Levels of black carbon and their relationship with particle number levels—observation at an urban roadside in Taipei City

Information on the relationship between black carbon (BC) and particle number levels in urban areas is limited. Therefore, investigating the relationship between BC and particle number levels in different particle size ranges at an urban area is worthwhile. This study used an aethalometer and scanning mobility particle sizer to measure the levels of BC and particle number simultaneously at an urban roadside in Taipei City. Measurement results show that hourly BC levels are 0.62–8.80 μg m^?3 (mean?=?3.50 μg m^?3) and hourly particle number levels are 4.21?×?10³–4.64?×?10⁴ particles cm^?3 (mean?=?2.00?×?10⁴ particles cm^?3) in Taipei urban area. The BC and particle number levels peak during morning (7:00–9:00) and evening (16:00–18:00) rush hours on weekdays. Low BC and particle number levels exist in the early morning hours. Time variations in BC levels are the same as those of particle number levels in this study, clearly indicating that BC and particles are likely released from the same emission source. Additionally, BC levels in the urban area are more strongly associated with ultrafine particle levels than with total particle number levels, particularly in the size range of 56–180 nm. According to measurement results, most BC in aerosols in urban areas can be in the ultrafine size range.     

Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method

While the innovativeness and market potential of a new product is normally emphasized, its environmental impact is often neglected. Despite their ability to help designers reduce the environmental impact of products throughout their life cycle, many eco-design methods focus on the redesign of existing products, necessitating a more innovative design capacity. This work describes a novel model to accelerate the preliminary eco-innovation product design by integrating the advantages of case-based reasoning and the TRIZ method. Previous cases from a database support a novel design to satisfy functional performances under the CBR framework. The innovative principles and evolution patterns of the TRIZ method can enhance the design level of new products to achieve eco-innovation. Four eco-innovation concepts for a PC mouse demonstrate the effectiveness of the proposed model.     

采场通风方式与瓦斯运移规律研究

采场是煤矿生产的核心地带,而采场通风系统是确保采场作业安全,创造良好生产环境的重要环节。本文以采场风流流动及瓦斯运移理论为基础,通过现场试验、模型模拟试验及计算机模拟研究等方法,着重研究了中国常用的和有发展前途的走向长壁后退式U型通风方式、U+L型通曲方式、后退式Y型通风方式条件下采场风流流动及瓦斯运移规律。     

电旋风除尘模型实验研究

本研究试图将电除尘器与旋风除尘器组合为一体,以求取得较高的除尘效率,并利用旋转气流实现自动清灰。本文介绍了切向进气直流式电旋风除尘的模型试验,通过实测不同工况下的除尘效率和压力损失,应用经典除尘理论,建立了相应的数学模型。     

建设项目环境影响的医学评价方法研究

作者在对中国我人民解放军第４７医院病建项目所产生的大气环境影响进行了医学秤价和影响，并在预测的基础上，建立了完整的环境医学影响廉政价方法，由于该评价方法完全尊循了国内现行大气环境影响评价的基本要求和程序，因此，它在今后的环境影响医学评价中净有广泛的应用。     

建立我国重大事故预防控制体系之探讨

简述了我国重大工业事故发生的主要原因，提出了建立重大事故预防控制体系的建议，制定《重大事故预防和控制法》，实行重大危险源上报、登记、评价、分级监察管理，建立国家、省、市三级重大事故应急反应系统和重大危险源动态监控网络系统。     

烟草行业的火灾特点及其监测方法的讨论

烟厂是火灾危险性较大的部门，加强其火灾的早期探测报警是防止火灾发生、减少火灾损失的重要方面。本文对烟厂中各主要生产环节的火灾特点作了分析，指出应针对各部分的特殊性采取适当的火灾探测方法并对现在常用的一些火灾探测技术在烟厂中的适用性作了讨论，认为现有的光束式火灾探测器较适用于内部空间较大的烟厂仓库和厂房。对安装了电视监控系统的企业，建议将其与计算机图象分析技术相结合，增加其防火监视功能。     

郫县灰潮田有效硅含量和小麦施硅效应初探

通过同田对比试验，本文对郫县水稻土小麦施用硅肥进行了初步研究．结果表明，小麦施硅获得了增产效果；施硅对小麦穗粒数、株高和基部节间体积等具有生长效应；郫县水稻土有效硅含量为１２７±３９ｍｇ·ｋｇ－１（ｎ＝１２），变异较大，与土壤粘粒（＜０．００１ｍｍ）呈极显著正相关（ｒ＝０．７９）；发育于第四系岷江灰色冲积母质的郫县水稻上，粘粘含量普遍较低，因此，郫县小麦施硅具有较大增产潜力．     

ASSESSING FLOOD MITIGATION ALTERNATIVES IN SHIJR AREA IN METROPOLITAN TAIPEI1

The Keelung River Basin in northern Taiwan lies immediately upstream of the Taipei metropolitan area. The Shijr area is in the lower basin and is subject to frequent flooding. This work applies micromanagement and source control, including widely distributed infiltration and detention/ retention runoff retarding measures, in the Wudu watershed above Shijr. A method is also developed that combines a genetic algorithm and a rainfall runoff model to optimize the spatial distribution of runoff retarding facilities. Downstream of Wudu in the Shijr area, five dredging schemes are considered. If 10‐year flood flows cannot be confined in the channel, then a levee embankment that corresponds to the respective runoff retarding scheme will be required. The minimum total cost is considered in the rule to select from the regional flood mitigation alternatives. The results of this study reveal that runoff retarding facilities installed in the upper and middle parts of the watershed are most effective in reducing the flood peak. Moreover, as the cost of acquiring land for the levee embankment increases, installing runoff retarding measures in the upper portion of the watershed becomes more economical.     

INVESTIGATION OF TURBIDITY MAXIMUM IN A MESOTIDAL ESTUARY,TAIWAN1

ABSTRACT: To comprehend the distributions of salinity, temperature, and suspended sediment in the Danshuei River estuary in Taiwan, monthly field surveys were conducted in 2003. These included several high and low slackwater surveys and intensive surveys. The results show that the Danshuei River estuary is predominately a partially mixed estuary. The highest concentration of suspended sediment is typically observed at the Chung‐Hsin Bridge, the most upstream sampling station. The suspended sediment concentration exhibits a general decreasing trend in the downstream direction. It may be concluded that the sediments mostly come from the upstream reach. A locally high concentration of suspended sediment is found at the Kuan‐Du station because of the local deep channel bathymetry and two‐layered estuarine circulation. A vertical two‐dimensional hydrodynamic and sediment transport model is applied to investigate the tidally averaged salinity distribution, residual circulation, and suspended sediment concentration. The modeling results reveal that, under the Q₇₅ flow condition (i.e., low flow), a turbidity maximum occurs at the Kuan‐Du station due to the strong estuarine circulation. The model simulation with a much higher river flow condition results in a weaker residual circulation and weaker turbidity maximum.