A Processing,Characterization and Marine Biodegradation Study of Melt-Extruded Polyhydroxyalkanoate (PHA) Films

A series of polyhydroxyalkanoates (PHA), all containing 1% nucleating agent but varying in structure, were melt-processed into films through single screw extrusion techniques. This series consisted of three polyhydroxybutyrate (PHB) and three polyhydroxybutyrate-valerate (PHBV) resins with varying valerate content. Processing parameters of temperature in the barrel (165–173 °C) and chill rolls (60 °C) were optimized to obtain cast films. The gel-permeation chromatography (GPC) results showed a loss of 8–19% of the polymer’s initial molecular weight due to extrusion processing. Modulated differential scanning calorimetry (MDSC) displayed glass transition temperatures of the films ranging from −4.6 to 6.7 °C depending on the amount of crystallinity in the film. DSC data were also used to calculate the percent crystallinity of each sample and slightly higher crystallinity was observed in the PHBV series of samples. X-ray diffraction patterns did not vary significantly for any of the samples and crystallinity was confirmed with X-ray data. Dynamic mechanical analysis (DMA) verified the glass transition trends for the films from DSC while loss modulus (E′) reported at 20 °C showed that the PHBV (3,950–3,600 MPa) had the higher E′ values than the PHB (3,500–2,698 MPa) samples. The Young’s modulus values of the PHB and PHBV samples ranged from 700 to 900 MPa and 900 to 1,500 MPa, respectively. Polarized light microscopy images revealed gel particles in the films processed through single-screw extrusion, which may have caused diminished Young’s modulus and tensile strength of these films. The PHBV film samples exhibited the greatest barrier properties to oxygen and water vapor when compared to the PHB film samples. The average oxygen transmission rate (OTR) and water vapor transmission rate (WVTR) for the PHBV samples was 247 (cc-mil/m²-day) and 118 (g-mil/m²-day), respectively; while the average OTR and WVTR for the PHB samples was 350 (cc-mil/m²-day) and 178 (g-mil/m²-day), respectively. Biodegradation data of the films in the marine environment demonstrated that all PHA film samples achieved a minimum of 70% mineralization in 40 days when run in accordance with ASTM 6691. For static and dynamic incubation experiments in seawater, microbial action resulting in weight loss as a function of time showed all samples to be highly biodegradable and correlated with the ASTM 6691 biodegradation data.     

Recent progress on preparation and properties of nanocomposites from recycled polymers: A review

Currently, the growing consumption of polymer products creates the large quantities of waste materials resulting in public concern in the environment and people life. Nanotechnology is assumed the important technology in the current century. Recently, many researchers have tried to develop this new science for polymer recycling. In this article, the application of different nanofillers in the recycled polymers such as PET, PP, HDPE, PVC, etc. and the attributed composites and blends is studied. The morphological, mechanical, rheological and thermal properties of prepared nanocomposites as well as the future challenges are extensively discussed. The present article determines the current status of nanotechnology in the polymer recycling which guide the future studies in this attractive field.     

Non-detection errors in a survey of persistent, highly-detectable vegetation species

Rare, small or annual vegetation species are widely known to be imperfectly detected with single site surveys by most conventional vegetation survey methods. However, the detectability of common, persistent vegetation species is assumed to be high, but without supporting research. In this study, we evaluate the extent of false-negative errors of perennial vegetation species in a systematic vegetation survey in arid South Australia. Analysis was limited to the seven most easily detected persistent vegetation species and controlled for observer skill. By comparison of methodologies, we then predict the magnitude of non-detection error rates in a second survey. The analysis revealed that all but one highly detectable perennial vegetation species was imperfectly detected (detection probabilities ranged from 0.22 to 0.83). While focussed in the Australian rangelands, the implications of this study are far reaching. Inferences drawn from systematic vegetation surveys that fail to identify and account for non-detection errors should be considered potentially flawed. The identification of this problem in vegetation surveying is long overdue. By comparison, non-detection has been a widely acknowledged, and dealt with, problem in fauna surveying for decades. We recommend that, where necessary, vegetation survey methodology adopt the methods developed in fauna surveying to cope with non-detection errors.     

Field application of SPME as a novel tool for occupational exposure assessment with inhalational anesthetics

Occupational exposure to inhalational anesthetics occurs routinely in operating rooms. It could induce serious health hazards and diseases. This exposure assessment is a crucial step in determining risks. In this study, a pen-shaped holder for solid-phase microextraction (SPME) sampler was successfully applied as a time-weighted average sampling tool for workshift exposure assessment of operation room staff to halothane. It proved to be very convenient for use in occupational environments such as operation rooms. Samples were analyzed by a gas chromatography-mass spectrometry. The validity of the SPME method was checked in real-world conditions with Occupational Safety and Health Administration (OSHA) 103 standard method for the determination of inhalational anesthetics. A good agreement between OSHA 103 and SPME methods was obtained and results demonstrated no statistically significant differences in anesthetic concentrations determined by the two analytical methods (p?≥?0.05). It is concluded that SPME in retracted mode could successfully be applied in occupational exposure assessment purposes.     

