide and phenol. It was found that the primary toxic effect of each chemical is clearly seen when the expression levels of the different genes are compared. Tests with the PAHs showed naphthalene and benzo[a]pyrene to be genotoxic, while phenanthrene had no clear effect on the expression of any of these genes. Based on these results, the effects due to these toxic chemicals and the extent of each stress can be evaluated with ease using the expression levels of different stress responsive genes.     

Study on photocatalytic degradation of gaseous dichloromethane using pure and iron ion-doped TiO2 prepared by the sol-gel method

The synthesis of TiO₂ and Fe–TiO₂ by sol–gel method is demonstrated and characterized. The characterization of TiO₂ and Fe–TiO₂ is performed with instruments, including TGA/DTA, FTIR, UV–Vis, N₂ adsorption and SEM. Dichloromethane is used for the photocatalytic activity test. From the results of dichloromethane photocatalyitc degradation, the calcined temperature of TiO₂ and the presence of water vapor influence the photocatalytic activity. The optimum doping amount of iron ions is 0.005 mol%, and this can enhance the photocatalytic activity, while too great an amount will make the iron ions become recombination centers for the electron–hole pairs and reduce the photocatalytic activity. UV–Vis diffuse reflectance spectra of Fe–TiO₂ show an increase in absorbency in the visible light region with the increase in iron ions doping concentration The intermediate of dichloromethane photodegradation includes CHCl₃, CCl₄, CH₂Cl₂ and COCl₂. The presence of iron ions may reduce the adsorption of Cl element on the surface of the photocatalyst.     

Emission of particulate and gaseous pollutants from household laser processing machine

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration (PNC) and particle emission rate (PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 mW, the mode diameters of particles were <150 nm, and PNCs were >2.0 × 10⁴ particles/cm³. Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C₈ aromatics (ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles (UFPs) was >5 × 10⁴ particles/cm³ during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.     

A study on torrefaction characteristics of waste sawdust in an auger type pyrolyzer

Torrefaction is thermo-chemical process which can improve solid fuel quality as well as grindability. In previous studies, torrefaction has been studied mainly for removal of moisture and for improving grindability. In this experiment, the characteristics of torrefied waste sawdust were studied especially for its energy yield. Hence, torrefaction was performed on varying reaction temperatures (200, 220, 240, 260, 280, 300 °C) and solid residence time (10, 30, 60 min). The results indicated that the yield of torrefaction decreases with increasing temperature and residence time. It was found that above 280 °C, the yield got remarkably decreased. The lowest yield was obtained at the residence time of 60 min. It was also noticed that the HHV of torrefied samples increases with increasing temperature. The highest HHV was found to be 26.09 MJ/kg which was obtained at 60 min and 300 °C. However, the highest energy yield was obtained to be 104.17 % which was noticed at 30 min and 260 °C.