Enantioselective recognition of mono-demethylated methoxychlor metabolites by the estrogen receptor

Metabolites of methoxychlor such as 2-(p-hydroxyphenyl)-2-(p-methoxyphenyl)-1,1,1-trichloroethane (mono-OH-MXC) and 2,2-bis(p-hydroxyphenyl)-1,1,1-trichloroethane (bis-OH-MXC), have estrogenic activity. Mono-OH-MXC is a chiral compound in which the carbon atom bridging two benzene rings is the chiral centre. In previous studies the estrogenic activity of racemic mono-OH-MXC has been measured, and the activity of each enantiomer of this compound has not yet been elucidated. In this study, we evaluated the estrogen receptor-binding activity of each enantiomer of mono-OH-MXC to clarify the enantioselective recognition by the estrogen receptor. (S)-mono-OH-MXC showed 3-fold higher binding activity than that of the (R) enantiomer. The activity of bis-OH-MXC was only 1.7-fold higher than that of (S)-mono-OH-MXC. This result suggests that the one hydroxy group and the orientation of the CCl3 group of mono- and bis-OH-MXCs are important for the interaction with the estrogen receptor. The result also points out the estrogenic activity of methoxychlor after metabolic activation in vivo, which predominantly produces the (S)-mono-OH-MXC, may be higher than estimated from the in vitro activity of racemic mixtures.     

Production of surfactin using pentose carbohydrate by Bacillus subtilis

Interest in microbial surfactants has been steadily increasing in recent years due to their diversity, mass production possibility, selectivity, performance under extreme conditions and potential applications in environmental protection. In this study two pentose sugars (xylose and arabinose) were investigated for the submerged fermentation (SmF) of Bacillus subtilis in surfactant production medium for bio-surfactant surfactin production. An excellent vegetative growth of B. subtilis (× 10¹⁰ CFU/mL) was observed for xylose and arabinose containing medium which were comparable to glucose supplemented medium. Low growth (× 10⁸ CFU/mL) was found when medium was not supplemented with any of the sugars. Surfactin production in xylose, arabinose and glucose containing medium was 2700, 2600 and 2000 mg/L, respectively, whereas, medium without any sugar showed low surfactin (700 mg/L) production. These results clearly indicate the effect of pentose sugars on production of surfactin. Gradual depletion of the xylose and arabinose were confirmed by HPLC analysis during the growth phase of the strain that ultimately produced the surfactin.     

Vulnerability and behavioral response to ultraviolet radiation in the components of a foliar mite prey–predator system

Ambient ultraviolet-B (UVB) radiation impacts plant-dwelling arthropods including herbivorous and predatory mites. However, the effects of UVB on prey?Cpredator systems, such as that between the herbivorous spider mite and predatory phytoseiid mite, are poorly understood. A comparative study was conducted to determine the vulnerability and behavioral responses of these mites to ultraviolet (UV) radiation. First, we analyzed dose?Cresponse (cumulative irradiance-mortality) curves for the eggs of phytoseiid mites (Neoseiulus californicus, Neoseiulus womersleyi, and Phytoseiulus persimilis) and the spider mite (Tetranychus urticae) to UVB radiation from a UV lamp. This indicated that the phytoseiid mites were more vulnerable than the spider mite, although P. persimilis was slightly more tolerant than the other two phytoseiid mites. Second, we compared the avoidance behavior of adult female N. californicus and two spider mite species (T. urticae, a lower leaf surface user; Panonychus citri, an upper leaf surface user) in response to solar UV and visible light. N. californicus actively avoided both types of radiation, whereas P. citri showed only minimal avoidance behavior. T. urticae actively avoided UV as well as N. californicus but exhibited a slow response to visible light as well as P. citri. Such variation in vulnerability and avoidance behavior accounts for differences in the species adaptations to solar UVB radiation. This may be the primary factor determining habitat use among these mites on host plant leaves, subsequently affecting accessibility by predators and also intraguild competition.     

Reproductive disturbance of Japanese bumblebees by the introduced European bumblebee Bombus terrestris

The European bumblebee, Bombus terrestris, is an invasive eusocial species whose distribution is expanding greatly beyond its native range because numerous colonies are imported to or locally produced in non-native countries for pollination of agricultural crops. Closely related species exist in Japan where the unrestricted import and use of B. terrestris has resulted in the establishment of wild colonies. Laboratory studies previously showed that B. terrestris and Japanese native species can copulate and produce fertilized eggs. Although these eggs do not hatch, the interspecific mating can cause a serious reproductive disturbance to native bumblebees. In this study, we determined the frequencies of interspecies mating between B. terrestris males and native bumblebee queens in the wild on the islands of Hokkaido and Honshu by analyzing the DNA sequences of spermatozoa stored in spermathecae of native queens. We found that 20.2% of B. hypocrita hypocrita queens and 30.2% of B. hypocrita sapporoensis queens had spermatozoa of B. terrestris males in their spermathecae. Given that a Bombus queen generally mates only once in her life, such high frequencies of interspecific mating with B. terrestris pose serious threats to the populations of native bumblebees in Japan.     

