Drink driving deterrents and self-reported offending behaviours among a sample of Queensland motorists

Problem

The efficacy of drink driving (driving under the influence, DUI) countermeasures to deter motorists from driving over the legal limit is extremely important when considering the personal and economic impact the offending behavior has on the community. This paper reports on an examination of 780 Queensland motorists' perceptions of legal and non-legal sanctions and their deterrent impact on self-reported offending behavior. Method: The data were collected via a telephone survey of motorists recruited from a random sample of all listed telephone numbers in the state, adjusted according to district population figures. Results: The results indicated that there were a range of legal and non-legal factors that were significantly associated with self-reported DUI including: the perceived risk of apprehension and license loss (legal factors); and concerns relating to the possibility of being involved in a crash and hurting another person (non-legal factors). However, additional multivariate analyses indicated that while both legal and non-legal factors significantly predicted self-reported DUI, higher alcohol consumption levels and more favorable attitudes to the behavior also appear to increase the likelihood of DUI. Discussion: The paper will outline the direct implications of the research project such as the development and promotion of countermeasures that both effectively deter motorists and address pro-offending attitudes. Impact on industry: The findings also highlight that DUI remains a relatively common behaviour among some motoring groups and that there is a need to extend current levels of enforcement as well as adopt innovative strategies to enhance the impact of these operations on the offending behaviour.     

Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment

Problem

Falls from heights in residential construction are common, especially among inexperienced workers.

Methods

We conducted a comprehensive needs assessment to determine gaps in the school-based apprentice carpenters' fall prevention training. A team of carpenter instructors and researchers revised the fall prevention training to fill these gaps. Apprentice evaluation and feedback guided ongoing curricular improvements.

Results

Most apprentice carpenters performed work tasks at heights prior to training and fall protection techniques were not commonly used at residential construction sites. Priorities of the revised school-based training included safe ladder habits, truss setting, scaffold use, guarding floor openings, and using personal fall arrest systems. New apprentices were targeted to ensure training prior to exposure at the workplace. We used adult learning principles to emphasize hands-on experiences. A framed portion of a residential construction site was fabricated to practice fall protection behaviors in a realistic setting. The revised curriculum has been delivered consistently and apprentice feedback has been very favorable.

Conclusions

Integration of needs assessment results was invaluable in revising the school-based carpenters apprentice fall prevention curriculum. Working closely with the instructors to tailor learning experiences has provided preliminary positive results.

Impact on Industry

The fall safety of the residential construction industry continues to lag behind commercial construction and industrial settings. The National Occupational Research Agenda includes a Strategic Goal to strengthen and extend the reach of quality training and education in the construction industry via mechanisms such as construction safety and health training needs assessments. This study demonstrates how a structured process can be used to identify and remedy gaps and improve training effectiveness. We encourage others to take steps to assess and increase the impact of training efforts directed at all residential construction professionals; including both union and non-union workers. The implications are even greater in the non-union sector where most U.S. residential work is done.     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

Roles of academia in regional sustainability initiatives: outreach for a more sustainable future

Institutions of Higher Education have to cope with an array of challenges in the 21st century including globalization of teaching, research and outreach activities; additionally there are dramatic increases in competition for students, staff and funding sources. Meanwhile, local and regional involvement in regional sustainable development is increasing in importance as well. This latter process is driven by the mandates from many sources for academic involvement in working on the multi-faceted issues pertaining to Sustainable Development (SD). This requires concerted action not only at the global, but also at the local and regional levels. This article provides an overview of this special issue of the Journal of Cleaner Production on the Roles of Academia in Regional Sustainable Development Initiatives. The essence of the 11 articles contained in this special issue is summarized and contextualized within the rapidly evolving academic efforts on SD. Recommendations are made of ways for academia to help their regions to make more rapid progress toward SD via involvement of their faculty, students and staff in Regional SD programs and processes.     

The role of co-operation between academia and policymakers for the development and use of sustainability indicators – a case from the Finnish Kymenlaakso Region

In this article, we analyze the co-operation between academia and other stakeholders in the development and use of sustainability indicators. The empirical case is a self-assessment of a Life-Environment project, ECOREG (2002–2004), in which eco-efficiency indicators were constructed for the Finnish Kymenlaakso Region. In the article the relationship between academia and local decision-makers in both the ECOREG Project and the activities thereafter is examined. Contrary to many sustainability indicator initiatives the ECOREG indicators have been updated and used after the original project ended. A main conclusion of the article is that the use of the indicators is largely influenced by how they were originally developed. More specifically, that knowledge was jointly produced instead of being merely transferred from academia to policymakers affected the relevance of the indicators as well as the capabilities of local actors to use, update and further develop the indicators.     

Characterization of Air Quality Problems in Five Finnish Indoor Ice Arenas

ABSTRACT

The air quality in five Finnish ice arenas with different volumes, ventilation systems, and resurfacer power sources (propane, gasoline, electric) was monitored during a usual training evening and a standardized, simulated ice hockey game. The measurements included continuous recording of carbon monoxide (CO), nitric oxide (NO), and nitrogen dioxide (NO₂) concentrations, and sampling and analysis of volatile organic compounds (VOCs). Emissions from the ice resurfacers with combustion engines caused indoor air quality problems in all ice arenas. The highest 1-hour average CO and NO₂ concentrations ranged from 20 to 33 mg/m³ (17 to 29 ppm) and 270 to 7440 µg/m³ (0.14 to 3.96 ppm), respectively. The 3-hour total VOC concentrations ranged from 150 to 1200 µg/m³. The highest CO and VOC levels were measured in the arena in which a gasoline-fueled resurfacer was used. The highest NO₂ levels were measured in small ice arenas with propane-fueled ice resurfacers and insufficient ventilation.

