Do tailings from the Mariana,MG (Brazil), disaster affect the initial development of millet,maize, and sorghum?

Environmental Science and Pollution Research - The collapse of the Fundão dam in Mariana, MG, in 2015 resulted in the overflow of more than 50 million m3 of mud containing mine tailings,...     

Potential re-colonisation by cladocerans of an acidic tropical pond

To predict how re-colonisation of acidified lakes will proceed, at least two approaches are possible: (i) to compare the life history traits of candidate species and determine which one has the highest fitness, and (ii) to simulate a more realistic scenario carrying out experiments with the grouping of the candidate species, so that the intrinsic rate of natural increase of each species is integrated with its sensitivity to low pH and its ability to compete with the other candidate populations. The objective of the present study was to investigate the future re-colonisation of such acidified systems, taking as case-study a tropical pond (Lagoa das Dunas, Camaçari, BA, Brazil) and four species of cladocerans occurring in nearby water bodies (Ceriodaphniacornuta, Ceriodaphniasilvestrii, Latonopsisaustralis and Macrothrix elegans), by comparing the two above mentioned approaches. The second approach included two sets of in situ microcosms experiments, one simulating the re-colonisation by immigrating ephippia, thus using neonates of each species as colonisers, and another simulating the immigration of adults. Both these simulations followed nearly the same trends. The integration of the effects of a higher temperature, a different photoperiod and species competition determined differences in the species densities ranking between the two approaches: life history versus microcosms. The densities of C.cornuta in the microcosms matched the biphasic concentration/response hormetic model, in the simultaneous presence of two increasingly intense stressors (interspecific competition and acidity), with a low-dose stimulation and a high-dose inhibition. The present study provided, thus, a further support to the acceptance of hormesis in ecotoxicology, also at the population level in multispecies experiments.     

Assessing the diurnal variability of pharmaceutical and personal care products in a full-scale activated sludge plant

An intensive sampling campaign has been carried out in a municipal wastewater treatment plant (WWTP) to assess the dynamics of the influent pharmaceutical active compounds (PhAC) and musks. The mass loadings of these compounds in wastewater influents displayed contrasting diurnal variations depending on the compound. The musks and some groups of PhACs tended to follow a similar diurnal trend as compared to macropollutants, while the majority of PhACs followed either the opposite trend or no repeatable trend. The total musk loading to the WWTP was 0.74 ± 0.25 g d⁻¹, whereas the total PhAC mass loading was 84.7 ± 63.8 g d⁻¹. Unlike the PhACs, the musks displayed a high repeatability from one sampling day to the next. The range of PhAC loadings in the influent to WWTPs can vary several orders of magnitude from one day or week to the next, representing a challenge in obtaining data for steady-state modelling purposes.     

Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions

Two combustion tests were performed in a fluidized bed combustor of a thermo-electric power plant: (1) combustion of coal; (2) co-combustion of coal (68.7% w/w), sewage sludge (9.2% w/w) and meat and bone meal (MBM) (22.1% w/w). Three samples of ashes (bottom, circulating and fly ashes) were collected in each combustion test. The ashes were submitted to the following assays: (a) evaluation of the leaching behaviour; (b) stabilization/solidification of fly ashes and evaluation of the leaching behaviour of the stabilized/solidified (s/s) materials; (c) production of concrete from bottom and circulating ashes. The eluates of all materials were submitted to chemical and ecotoxicological characterizations. The crude ashes have shown similar chemical and ecotoxicological properties. The s/s materials have presented compressive strengths between 25 and 40 MPa, low emission levels of metals through leaching and were classified as non-hazardous materials. The formulations of concrete have presented compressive strengths between 12 and 24 MPa. According to the Dutch Building Materials Decree, some concrete formulations can be used in both scenarios of limited moistening and without insulation, and with permanent moistening and with insulation.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Influence of the current density on the electrochemical treatment of concentrated 1-butyl-3-methylimidazolium chloride solutions on diamond electrodes

This paper focuses on the influence of the current density treatment of a concentrated 1-butyl-3-methylimidazolium chloride (BMImCl) solution on an electrochemical reactor with a boron-doped diamond (BDD) anode. The decrease in the total organic carbon (TOC) and the BMImCl concentration demonstrate the capability of BDD in oxidizing ionic liquids (ILs) and further mineralizing (to CO₂ and NO₃ ^?) more rapidly at higher current densities in spite of the reduced current efficiency of the process. Moreover, the presence of Cl^? led to the formation of oxychlorinated anions (mostly ClO₃ ^? and ClO₄ ^?) and, in combination with the ammonia generated in the cathode from the nitrate reduction, chloramines, more intensely at higher current density. Finally, the analysis of the intermediates formed revealed no apparent influence of the current density on the BMImCl degradation mechanism. The current density presents therefore a complex influence on the IL treatment process that is discussed throughout this paper.     

