Distribution of Selected Soil and Water Conservation Practices in the U.S. as Identified with Google Earth

The proper representation of conservation practices on agricultural lands is an important factor in large‐scale assessments of water quality in the United States. Unfortunately, there are few publicly available data sources at the local level and even fewer at the national scale. In this research, randomly selected points within agricultural lands were examined for selected conservation practices using Google Earth aerial imagery by a team of interpreters. In total, 13,530 points had field boundaries digitized, and were subsequently examined and classified. The presence of terraces, grassed waterways, contour farming, center pivot irrigation, strip cropping, ponds, riparian vegetation, filter strips, and land cover were noted. Subjectivity among interpreters was evaluated using duplicate samples and was found to be similar to image misclassification rates in other research. Conservation practice adoption rates for selected major river basins compared favorably with data collected by the Conservation Effects Assessment Project. The frequency of occurrence of each conservation practice was summarized and presented by ecoregion. To facilitate future research, point level data and software source code developed in this research are available via the web at http://nlet.brc.tamus.edu/Conservation . Aerial imagery was found to be a powerful, inexpensive, and easily accessible tool to assess large‐scale conservation practice implementation for certain conservation practices.     

Development of a Cropland Management Dataset to Support U.S. Swat Assessments

The Soil and Water Assessment Tool (SWAT) is widely used in the United States (U.S.) to simulate hydrology and water quality simulation. Process‐based models like SWAT require a great deal of data to accurately represent the natural world, including topography, land use, soils, weather, and management. With the exception of management, all these data are available nationally from multiple sources. To date, credible SWAT studies in the U.S. have assembled suitable management data (operation scheduling, fertilization application rates, and plant growth parameterization). In this research, we develop a national management database for SWAT using existing U.S. Department of Agriculture data sources. These data are compatible with existing SWAT interfaces and are relatively easy to use. Although management data from local sources is preferred, these data are not always available. This work is intended to fill this void with more reasonable management data than the existing defaults. This national database covers all major cultivated crops and should facilitate improved SWAT applications in the U.S. These data were tested in two case studies and found to produce satisfactory SWAT predictions. The database developed in this research is freely available on the web.     

Controlling Air Toxics Emissions From Remediation by Monitoring of Surrogate Parameters

Particulate matter (dust) from remediation and demolition sites may pose a potential risk to the nearby public due to the presence of various contaminants. Unfortunately, there are no good options for real‐time monitoring of metals, polychlorinated biphenyls, etc. in wind‐blown dust. A three‐tiered approach involving a combination of real‐time monitoring and off‐site analysis that has proved successful is described in this article. PM₁₀ is used as a surrogate parameter for metals and other nonvolatile pollutants, and real‐time monitoring is used to guide dust control measures. If dust emissions are controlled, air emissions of metals and other nonvolatile pollutants also are controlled. © 2014 Wiley Periodicals, Inc.     

First-trimester maternal serum alphafetoprotein and chorionic gonadotropin in aneuploid pregnancies

First-trimester maternal serum alpha-fetoprotein (AFP) and human chorionic gonadotropin (HCG) levels were measured in samples from 29 women with cytogenetically abnormal pregnancies and 145 women with cytogenetically normal pregnancies matched for gestational age, race, and sample storage time. All patients had a risk of fetal aneuploidy greater than or equal to that of a mother 35 years of age. AFP was significantly lower in samples from pregnancies affected with trisomy 21 (0.67 MoM;p <0.05), while HCG values were no different from those of matched controls. Trisomies 13 and 18 could not be distinguished from matched controls by AFP. However, levels of HCG were significantly lower in such pregnancy samples, with median values of 0.65 MoM in trisomy 13 and 0.32 MoM in trisomy 18 (p<0.05). Variations in AFP and HCG levels suggest that expressed differences between autosomal aneuploidies include differences in fetal and placenta! protein production in the first trimester.     