In these arenas, the indoor NO₂ levels were about 100 times the levels measured in ambient outdoor air, and the highest 1-hour concentrations were about 20 times the national and World Health Organization (WHO) health-based air quality guidelines. The air quality was fully acceptable only in the arena with an electric resurfacer. The present study showed that the air quality problems of indoor ice arenas may vary with the fuel type of resurfacer and the volume and ventilation of arena building. It also confirmed that there are severe air quality problems in Finnish ice arenas similar to those previously described in North America.     

Study of Miller timing on exhaust emissions of a hydrotreated vegetable oil (HVO)-fueled diesel engine

The effect of intake valve closure (IVC) timing by utilizing Miller cycle and start of injection (SOI) on particulate matter (PM), particle number, and nitrogen oxide (NO_x) emissions was studied with a hydrotreated vegetable oil (HVO)-fueled nonroad diesel engine. HVO-fueled engine emissions, including aldehyde and polyaromatic hydrocarbon (PAH) emissions, were also compared with those emitted with fossil EN590 diesel fuel. At the engine standard settings, particle number and NO_x emissions decreased at all the studied load points (50%, 75%, and 100%) when the fuel was changed from EN590 to HVO. Adjusting IVC timing enabled a substantial decrease in NO_x emission and combined with SOI timing adjustment somewhat smaller decrease in both NO_x and particle emissions at IVC??50 and??70 °CA points. The HVO fuel decreased PAH emissions mainly due to the absence of aromatics. Aldehyde emissions were lower with the HVO fuel with medium (50%) load. At higher loads (75% and 100%), aldehyde emissions were slightly higher with the HVO fuel. However, the aldehyde emission levels were quite low, so no clear conclusions on the effect of fuel can be made. Overall, the study indicates that paraffinic HVO fuels are suitable for emission reduction with valve and injection timing adjustment and thus provide possibilities for engine manufacturers to meet the strictening emission limits.

Implications: NO_x and particle emissions are dominant emissions of diesel engines and vehicles. New, biobased paraffinic fuels and modern engine technologies have been reported to lower both of these emissions. In this study, even further reductions were achieved with engine valve adjustment combined with novel hydrotreated vegetable oil (HVO) diesel fuel. This study shows that new paraffinic fuels offer further possibilities to reduce engine exhaust emissions to meet the future emission limits.

Supplementary Materials: Supplementary materials are available for this paper. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for a complete list of analysed PAH compounds.     

What kinds of injuries do OSHA inspections prevent?

Objective

OSHA's enforcement program is one of the major public efforts to protect American workers. We examine both the scope of injury prevention that inspections can contribute and the types of standards that contribute the most.

Methods

We linked Pennsylvania Department of Labor and Industry files for lost-time injuries and employment to calculate injury rates for 1998-2005 for all single-establishment manufacturing firms. We linked these to OSHA inspection records.

Results

Inspections with penalties did affect injury types unrelated to standards as well as those related. We also found again that citations for violations of the standard requiring personal protective equipment had the largest impact on preventing injuries.

Impact on Industry

Programs requiring protective equipment use deserve added attention from consultants and inspectors. In addition, some inspections spur managers to undertake safety measures that go beyond compliance with standards.     

Effects of safety climate on safety norm violations: exploring the mediating role of attitudinal ambivalence toward personal protective equipment

Problem

Research on the role of organizational and psychosocial factors in influencing risk behaviors and the likelihood of injury at work showed that safety climate also has great impact on workers’ behavior. However, the mechanisms through which this impact operates are still partially unclear.

Method

In order to explore the role that attitudinal ambivalence toward wearing PPE might play in mediating the impact of safety climate on safety norm violations, a questionnaire was administered to 345 Italian workers.

Results

Three dimensions of safety climate (i.e., company safety concern, senior managers’ safety concern, supervisors’ attitudes towards safety) were found to be positively associated with the individual ambivalence level, whereas the fourth one (i.e., work pressure) was negatively correlated with it. In turn, low levels of ambivalence were associated with a lower tendency to break the safety norms, even though the perception of a good safety climate also maintained a direct effect on unsafe behaviors.

Impact on industry

Designers of training program for the prevention of work related injuries must pay great attention to the psycho-social factors (such as the effects of the safety climate perception by employees on their attitudes and behaviors), and include specific contents into the prevention programs in order to improve workers compliance with safety norms.     

Path forward: Emerging issues and challenges

The NIOSH Construction Program worked with industry stakeholders to develop a National Occupational Safety and Health Construction Agenda to target future research and activities. The Program and its partners are also cognizant that new developments can emerge over time and that research can play an important role in helping to understand and address these emerging issues. Examples of emerging issues relevant to construction safety and health are described. These include: (a) climate change and energy considerations; (b) green construction developments and opportunities; (c) new materials; (d) changes in industry structure and practice; (e) workforce developments and disparities; (f) injury underreporting and cost and risk shifting; and (g) increased interest in addressing root causes. Responding to emerging issues while maintaining a focus on fundamental longstanding issues represents an ongoing challenge for researchers and industry organizations. Additional research to understand the diffusion and adoption of research by the industry is also needed. Research accomplished to date provides a strong foundation for addressing future industry needs and trends.