Experimental study on the survival of the water hyacinth (Eichhornia crassipes (Mart.) Solms—Pontederiaceae) under different oil doses and times of exposure

In the last decades, petroleum activities have increased in the Brazilian Amazon where there is oil exploration on the Urucu River, a tributary of the Amazon River, about 600 km from the city of Manaus. Particularly, transportation via the Amazon River to reach the oil refinery in Manaus may compromise the integrity of the large floodplains that flank hundreds of kilometers of this major river. In the Amazon floodplains, plant growth and nutrient cycling are related to the flood pulse. When oil spills occur, floating oil on the water surface is dispersed through wind and wave action in the littoral region, thus affecting the vegetation of terrestrial and aquatic environments. If pollutants enter the system, they are absorbed by plants and distributed in the food chain via plant consumption, mortality, and decomposition. The effect of oil on the growth and survival of vegetation in these environments is virtually unknown. The water hyacinth [Eichhornia crassipes (Mart.) Solms] has a pantropical distribution but is native to the Amazon, often growing in high-density populations in the floodplains where it plays an important role as shelter and food source for aquatic and terrestrial biota. The species is well known for its high capacity to absorb and tolerate high levels of heavy metal ions. To study the survival and response of water hyacinth under six different oil doses, ranging from 0 to 150 ml l^?1, and five exposure times (1, 5, 10, 15, and 20 days), young individuals distributed in a completely randomized design experiment composed of vessels with a single individual each were followed over a 50-day period (30-day acclimatization, 20 days under oil treatments). Growth parameters, biomass, visual changes in the plants, and pH were recorded at 1, 5, 10, 15, and 20 days. Increasing the time of oil exposure caused a decrease in biomass, ratio of live/dead biomass and length of leaves, and an increase in the number of dead leaves. Dose of oil and time of exposure are the most important factors controlling the effects of petroleum hydrocarbons on E. crassipes. Although the species is able to survive exposure to a moderate dose of oil, below 75 ml l^?1 for only 5 days, severe alterations in plant growth and high mortality were observed. Therefore, we conclude that Urucu oil heavily affects E. crassipes despite its known resistance to many pollutants.     

Evaluation of diffusive gradients in thin films technique (DGT) for measuring Al, Cd, Co, Cu, Mn, Ni, and Zn in Amazonian rivers

Studies concerning the lability and bioavailability of trace metals have played a prominent role in the search for contamination of water resources. This work describes the first application yet of the diffusive gradients in thin films technique (DGT) to the determination of the fraction of free plus labile metals in waters from the Amazon Basin. Due to the complexity of the use of DGT for samples with low ionic strength and high organic matter content (characteristic of Amazonian rivers), a new analytical procedure was developed. The method is based on the determinations of apparent diffusion coefficients (D_ap) in the laboratory, by performing deployments in samples collected in the corresponding sites of study. The D_ap thereby determined is then used for in situ measurements. The suitability of the proposed approach for determination of labile Al, Cd, Co, Cu, Mn, Ni, and Zn in the Amazon River and Rio Negro (English: Black River) was evaluated. Except for Co, Mn (in a deployment at Rio Negro), Ni and Zn (in a deployment at Amazon River), labile in situ measurements were lower or similar to dissolved concentrations, indicating suitability of the proposed approach.     

Cadmium background concentrations to establish reference quality values for soils of São Paulo State,Brazil

Proper assessment of soil cadmium (Cd) concentrations is essential to establish legislative limits. The present study aimed to assess background Cd concentrations in soils from the state of São Paulo, Brazil, and to correlate such concentrations with several soil attributes. The topsoil samples (n?=?191) were assessed for total Cd contents and for other metals using the USEPA 3051A method. The background concentration was determined according to the third quartile (75th). Principal component analysis, Spearman correlation, and multiple regressions between Cd contents and other soil attributes (pH, cation exchange capacity (CEC), clay content, sum of bases, organic matter, and total Fe, Al, Zn, and Pb levels) were performed. The mean Cd concentration of all 191 samples was 0.4 mg kg^?1, and the background concentration was 0.5 mg kg^?1. After the samples were grouped by parent material (rock origin) and soil type, the background Cd content varied, i.e., soils from igneous, metamorphic, and sedimentary rocks harbored 1.5, 0.4, and 0.2 mg kg^?1 of Cd, respectively. The background Cd content in Oxisols (0.8 mg kg^?1) was higher than in Ultisols (0.3 mg kg^?1). Multiple regression demonstrated that Fe was primarily attributed to the natural Cd contents in the soils (R ²?=?0.79). Instead of a single Cd background concentration value representing all São Paulo soils, we propose that the concentrations should be specific for at least Oxisols and Ultisols, which are the primary soil types.