Biodiversity protection funding preference: a case study of hotspot geoinformatics and digital governance for the Map of Italian Nature in the presence of multiple indicators of ecological value,ecological sensitivity and anthropic pressure for the Oltrepò Pavese and Ligurian-Emilian Apennine study area in Italy

The environmental decision-maker is aware of the increasing difficulties in finding sufficient financial resources for nature conservation. So he must focus his attention on ecological situations that more than the others merit considering and defending because of elevated value but also because of risk for their intrinsic characteristics and for human pressure acting on them. Usually an ecological scientist focuses his attention on the natural patches of the landscape, analyzing their peculiar ecological traits forgetting that, even if we want to protect some environmental critical situations, this can be done only moving to the administrative partition of the territory since the central and local environmental stakeholders have primary interest in providing funds to those involved in those critical situations. The present work shows a methodological approach, consisting of a set of statistical and geoinformational tools, considering both ecological and socio-demographical indicators. The goal is not simply to give some general guidelines for environmental policies to the involved stakeholders but focuses more on finding out which administrative local partitions in a study area are more worthy to receive urgently the priority funds for biodiversity protection to face critical environmental situations often due to a combination of intrinsic ecological parameters and external human pressure ones. Obtaining results that cover 5% of the Communes involved in the area seems to be a realistic result that a decision-maker can support and fund. Methodologically and geospatial data analytically, the investigation offers interesting challenges for surveillance geoinformatics of hotspot detection and prioritization, because of the presence of multiple hotspots and multiple sets of multiple indicators.     

Natural radioactivity in refractory manufacturing plants and exposure of workers to ionising radiation

This paper shows the results of a survey carried out at some refractory manufacturing plants. During the first part of the survey, the concentration of natural radioactivity in raw materials and end-products, coming from four plants, was assessed. Several raw materials and, as a consequence, some end-products as well have shown activity concentrations exceeding a few hundreds of Bq kg⁻¹ of ²³⁸U and ²³²Th. In some important raw materials, such as bauxite and corundums, a remarkable radioactive disequilibrium was observed; this is probably due to the high temperature processes undergone by these materials. The second part of the survey focussed on the measurements of ambient equivalent dose rates, airborne dust concentrations and radon indoor. On the basis of results obtained, the effective dose for the standard worker was estimated. Two different types of refractory plants were investigated. Effective doses for both plants were lower than 1 mSv y⁻¹.     

Heavy metals in the fishery products of low Lazio and the use of metallothionein as a biomarker of contamination

This study aims to investigate the use of metallothionein as a biomarker and its environmental impact on aquatic systems. According to the species’ characteristics, the interactions of toxic elements with living organisms in marine water can lead to biomagnifications in the trophic chain or bioconcentration of what is in the water. In many aquatic organisms, the presence of metallothionein proteins was studied. The chemical analysis of these bioindicators establishes, therefore, a sensitive method for the measurement of bioavailability which, over the years, allows for the quantification of the current pollution agents in the environment. Two study areas were selected along the Latium coasts. They are differentiated by their economic activities and their kind and level of environmental impact (mainly on marine pollution). These areas were selected in order to differentiate the maximum degree of both economic development and environmental quality. In particular, the presence of pollutants in the sea due to land activities was evaluated to compare the quality of the fishing products obtained from locations subject to various environmental impacts. The heavy metal concentrations were evaluated in water samples taken from different 30 sections of the fishes in order to understand the metabolism and origin of these contaminants. The primary metals studied were: mercury (Hg), zinc (Zn), nickel (Ni), lead (Pb), cadmium (Cd), and copper (Cu). All data produced were analyzed via multivariate analyses in order to provide a final and reliable indicator.     

Life cycle assessment of spray dried soluble coffee and comparison with alternatives (drip filter and capsule espresso)

This paper aims to evaluate the environmental burdens associated with spray dried soluble coffee over its entire life cycle and compare it with drip filter coffee and capsule espresso coffee. It particularly aims to identify critical environmental issues and responsibilities along the whole life cycle chain of spray dried coffee. This life cycle assessment (LCA) specifically uses foreground data obtained directly from coffee manufacturers and suppliers. Aside from energy consumption and greenhouse gases emissions, water footprint is also studied in detail, including regionalization of water impacts based on the ecological scarcity method 2006. Other impact categories are screened using the IMPACT 2002+ impact assessment method.The overall LCA results for a 1 dl cup of spray dried soluble coffee amounts approximately to 1 MJ of primary non-renewable energy consumption, to emissions of 0.07 kg of CO_2-eq, and between 3 and 10 l of non-turbined water use, depending on whether or not the coffee cultivation is irrigated and wet treated. When considering turbined water, use can be up to 400 l of water per cup. Pouch – and to a lesser extent metal can packaging alternatives – show lower environmental burdens than glass or sticks.On average, about one half of the environmental footprint occurs at a life cycle stage under the control of the coffee producer or its suppliers (i.e., during cultivation, treatment, processing, packaging up to distribution, along with advertising) and the other half at a stage controlled by the user (shopping, appliances manufacturing, use and waste disposal). Key environmental parameters of spray dried soluble coffee are the amount of extra water boiled and the efficiency of cup cleaning during use phase, whether the coffee is irrigated or not, as well as the type and amount of fertilizer used in the coffee field. The packaging contributes to 10% of the overall life cycle impacts.Compared to other coffee alternatives, spray dried soluble coffee uses less energy and has a lower environmental footprint than capsule espresso coffee or drip filter coffee, the latter having the highest environmental impacts on a per cup basis. This study shows that a broad LCA approach is needed to help industry to minimize the environmental burdens directly related to their products. Including all processes of the entire system is necessary i) to get a comprehensive environmental footprint of the product system with respect to sustainable production and consumption, ii) to share stakeholders responsibility along the entire product life cycle, and iii) to avoid problem shifting between different life cycle stages.     

