Characterization of pollutants in Florida street sweepings for management and reuse

Disposal and beneficial-use options for street sweeping residuals collected as part of routine roadway maintenance activities in Florida, USA, were assessed by characterizing approximately 200 samples collected from 20 municipalities. Total concentrations (mg/kg or μg/kg) and leachable concentrations (mg/L or μg/L) of 11 metals and a number of organic pollutant groups (volatile organics, semi-volatile organics, pesticides, herbicides, carbamates) in the samples were measured. The synthetic precipitation leaching procedure (SPLP) was performed to evaluate the leachability of the pollutants. From the total metal analysis, several metals (e.g., arsenic, barium, chromium, copper, nickel, lead, and zinc) were commonly found above their detection limits. Zinc was found to have the highest mean concentration of all metals measured (46.7 mg/kg), followed by copper (10.7 mg/kg) and barium (10.5 mg/kg). The metal with the smallest mean concentration was arsenic (0.48 mg/kg). A small fraction of the total arsenic, barium, lead, and zinc leached in some samples using the SPLP; leached concentrations were relatively low. A few organic compounds (e.g., 4,4′-DDT, endrin, and endosulfan II) were detected in a limited number of samples. When the total and leaching results were compared to risk-based Florida soil cleanup target levels and groundwater cleanup target levels, the street sweepings were not found to pose a significant human-health risk via direct exposure or groundwater contamination.     

Source attribution for mercury deposition in the contiguous United States: regional difference and seasonal variation

Quantifying the contribution of emission sources responsible for mercury deposition in specific receptor regions helps develop emission control strategies that alleviate the impact on ecosystem and human health. In light of the maximum available control technology (MACT) rules proposed by U.S. Environmental Protection Agency (EPA) and the ongoing intergovernmental negotiation coordinated by United Nations Environmental Programme (UNEP) for mercury, the Community Multiscale Air Quality Modeling System (CMAQ-Hg) was applied to estimate the source contribution in six subregions of the contiguous United States (CONUS). The considered source categories include electric generating units (EGU), iron and steel industry (IRST), other industrial point sources excluding EGU and IRST (OIPM), the remaining anthropogenic sources (RA), natural processes (NAT), and out-of-boundary transport (BC). It is found that, on an annual basis, dry deposition accounts for two-thirds of total annual deposition in CONUS (474 Mg yr(-1)), mainly contributed by reactive gaseous mercury (about 60% of total deposition). The contribution from large point sources can be as high as 75% near the emission sources (< 100 km), indicating that emission reduction may result in direct deposition decrease near the source locations. Out-of-boundary transport contributes from 68% (Northeast) to 91% (West Central) of total deposition. Excluding the contribution from out-of boundary transport, EGU contributes to about 50% of deposition in the Northeast, Southeast, and East Central regions, whereas emissions from natural processes are more important in the Pacific and West Central regions (contributing up to 40% of deposition). This suggests that the implementation of the new EPA MACT standards will significantly benefit only these three regions. Emission speciation is a key factor for local deposition. The source contribution exhibits strong seasonal variation. Deposition is greater in warm seasons due to stronger Hg0 oxidation. However, the contribution from anthropogenic sources is smaller in warm seasons because of larger emissions from natural processes and stronger vertical mixing that facilitates transport.     

Evaluation of environmental impacts of food waste management by material flow analysis (MFA) and life cycle assessment (LCA)

This paper focuses on the evaluation of potential environmental impacts of food waste management practices by material flow analysis (MFA) and life cycle assessment (LCA) during different life cycle stages toward the environmentally sustainable options for Daejeon Metropolitan City (DMC) in Korea. The MFA and LCA studies were conducted to examine different recycling facilities of food waste. The results of the LCA study indicate that, among the different recycling methodologies currently in practice in DMC, Scenario 4 (wet and dry feed site) conduced to higher global warming potential (GWP) and higher acidification potential (AP), whereas Scenarios 2 (wet feed site 1) and 3 (wet feed site 2) resulted in the lowest impact. This is mainly due to the emission caused during the treatment stage. For eutrophication potential (EP), Scenario 1 (composting site) contributed to higher environmental impacts due to the emission of ammonia generated during the treatment process, while in case of photochemical ozone creation potential (POCP), the collection stage for all recycling facilities led to higher impacts to the environment due to the combustion of fossil fuels. This study indicates that the proper disposal of the final residues, such as solid sludge and screened materials, could aid in reducing environmental burdens.     

