Balancing Forest‐Regeneration Probabilities and Maintenance Costs in Dry Grasslands of High Conservation Priority

Abstract: Abandonment of agricultural land has resulted in forest regeneration in species‐rich dry grasslands across European mountain regions and threatens conservation efforts in this vegetation type. To support national conservation strategies, we used a site‐selection algorithm (MARXAN) to find optimum sets of floristic regions (reporting units) that contain grasslands of high conservation priority. We sought optimum sets that would accommodate 136 important dry‐grassland species and that would minimize forest regeneration and costs of management needed to forestall predicted forest regeneration. We did not consider other conservation elements of dry grasslands, such as animal species richness, cultural heritage, and changes due to climate change. Optimal sets that included 95–100% of the dry grassland species encompassed an average of 56–59 floristic regions (standard deviation, SD 5). This is about 15% of approximately 400 floristic regions that contain dry‐grassland sites and translates to 4800–5300 ha of dry grassland out of a total of approximately 23,000 ha for the entire study area. Projected costs to manage the grasslands in these optimum sets ranged from CHF (Swiss francs) 5.2 to 6.0 million/year. This is only 15–20% of the current total estimated cost of approximately CHF30–45 million/year required if all dry grasslands were to be protected. The grasslands of the optimal sets may be viewed as core sites in a national conservation strategy.     

Estimating Evapotranspiration for Dryland Cropping Systems in the Semiarid Texas High Plains Using SWAT

The Soil and Water Assessment Tool (SWAT) is one of the most widely used watershed models for simulating hydrology in response to agricultural management practices. However, limited studies have been performed to evaluate the SWAT model's ability to estimate daily and monthly evapotranspiration (ET) in semiarid regions. ET values were simulated using ArcSWAT 2012 for a lysimeter field managed under dryland conditions at the USDA‐ARS Conservation and Production Research Laboratory at Bushland, Texas, and compared with measured lysimeter values from 2000 to 2010. Two scenarios were performed to compare SWAT's performance: (1) use of default plant leaf area index (LAI) values in the embedded plant database and (2) adjusted LAI values. Scenario 1 resulted in an “unsatisfactory” Nash‐Sutcliffe efficiency (NSE) of 0.42 and 0.38 for the calibration and validation periods, respectively. Scenario 2 resulted in a “satisfactory” NSE value for the calibration period while achieving a “good” NSE of 0.70 for the validation period. SWAT generally underestimated ET at both the daily and monthly levels. Overestimation during fallow years may be due to the limitations of the pothole function used to simulate furrow diking. Users should be aware of potential errors associated with using default LAI parameters. Inaccuracies in ET estimation may also stem from errors in the plant stress functions, particularly when evaluating water management practices for dryland watersheds.     

Assessing the fate of radioactive nickel in cultivated soil cores

Parameters regarding fate of ⁶³Ni in the soil–plant system (soil: solution distribution coefficient, K_d and soil plant concentration ratio, CR) are mostly determined in controlled pot experiments or from simple models involving a limited set of soil parameters. However, as migration of pollutants in soil is strongly linked to the water migration, variation of soil structure in the field and seasonal variation of evapotranspiration will affect these two parameters. The aim of this work was to explore to what extent the downward transfer of ⁶³Ni and its uptake by plants from surface-contaminated undisturbed soil cores under cultivation can be explained by isotopic dilution of this radionuclide in the pool of stable Ni of soils. Undisturbed soil cores (50 cm × 50 cm) were sampled from a brown rendzina (Rendzic Leptosol), a colluvial brown soil (Fluvic Cambisol) and an acidic brown soil (Dystric Cambisol) using PVC lysimeter tubes (three lysimeters sampled per soil type). Each core was equipped with a leachate collector. Cores were placed in a greenhouse and maize (DEA, Pioneer^®) was sown. After 44 days, an irrigation was simulated at the core surfaces to supply 10 000 Bq ⁶³NiCl₂. Maize was harvested 135 days after ⁶³Ni input and radioactivity determined in both vegetal and water samples. Effective uptake of ⁶³Ni by maize was calculated for leaves and kernels. Water drainage and leaching of ⁶³Ni were monitored over the course of the experiment. Values of K_d in surface soil samples were calculated from measured parameters of isotopic exchange kinetics. Results confirmed that ⁶³Ni was strongly retained at the soil surface. Prediction of the ⁶³Ni downward transfer could not be reliably assessed using the K_d values, since the soil structure, which controls local water fluxes, also affected both water and Ni transport. In terms of ⁶³Ni plant uptake, the effective uptake in undisturbed soil cores is controlled by isotope dilution as previously shown at the pot experiment scale.     