Decomposing detonation and deflagration properties of ozone/oxygen mixtures

In this study, the decomposing detonation and deflagration properties of ozone/oxygen mixtures of up to 20 vol.% of ozone in oxygen under high pressure of up to 1.0 MPa in a tube were experimentally investigated. The mixtures were ignited by an electric spark at the end of the tube. Flame propagation properties such as flame velocity and pressure were measured with thermocouples and piezo electric transducers mounted along the tube. Slow and constant flame propagation profiles were obtained. We also investigated the quenching ability of a wire gauze as well as the concentration limit for flame propagation. However, in spite of slow flame propagation velocity and easy flame quenching properties under these experimental conditions, direct initiation of detonation by the driver detonation of the stoichiometric oxy-hydrogen mixture was easily achieved at much lower concentrations than the limit of deflagration. The observed detonation properties, such as wave velocity and pressure, agreed fairly well with C–J calculated values. The detonation velocity (900–1200 m/s) and the pressure ratio to initial pressures (5–9.5) were not affected by the initial pressure of the mixtures. Near the detonation limit, typical spinning detonations with oscillatory pressure waves were observed.     

Pore structure and adsorption properties of carbonized material prepared from waste paper

We have already reported the adsorptivity and pore structure of activated carbon made from waste newspaper in order to use the waste paper for purposes other than paper-making stock. However, manufacturing the activated carbon may not necessarily be an advantageous method based on environmental concerns and the effective use of the resource because the reaction during the activating process is endothermic and the amount of carbon consumed is significant. Here, we examine the pore structure and adsorption properties of waste newspaper used as an adsorbent in the form of a carbonized material. Waste newspaper was carbonized for 2 h in the temperature range 400°–1000°C. The specific surface area of the carbonized material obtained, 418 m²/g, was highest for the sample carbonized at 800°C, which was equal to or greater than that of commercially available charcoal. Moreover, the iodine adsorption number of 581 mg/g was the highest and the rate of adsorption was the fastest for the sample carbonized at 800°C. However, the humidity control capability was highest for the material carbonized at 600°–700°C. It has been determined that it is advantageous to carbonize waste paper at 800°C in order to use the carbonized material as an adsorbent, while carbonization at 600°–700°C is more advantageous for use as a humidity control material. Received: June 23, 2000 / Accepted: January 17, 2001     

Porous structure of activated carbon prepared from waste newspaper

In an earlier report, we presented a method for preparing activated carbon from waste newspaper as a way to recycle used paper for a purpose other than producing raw material for paper-making. In this article, we consider the porous structure of the activated carbon that affects its adsorption properties for various substances. The specific surface area of activated carbon prepared from waste newspaper was 838 m²/g, the micropore volume was 0.368 ml/g, and the mesopore volume was 0.138 ml/g, which is about the same as commercially available activated carbon. The activated carbon prepared from waste newspaper usually has a high content of ash, which makes little contribution to the adsorption properties. In particular, as compared with reagent-activated carbon, the quantities of mesopores with a pore radius of 3–25 nm and macropores with a pore radius of 25–250 nm were 8 and 14 times larger, respectively. Activated carbon prepared from waste newspaper has a well-developed porous structure, particularly in the mesopore and macropore ranges. Received: July 12, 1999 / Accepted: March 8, 2000     

Polychlorinated biphenyl levels in the blood of Japanese individuals ranging from infants to over 80 years of age

Individuals’ exposure to various persistent organic pollutants (POPs), including polychlorinated biphenyls (PCBs), and its adverse health effects have been a cause of concern. We measured blood PCB concentrations from samples taken from 507 Japanese individuals ranging from infants to those over 80 years of age. The blood PCB levels increased with age for both male (Spearman’s r?=?0.69, p?<?0.001) and female (Spearman’s r?=?0.70, p?<?0.001) participants. Adult men and nulliparous women showed similar increases with age. However, the PCB levels of multiparous women were lower than those of nulliparous women in their thirties (p?=?0.005), probably because the PCBs were transferred from the mothers to their children during pregnancy and lactation. Among infants (<2 years of age), some had as high levels of accumulated PCB levels as those in adults >30 years of age. In some cases, the PCB levels were over 0.8 ng/g wet weight, similar to levels observed in adults over 50 years of age. In the future, it will be necessary to do research on the health of the children who are exposed by high concentration level of POPs.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.