Efforts to develop regulations in Korea similar to the US maximum achievable control technology (MACT) regulations for hazardous waste incinerators

The development of regulations patterned after the United States’ requirement for maximum achievable control technology (MACT) to control hazardous air pollutants from major industrial sources in Korea is in progress. Current management practices and installed air pollution control devices were surveyed; emission tests and continuous emission data collected from facilities under operation were assessed considering other MACT requirements such as reporting, report keeping requirements. Emission sampling and air pollutant analysis were carried out at representative hazardous waste incinerators installed with wet-type and dry-type air pollution control devices. Korean and United States Environmental Protection Agency methods were used for sampling and analysis. The major heavy metals emitted were Zn, Ni, Pb, and Cr. The heavy metal removal efficiency of existing air pollution control devices was greater than 99%. The average mercury removal efficiency was more than 30%. Toluene; m,p-xylene; o-xylene; benzene; dichloromethane; styrene; ethylbenzene; 1,3-dichlorobenzene; and 1,2,4-trimethylbenzene were the major volatile organic compounds emitted. The emissions from field tests were compared, reviewed, and analyzed with respect to MACT regulations to check applicability. Finally, draft guidelines were suggested for effective hazardous air pollutant management in Korea.     

Comparison of morphological defences in asexually and sexually reproduced eggs of Daphnia (D. galeata and D. similis) against fish kairomones

In the present study, we investigated morphological changes of hatchlings from asexually and sexually produced eggs of Daphnia galeata and D. similis against fish kairomones. In both species, hatchlings from asexual eggs showed induced traits, such as short body length, long tail spine and high relative tail spine length when influenced by fish kairomones. However, hatchlings from sexual eggs expressed high relative tail spine length regardless of kairomones presence. The results showed that the inducibility of morphological defences depends on the egg type, with inducible defences predominant in asexual eggs while fixed defences are employed by the offspring of sexual eggs in Daphnia.     

Isolation and characterization of an Alcaligenes sp. strain DG-5 capable of degrading DDTs under aerobic conditions

In this study, an Alcaligenes sp. strain DG-5 that can effectively degrade dichlorodiphenyltrichloro-ethanes (DDTs) under aerobic conditions was isolated from DDTs-contaminated sediment. Various factors that affect the biodegradation of DDTs by DG-5 were investigated. About 88 %, 65 % and 45 % of the total DDTs were consumed within 120 h when their initial concentrations were 0.5, 5 and 15 mg L?1, respectively. However, almost no degradation was observed when their concentration was increased to 30 mg L?1, but the addition of nutrients significantly improved the degradation, and 66 % and 90 % of the total DDTs were degraded at 336 h in the presence of 5 g L?1 peptone and yeast extract, respectively. Moreover, the addition of 20 mM formate also enhanced the ability of DG-5 to transform DDTs, and its DDT transformation capacity (T(c)) value was increased by 1.8 - 2.7 fold for the pure (p,p'-DDT or o,p'-DDT only) and mixed systems (p,p'-DDT, o,p'-DDT, p,p'-DDD and p,p'-DDE). Furthermore, it was found that competitive inhibition in the biodegradation by DDT compounds occurred in the mixed system.     

Design and demonstration of a next-generation air quality attainment assessment system for PM2.5 and O3

Due to the increasingly stringent standards, it is important to assess whether the proposed emission reduction will result in ambient concentrations that meet the standards. The Software for Model Attainment Test—Community Edition (SMAT-CE) is developed for demonstrating attainment of air quality standards of O₃ and PM_2.5. SMAT-CE improves computational efficiency and provides a number of advanced visualization and analytical functionalities on an integrated GIS platform. SMAT-CE incorporates historical measurements of air quality parameters and simulated air pollutant concentrations under a number of emission inventory scenarios to project the level of compliance to air quality standards in a targeted future year. An application case study of the software based on the U.S. National Ambient Air Quality Standards (NAAQS) shows that SMAT-CE is capable of demonstrating the air quality attainment of annual PM_2.5 and 8-hour O₃ for a proposed emission control policy.     

Design and demonstration of a next-generation air quality attainment assessment system for PM2.5 and O3

Due to the increasingly stringent standards, it is important to assess whether the proposed emission reduction will result in ambient concentrations that meet the standards. The Software for Model Attainment Test—Community Edition (SMAT-CE) is developed for demonstrating attainment of air quality standards of O₃ and PM_2.5. SMAT-CE improves computational efficiency and provides a number of advanced visualization and analytical functionalities on an integrated GIS platform. SMAT-CE incorporates historical measurements of air quality parameters and simulated air pollutant concentrations under a number of emission inventory scenarios to project the level of compliance to air quality standards in a targeted future year. An application case study of the software based on the U.S. National Ambient Air Quality Standards (NAAQS) shows that SMAT-CE is capable of demonstrating the air quality attainment of annual PM_2.5 and 8-hour O₃ for a proposed emission control policy.     

Development and case study of a science-based software platform to support policy making on air quality

This article describes the development and implementations of a novel software platform that supports real-time, science-based policy making on air quality through a user-friendly interface. The software, RSM-VAT, uses a response surface modeling (RSM) methodology and serves as a visualization and analysis tool (VAT) for three-dimensional air quality data obtained by atmospheric models. The software features a number of powerful and intuitive data visualization functions for illustrating the complex nonlinear relationship between emission reductions and air quality benefits. The case study of contiguous U.S. demonstrates that the enhanced RSM-VAT is capable of reproducing the air quality model results with Normalized Mean Bias < 2% and assisting in air quality policy making in near real time.