The dynamic response of pressure relief valves in vapor or gas service,part I: Mathematical model

In order to prevent unstable operation, or “chatter”, of a pressure relief the API guidelines recommend limiting the irreversible pressure loss in the inlet line to a pressure relief valve to no more than 3% of the valve set pressure. This criterion is based on steady-state operating conditions and a typical blow-down pressure for the valve of about 7% of the set pressure. However, the stability of the valve is also influenced by other factors such as the dynamic response of the valve disk to the unsteady pressures and forces exerted by the fluid on the disk. A model for the opening lift dynamic response of a pressure relief valve in gas/vapor service is presented here which accounts for all of these effects through a set of five coupled nonlinear algebraic/differential equations. These equations are solved by a numerical method that can be implemented on a spreadsheet to predict the position of the valve disk as a function of time for given valve characteristics, operating conditions, and installation parameters. The model incorporates the influence of the various parameters on the stable/unstable nature of the disk response. An example is presented for a typical valve that illustrates the various modes of stable and unstable dynamic response that can be predicted by the model under various conditions. Two additional papers will be forthcoming: Part II – Experimental Investigation and Part III – Analysis of Data and Comparison with Model Predictions.     

BANK STABILITY ANALYSIS FOR PREDICTING REACH SCALE LAND LOSS AND SEDIMENT YIELD1

ABSTRACT: When extensive lengths of river become stabilized (e.g., by channel incision), riverbank erosion can result in considerable riparian land loss and the delivery of large volumes of sediment downstream. The ability to predict the stability and failure geometry of eroding riverbanks is therefore an important prerequisite in estimating the rate of bank erosion and sediment yield associated with bank erosion. In this paper, a new stability analysis for layered river banks is introduced. The new analysis differs from many previous analyses in that it takes into consideration the effects of positive pore water pressure in the saturated portion, and negative pore water pressure in the unsaturated portion, of the bank as well as the influence of hydrostatic confining pressure due to the water level in the river. In addition, the failure plane is not constrained to pass through the toe of the bank and the bank profile geometry is not restricted to an idealized special case. The predictive ability of the new bank stability analysis is assessed using data from two field sites. Subsequently, a methodology for applying the bank stability analysis at the scale of the river reach (0.1 to 10 km) is discussed. This method involves the use of empirical models of bed level adjustment to estimate the magnitude of incision at specific locations along the reach, with these estimates used to drive the stability analysis. Application of the new method is demonstrated with an example.     

Production of polyhydroxyalkanoate during treatment of tomato cannery wastewater.

Polyhydroxyalkanoate (PHA) production was achieved using tomato cannery waste coupled with a mixed microbial culture during wastewater treatment. The two-stage PHA production process comprised a sequencing batch reactor (SBR), operating under a periodic feast-famine regime, to accomplish simultaneously wastewater treatment and selection of PHA-accumulating microbes, followed by a batch reactor for the production of PHA-rich biomass. The SBRs were efficient at removing soluble carbon (84%), ammonia (100%), and phosphorus (76%). Meanwhile, PHA-accumulating microbes were enriched under the SBR operating conditions, and PHA content on a cell-weight basis was within the range 7 to 11% in nonfiltered wastewater and 2 to 8% in filtered wastewater. Subsequently, batch studies were implemented with varying loading rates, ranging from 0.4 to 3.2 food-to-microorganism ratios. A maximum 20% PHA content on a cell-weight basis was obtained. Based on the experimental results, a PHA biosynthesis-degradation kinetic model was developed to (1) aid in the design of a pilot- or full-scale PHA production process coupled with wastewater treatment and (2) determine optimal conditions for harvest of PHA-rich biomass.     

Determinants of organizational commitment in working women: Some implications for organizational integration

This study proposed and examined determinants of organizational commitment in working women. Among the selected determinants of role stress, personal characteristics, and satisfaction with various aspects of the organization, satisfaction with promotional opportunities was die best predictor of commitment. Experienced role stress was the second best determinant, although the observed relationship was inverse. Other variables such as age, education, and need for achievement, found to be antecedents of organizational commitment in earlier empirical studies, failed to predict commitment in this heterogeneous sample of working women. Findings were discussed in terms of the implications for further research and theory development in the area of organizational commitment as well as for the integration of women into modern work organizations.