Air Pollution Effects of Incinerator Firing Practices and Combustion Air Distribution

A survey of academic programs in air pollution control was made. Results from the 127 schools reporting are tabulated by state. Faculty involved in air pollution instruction are identified. Some conclusions and recommendations are presented.     

Facilities and Techniques for Maintaining a Controlled Fluoride Environment in Vegetation Studies

The principle of fabric filtration has only recently been accepted for fossil fuel fired boiler particulate emissions control. Information on design criteria is, therefore, limited. The paper provides data on the few installations where baghouses have been installed and successfully operated. The general conclusion is that a strong relationship exists between air to cloth ratio and bag life.     

Comments On “Particulate Pollutants in the Air of the United States”

This study was undertaken to identify seasonal and source effects on the par-ticulate contaminants of the New York City atmosphere and ultimately to relate the concentrations of these contaminants to the tissue concentrations in residents of New York City. Continual weekly samples of particulates have been collected at three stations in the New York area on 8 by 10 in. glass fiber filters at a flow rate of 20 cfm.

The sample is ashed with a Tracerlab Low Temperature Asher and leached with nitric acid. Metals analyzed by the Atomic Absorption method include Pb, V, Cd, Cr, Cu, Mn, Ni, and Zn. Lead-210, total particulate, and benzene and acetone soluble organic material are also determined.

The data have been related to various meteorological parameters over a one year period to define significant seasonal and source influences, as well as site to site variations. Very significant inverse correlations to temperature are obtained for suspended particulates, vanadium, and nickel at both Manhattan and Bronx sites. Particulates show a less significant inverse correlation to temperature In lower Manhattan. Oil-fired space heating sources appear to account for as much as 50% of the particulates in the Bronx at the peak demand period.

Lead, copper, and cadmium show a general inverse correlation to average wind speed, and a direct correlation to temperature. The latter is most likely due to an inverse relation between wind speed and temperature. The heating season input for particulates, vanadium, and nickel is so great as to overcome most of the dilution effect due to winds. The other elements having more constant nonseasonal inputs, definitely reflect the effects of the wind.

The most significant site effect occurs with cadmium, which has a concentration in lower Manhattan three times that of the Bronx over a period of six to seven months in the summer and fall. The differences observed for cadmium and particulates may be explained by emission source factors which have not as yet been studied.     

Effects of Design and Fuel Moisture on Incinerator Effluents

The particle and gas properties that profoundly affect design and performance of fly ash precipitators are discussed and evaluated in this section. Relation of the coal burned to these properties and to the precipitator gas cleaning problem is broadly examined. The need for a high order of technology consistently applied to cope successfully with the wide and often uncertain variations in coal and ash properties encountered in precipitation practices is emphasized.     

Glass Fibers and Their Use as Filter Media

Typical air quality effect levels of photochemical oxidants on specific plant substrates are illustrated. These include ambient oxidant exposure data measured as “total oxidant” as well as laboratory exposures to individual pure oxidants, ozone, or PAN compounds, since these oxidants are identified in photochemical smog. New terms, “PaNs” and “PAN-type” oxidant, have been proffered for purposes of clarification of the terminology. PAN-type oxidant more precisely defines the phytotoxicant complex causing silvering or bronzing of the lower leaf surfaces in lieu of the older term “oxidant.” Due to the recognition of several oxidizing phytotoxicants in recent years, it is recommended that the term oxidant be reserved for use as a generic term. A tabular classification of the oxidizing phytotoxicants found in community photochemical smog and the specific syndromes produced is provided.