Spatial Analysis of Volatile Organic Compounds from a Community-Based Air Toxics Monitoring Network in Deer Park,Texas, USA

In the summer of 2003, ambient air concentrations of volatile organic compounds (VOCs) were measured at 12 sites within a 3-km radius in Deer Park, Texas near Houston. The purpose of the study was to assess local spatial influence of traffic and other urban sources and was part of a larger investigation of VOC spatial and temporal heterogeneity influences in selected areas of Houston. Seventy 2-h samples were collected using passive organic vapor monitors. Most measurements of 13 VOC species were greater than the method detection limits. Samplers were located at 10 residential sites, a regulatory air monitoring station, and a site located at the centroid of the census tract in which the regulatory station was located. For residential sites, sampler placement locations (e. g., covered porch vs. house eaves) had no effect on concentration with the exception of methyl tertiary-butyl ether (MTBE). Relatively high correlations (Pearson r > 0.8) were found between toluene, ethylbenzene, and o,m,p-xylenes suggesting petroleum-related influence. Chloroform was not correlated with these species or benzene (Pearson r < 0.35) suggesting a different source influence, possibly from process-related activities. As shown in other spatial studies, wind direction relative to source location had an effect on VOC concentrations.     

Effect of fertilizer application on soil heavy metal concentration

A large amount of chemicals is annually applied at the agricultural soils as fertilizers and pesticides. Such applications may result in the increase of heavy metals particularly Cd, Pb, and As. The objective of this study was to investigate the variability of chemical applications on Cd, Pb, and As concentrations of wheat-cultivated soils. Consequently, a study area was designed and was divided into four subareas (A, B, C, and D). The soil sampling was carried out in 40 points of cultivated durum wheat during the 2006–2007 periods. The samples were taken to the laboratory to measure their heavy metal concentration, soil texture, pH, electrical conductivity, cationic exchange capacity, organic matter, and carbonate contents. The result indicated that Cd, Pb, and As concentrations were increased in the cultivated soils due to fertilizer application. Although the statistical analysis indicates that these heavy metals increased significantly (P value < 0.05), the lead and arsenic concentrations were increased dramatically compared to Cd concentration. This can be related to overapplication of fertilizers as well as the pesticides that are used to replant plant pests, herbs, and rats.     

Trend and concentrations of legacy lead (Pb) in highway runoff

This study presents the results of lead (Pb) concentrations from both highway runoff and contaminated soil along 32 and 23 highway sites, respectively. In general, the Pb concentration on topsoil (0-15 cm) along highways was much higher than the Pb concentration in subsurface soil (15-60 cm). The Pb deposited on soil appears to be anthropogenic and a strong correlation was found between the Pb concentration in surface soil and highway runoff in urban areas. The concentration of Pb measured during 1980s from highways runoff throughout the world was up to 11 times higher than the measured values in mid 1990 s and 2000s. The current Pb deposited on soil near highways appears to be a mixture of paint, tire weight balance and old leaded gasoline combustion. Overall, the Pb phase-out regulation reduced the Pb deposits in the environment and consequently lowered Pb loading into receiving waters.     

Leachability of dissolved chromium in asphalt and concrete surfacing materials

Leachate metal pollutant concentrations produced from different asphalt and concrete pavement surfacing materials were measured under controlled laboratory conditions. The results showed that, in general, the concentrations of most metal pollutants were below the reporting limits. However, dissolved chromium was detected in leachate from concrete (but not asphalt) specimens and more strongly in the early-time leachate samples. As the leaching continued, the concentration of Cr decreased to below or close to the reporting limit. The source of the chromium in concrete pavement was found to be cement. The concentration of total Cr produced from leachate of different cement coming from different sources that was purchased from retail distributors ranged from 124 to 641 μg/L. This result indicates that the potential leachability of dissolved Cr from concrete pavement materials can be reduced through source control. The results also showed that the leachability of dissolved Cr in hardened pavement materials was substantially reduced. For example, the concentration of dissolved Cr measured in actual highway runoff was found to be much lower than the Cr concentration produced from leachate of both open and dense graded concrete pavement specimens under controlled laboratory study. It was concluded that pavement materials are not the source of pollutants of concern in roadway runoff; rather most pollutants in roadway surface runoff are generated from other road-use or land-use sources, or from (wet or dry) atmospheric deposition.     