Performance comparison of tin oxide anodes to commercially available dimensionally stable anodes

Dimensionally stable anodes (DSAs) demonstrate potential for the electrochemical treatment of industrial waste streams and disinfection of effluent. Oxidation by laboratory-prepared tin oxide DSAs was compared with that of commercially available ruthenium oxide, iridium oxide, and mixed metal oxide DSAs, using hexanol as a probe molecule. The performance of the four anodes was similar in two-chamber reactors, in which the anode cell was separated from the cathode cell by a Nafion membrane, which allows transmission of current between the chambers, but not passage of chemical constituents. The anodes were then evaluated in single-cell reactors, which are more representative of potential treatment and disinfection applications. However, in the single-cell reactors, the tin oxide anodes were significantly more effective at oxidation and generated higher quality cyclic voltammograms than the other DSAs. These results suggest that tin oxide anodes have greater potential than the three commercially available DSAs tested for industrial waste stream treatment and effluent disinfection.     

Developing a New Operations Plan for the Bow River Basin Using Collaborative Modeling for Decision Support

The Bow River Basin is a cornerstone of Alberta's development. In 2010, stakeholders representing interests from agriculture, municipalities, environment, and more formed the Bow River Project Research Consortium to help determine the potential for improving the operations in the basin. At present, upstream reservoirs are operated primarily for hydropower, whereas downstream reservoirs are operated for irrigation. Through Collaborative Modeling for Decision Support the stakeholders were able to develop a new method for operating the system that would dramatically improve environmental performance. The main components of the new operating strategy called for: purchase or setting aside of a small amount of storage volume in the power reservoirs; a set of rules for releases from that storage; an agreement by the major irrigation districts with the largest water licenses to utilize their ability to shift deliveries to and from their large offstream storage reservoirs to allow for increased instream flows, and to allow junior water license holders (mainly municipal and industrial supplies) an uninterrupted water supply; limitations of reservoir fluctuations to improve inreservoir habitat for fisheries; and increased minimum flows throughout the system leading to improved environmental outcomes. Costs of this strategy were minimal, impacts on power revenue were estimated at <US$2 million/yr on average. Compensatory arrangements should be possible.     

Modelling and optimisation for design of hydrogen networks for multi-period operation

Hydrogen management is a problem of increasing importance: hydrogen consumption of refineries is rising sharply with additional capacities of hydrocracking and hydrotreating units in order to comply with cleaner fuel specifications. Product Specifications for transportation fuels are becoming increasingly stringent to ensure production of environmentally more benign fuels. Hydrogen management techniques currently do not account for varying operating conditions of hydrogen consuming processes and assume constant operating conditions. A novel approach is developed for the design of flexible hydrogen networks that can remain optimally operable under multiple periods of operation. The proposed methodology for multi-period design of hydrogen networks can take into account pressure differences, maximum capacity of existing equipment, and optimal placement of new equipment such as compressors.     

Fungal spore fragmentation as a function of airflow rates and fungal generation methods

The aim of this study was to characterise and quantify the fungal fragment propagules derived and released from several fungal species (Penicillium, Aspergillus niger and Cladosporium cladosporioides) using different generation methods and different air velocities over the colonies. Real time fungal spore fragmentation was investigated using an Ultraviolet Aerodynamic Particle Sizer (UVASP) and a Scanning Mobility Particle Sizer (SMPS). The study showed that there were significant differences (p < 0.01) in the fragmentation percentage between different air velocities for the three generation methods, namely the direct, the fan and the fungal spore source strength tester (FSSST) methods. The percentage of fragmentation also proved to be dependent on fungal species. The study found that there was no fragmentation for any of the fungal species at an air velocity ≤0.4 m s^?1 for any method of generation. Fluorescent signals, as well as mathematical determination also showed that the fungal fragments were derived from spores. Correlation analysis showed that the number of released fragments measured by the UVAPS under controlled conditions can be predicted on the basis of the number of spores, for Penicillium and A. niger, but not for C. cladosporioides. The fluorescence percentage of fragment samples was found to be significantly different to that of non-fragment samples (p < 0.0001) and the fragment sample fluorescence was always less than that of the non-fragment samples. Size distribution and concentration of fungal fragment particles were investigated qualitatively and quantitatively, by both UVAPS and SMPS, and it was found that the UVAPS was more sensitive than the SMPS for measuring small sample concentrations, whilethe results obtained from the UVAPS and SMAS were not identical for the same samples.     

A comparison of disposal methods for on-site sewage facilities within the state of Texas,USA

Currently, 1.5 million homes in Texas, USA utilize an on-site sewage facility to manage their household waste. This study compares the conventional septic dispersal technology of perforated pipe drain field with two of the new technologies recently implemented in Texas, multi-pipe and chamber systems, determining if soil classification and climate are influencing factors in functional ability for each of the technologies. There is no statistical significance for failure of a system with respect to system type or climate zone. The textural classification of soil is a statistically significant variable in septic system failures. Soil type III, which includes the clay groups except pure clays and silty clay, appears to significantly influence system failures. Additionally, occupant misuse and lack of maintenance are contributing factors to system failure.