环磷酰胺等三种化学物诱发褐斑大蠊染色体畸变分析

染色体的畸变分析是一种简便易行,经济的遗传毒理学方法,可用来探讨诱变物对生物遗传系统的影响。目前人们多利用鼠类、赤麂及人的培养细胞来进行染色体畸变分析,其它材料很少见,蜚蠊(俗称蟑螂)是一种重要的卫生昆虫,也是一种较好的遗传学研究材料,其分布广泛,与人的日常生活环境密切相关,能否利用它作为一种污染的监测因子呢?我们利用褐斑大蠊(Periplaneta brunnea,Burmeister 1838)进行了初步尝试。     

脂多糖诱发生物体内合成NO_2~－和胺类化合物的研究

脂多糖诱发生物体内合成ＮＯ_２~－和胺类化合物的研究宋秀贤，赵海涛，金秀兰许后效，林继红，陆德培（中国科学院生态环境研究中心，北京，１０００８５）关键词亚硝酸根；胺类化合物；生物合成；脂多糖．一些研究已经证明Ｎ－亚硝基化合物（ＮＯＣ）对动物存在致癌性￣...     

一种新型烟气脱硫技术在燃煤锅炉上的扩大试验

介绍了用硫化碱加TFS添加剂进行燃煤锅炉煤气脱硫并副产硫代硫酸钠的中试成果。     

Transport modeling of copper and cadmium with linear and nonlinear retardation factors

The predictive accuracy of using the one-dimensional advection–dispersion equation to evaluate the fate and transport of solute in a soil column is usually dependent on the proper determination of chemical retardation factors. Typically, the distribution coefficient (K_d) obtained by fitting the linear sorption isotherm has been extensively used to consider general geochemical reactions on solute transport in a low-concentration range. However, the linear distribution coefficient cannot be adequately utilized to describe the solute fate at a higher concentration level. This study employed the nonlinear equilibrium-controlled sorption parameters to determine the retardation factor used in column leaching experiments. Copper and cadmium transportation in a lateritic silty-clay soil column was examined. Through the explicit finite-difference calculations with a third-order total-variation-diminishing (TVD) numerical solution scheme, all results of the theoretical copper and cadmium breakthrough curves (BTCs) simulated by using the Freundlich nonlinear retardation factors revealed good agreement with the experimental observations.     

Determination of source contributions to ambient PM2.5 in Kaohsiung, Taiwan, using a receptor model

Ambient particulates of PM2.5 were sampled at three sites in Kaohsiung, Taiwan, during February and March 1999. In addition, resuspended PM2.5 collected from traffic tunnels, paved roads, fly ash of a municipal solid waste (MSW) incinerator, and seawater was obtained. All the samples were analyzed for twenty constituents, including water-soluble ions, organic carbon (OC), elemental carbon (EC), and metallic elements. In conjunction with local source profiles and the source profiles in the model library SPECIATE EPA, the receptor model based on chemical mass balance (CMB) was then applied to determine the source contributions to ambient PM2.5. The mean concentration of ambient PM2.5 was 42.69-53.68 micrograms/m3 for the sampling period. The abundant species in ambient PM2.5 in the mass fraction for three sites were OC (12.7-14.2%), SO4(2-) (12.8-15.1%), NO3- (8.1-10.3%), NH4+ (6.7-7.5%), and EC (5.3-8.5%). Results of CMB modeling show that major pollution sources for ambient PM2.5 are traffic exhaust (18-54%), secondary aerosols (30-41% from SO4(2-) and NO3-), and outdoor burning of agriculture wastes (13-17%).     

Heavy metal retention and partitioning in a large-scale soil-aquifer treatment (SAT) system used for wastewater reclamation

Soil aquifer treatment (SAT) of wastewater relies on extensive biogeochemical processes in the soil and aquifer to achieve large-scale and economic reclamation of municipal effluents. Removal of trace metals from the wastewater is a prime objective in the operation, but the long-term sustainability of the adsorptive filtration capacity of the soils is an open question. Solid/solution partitioning (measured by the distribution coefficient, K(d)) and solid/solid partitioning (measured by selective sequential dissolution, SSD) of heavy metals were measured in soils sampled from active recharge basins in a wastewater reclamation plant and were compared to the adjacent pristine dune. K(d) values for the adsorption of Cu, Ni and Zn, measured in short-term adsorption experiments positively and significantly correlated with solution pH. Quantitative estimation of Cu, Ni and Zn adsorption on multi-sorbents indicated that surface adsorption and precipitation on Fe oxides and/or carbonate may be the major mechanisms of metal retention in these soils. SSD analyses of metal partitioning in soils exposed to approximately 20yr of effluent recharge showed that all solid-phase components, including the most stable 'residual' component, competed for and retained added Cu and Zn. Copper preferentially partitioned into the oxide component (32.0% of the soil-accumulated metal) while Zn preferentially partitioned into the carbonate component (51.6% of the soil-accumulated metal).     

水解酸化-缺氧法处理采油废水的污染物迁移降解试验研究

水解酸化．缺氧法对采油废水有较好的处理效果，采用GC／MS技术对水解酸化-缺氧法处理采油废水过程中污染物的迁移降解进行的研究表明：水解酸化段和缺氧段对采油废水中碳原子为C6-C9、分子量为100—140的有机物均有较好的降解能力。其中，在水解酸化段中酮类、芳烃得到较好的降解，缺氧段中酚类和醚类化合物降解明显。水解酸化-缺氧工艺对于采油废水中的甲苯和二甲苯具有较好的降解能力。     

臭氧-曝气生物滤池处理酸性玫瑰红染料废水

在实验室配制含酸性玫瑰红染料的印染废水，采用臭氧氧化-曝气生物滤池工艺开展处理试验。试验运行结果表明，臭氧氧化处理能提高模拟废水的可生化性，BOD／COD值由原水的0．18上升到0．36。经组合工艺处理后出水COD〈40mg／L，色度40倍以下，SS约50mg／L，处理效果良好。     

低COD浓度废水启动EGSB反应器

以厌氧活性污泥和好氧活性污泥接种于2个膨胀颗粒污泥床(EGSB)反应器中,进水流量为10 mL/min,回流量为180 mL/min,进水COD浓度在180 mg/L左右,有机负荷率(OLR)为1.728 kg COD/m3·d左右,污泥负荷率(SLR)为0.19 kg COD/kg MLSS·d左右,出水COD浓度维持在40mg/L左右,COD去除率达80%以上.控制温度在32～35 ℃,pH在6.8～7.2,反应器内氧化还原电位在-340 mV以下,水力停留时间(HRT)4.2 h,上升流速4.86 m/h以及加入80 mg/L絮凝剂(硫酸铝钾),缩短了启动时间,促进了颗粒污泥的形成.分别经过60 d和120 d运行,反应器启动成功.结果表明,上升流速、絮凝剂和污泥类型对颗粒污泥的形成有影响;接种好氧活性污泥在低浓度COD下,合理控制负荷速率能成功启动EGSB反应器.     

气液相组合生物法净化低浓度甲醛废气研究

对生物膜填料塔 液相生物处理的组合系统净化低浓度甲醛废气进行实验研究,结果表明,组合系统对甲醛废气的净化效果明显优于单独生物膜填料塔净化系统,甲醛净化效率提高35%以上,甲醛生化去除量增大50%以上.动力学研究结果表明,甲醛在生物膜上的生化降解反应为慢速生化反应,需要采取强化甲醛液相生化降解反应、提高反应速率的措施,来提高废气中甲醛的生物净化效果.