Hydrochemical and geoelectrical investigation of the coastal shallow aquifers in El-Omayed area, Egypt

Monitoring and assessment of the coastal aquifers are becoming a worldwide concern for the need of additional and sustainable water resources to satisfy demographic growth and economic development. A hydrochemical and geoelectrical investigation was conducted in the El-Omayed area in the northwestern coast of Egypt. The aim of the study was to delineate different water-bearing formations, provide a general evaluation of groundwater quality, and identify the recharge sources in aquifers. Thirty-seven water samples were collected and chemically analyzed from the sand dune accumulations and oolitic limestone aquifers. Fifteen profiles of vertical electrical soundings (VESs) were obtained in the oolitic limestone aquifer to examine the variations of subsurface geology and associated groundwater chemistry. The groundwater reserves in the El-Omayed area are mainly contained in sand dune accumulations and oolitic limestone aquifers. The aquifer of sand dune accumulations contains freshwater of low salinity (average total dissolved solids (TDS)?=?974 mg/l). Groundwater of oolitic limestone aquifer is slightly brackish (average TDS?=?1,486 mg/l). Groundwater of these aquifers can be used for irrigation under special management for salinity control, and regular leaching as indicated by electrical conductivity and sodium adsorption ratio. Results of VES interpretation classified the subsurface sequence of oolitic limestone aquifer into four geoelectric zones, with increasing depth, calcareous loam, gypsum, oolitic limestone, and sandy limestone. Oolitic limestone constitutes the main aquifer and has a thickness of 12–32 m.     

Heavy-metal distribution and risk assessment of sediment and fish from El-Mex Bay, Alexandria, Egypt

Heavy metals are increasingly being released into natural waters from geological and anthropogenic sources. The distribution of several heavy metals (Cr, Cu, Cd, Pb, Zn, and Hg) was investigated in muscle, gill, and liver in two different fish species seasonally collected in El-Mex Bay (autumn 2004-summer 2005). In order to evaluate the pollution status of the Bay, the concentrations of the selected metals in the labile and total fractions were analysed in sediment samples collected from eight sites in El-Mex Bay during autumn 2004. Also, the Index of Geoaccumulation (I_geo) for the sediment was estimated. The total and labile fractions of the selected metals in sediment samples were 15.2 and 62.8 μg g^-1 dw for Cu, 1.8 and 5.0 μg g^-1 dw for Cd, 79.1 and 130.3 μg g^-1 dw for Zn, 0.2 and 1.2 μg g^-1 dw for Hg, 35.8 and 93.0 μg g^-1 dw for Pb, and 13.9 and 31.0 μg g^-1 dw for Cr. The concentrations of all metals were lower in flesh than those recorded in liver and gill due to their physiological roles. The metal pollution index for fish was calculated. Health hazard calculations for the contaminated sediments and fish consumption were calculated to evaluate the effect of pollution on health.     

Characteristics of highway stormwater runoff.

Highway stormwater runoff was monitored at three highway sites in Los Angeles, California, during the 2000 to 2003 wet seasons. Event mean concentrations (EMCs), partial event mean concentrations (PEMCs), and mass first flush (MFF) factors were calculated for more than 20 water quality parameters for samples from 20 storm events from each site. The early runoff had higher concentrations, as indicated by the PEMCs at 30 and 60 minutes into the storm, which were 1.9 to 7.4 times higher than the EMCs. A strong first flush was observed for chemical oxygen demand (COD) and other organic pollutants, with 40% of the pollutant mass being discharged in the first 20% of the runoff. A weak first flush was observed for ionic pollutants, such as nitrate and nitrite. Pearson correlation analyses of the EMCs, PEMCs, and MFFs showed strong correlations among dissolved organic carbon, COD, total Kjeldahl nitrogen, oil and grease, and ammonia-nitrogen. Contrary to generally held beliefs, poor correlation between total suspended solids and most other conventional pollutants was observed. In addition, poor correlation between most monitored pollutants and storm characteristics, except for antecedent dry days, was observed.     

Seasonal variations of polycyclic aromatic hydrocarbons in coastal sediments of a marine resource hot spot: the case of pars special economic energy zone,Iran

Environmental Geochemistry and Health - Polycyclic aromatic hydrocarbons (PAHs) are an important group of compounds of major environmental concern, which are in the class of persistent organic...     

Natural dyes and antimicrobials for green treatment of textiles

Increasing studies on extraction, purification and modification processes of natural dyes and antimicrobials, and their subsequent application on textiles demonstrate the revival of natural dyeing and finishing. Natural dyes have been widely used in textile coloration since ancient times. But, with advent of man-made synthetic dyes in the mid-nineteenth century, the dye market has been captured due to a variety of competitive properties of synthetic dyes against natural ones such as lower cost, higher fastness, color variety, ability to dye synthetic fibers and availability in large industrial scale. However, most of the synthetic dyes raise some serious problems in human health and cause environmental risks. Due to these drawbacks along with the growing awareness about cleaner surroundings and healthy lifestyle, there has been recently a worldwide interest in the production and application of dyes from two natural sources, plants and microorganisms. Most of these natural dyes have also inherently antimicrobial properties and could consequently possess high medicinal activity. They are extracted from different types of microorganisms as well as various parts of the plants that contain coloring materials such as tannin, flavonoids and quinonoids. Here we review the latest scientific researches on extraction and application of natural dyes/antimicrobials on textiles as effective coloring and antibacterial agents. First, different methods of extraction of natural dyes/antimicrobials will be discussed, and then, current methods of textile treatments and examples of early applications of these dyes on textile processing, properties achieved and the results obtained will be presented.