Spatial distribution patterns of the soft corals Alcyonium acaule and Alcyonium palmatum in coastal bottoms (Cap de Creus, northwestern Mediterranean Sea)

Current knowledge on the abundance and distribution patterns of different soft coral species is relatively limited when compared to other benthic suspension feeders such as gorgonians and hard coral species. To overcome this scarcity of information, the distribution patterns of the soft corals Alcyonium acaule and Alcyonium palmatum were investigated in northwestern Mediterranean benthic communities over a wide geographical (60 km of coastline) and bathymetrical (0–70 m depth) extent using a remotely operated vehicle. A. acaule was the most abundant species in the study area with highest recorded density of 18 col m^?2 found at depths of 35–45 m in areas that are directly exposed to strong near-bottom currents. Conversely, A. palmatum was only found as scattered solitary colonies at greater depths in soft bottoms, with maximum density of 2.4 col m^?2. Medium and large colonies of A. acaule were preferentially found on sloping and vertical rocky bottoms where they form dense patches. High-density patches of A. acaule were preferentially found on vertical rocky bottom, while isolated colonies were preferentially observed on coralligenous substrata as well as on flat soft and maërl substrates. A. acaule biomass distribution showed highest values between 40 and 45 m depth, and between 60 and 65 m depth. This suggests that deeper populations are formed by colonies that are bigger than the equivalent shallower ones. Although both species are almost genetically identical, ecologically they are very different. For this reason, conservation plans should consider the differential ecological traits shown by these two soft coral species.     

Evaluation of surface water quality using an ecotoxicological approach: a case study of the Piracicaba River (São Paulo, Brazil)

A long-term study was conducted to evaluate Piracicaba River water (São Paulo state, Brazil) using different methodologies and organisms. During 1 year (February 2011 to January 2012), water samples were collected monthly at six different locations and exposed under laboratory conditions to the microcrustaceans Ceriodaphnia dubia and Ceriodaphnia silvestrii for 7 days and to the fish Danio rerio for 4 days to evaluate effects on reproduction and on gill morphology, respectively. Physical–chemical parameters of the water were also measured. Physical–chemical characteristics demonstrated decreasing water quality from upstream to downstream of the river. Effects on the reproduction of C. dubia and C. silvestrii were observed in 3 months (February and March 2011 and January 2012) and occurred in samples collected close to industrialized cities like Americana and Piracicaba. Evaluation of the gills showed normal function of the organ during all months, except in February, September, and October for some locations.     

Landsat ETM+ Images in the Estimation of Seasonal Lake Water Quality in Boreal River Basins

We investigated the use of Landsat ETM+ images in the monitoring of turbidity, colored dissolved organic matter (CDOM), and Secchi disk transparency (Z(SD)) in lakes of two river basins located in southern Finland. The ETM+ images were acquired in May, June, and September 2002 and were corrected for atmospheric disturbance using the simplified method of atmospheric correction (SMAC) model. The in situ measurements consisted of water sampling in the largest lake of the region, routine monitoring results for the whole study area, and Z(SD) observations made by volunteers. The ranges of the water quality variables in the dataset were as follows: turbidity, 0.6-25 FNU; absorption coefficient of CDOM at 400 nm, 1.0-12.2 m(-1); Z(SD), 0.5-5.5 m; and chlorophyll a concentration, 2.4-80 mug L(-1). The estimation accuracies of the image-specific empirical algorithms expressed as relative errors were 23.0% for turbidity, 17.4% for CDOM, and 21.1% for Z(SD). If concurrent in situ measurements had not been used for algorithm training, the average error would have been about 37%. The atmospheric correction improved the estimation accuracy only slightly compared with the use of top-of-atmospheric reflectances. The accuracy of the water quality estimates without concurrent in situ measurements could have been improved if in-image atmospheric parameters had been available. The underwater reflectance simulations of the ETM+ channel wavelengths using water quality typical for Finnish lakes (data from 1113 lakes) indicated that region-specific algorithms may be needed in other parts of the country, particularly in the case of Z(SD). Despite the limitations in the spectral and radiometric resolutions, ETM+ imagery can be an effective aid, particularly in the monitoring and management of small lakes (<1 km(2)), which are often not included in routine monitoring programs.     

Brominated flame retardants and phenolic endocrine disrupters in Finnish human adipose tissue

Brominated flame retardants and phenolic compounds, of which several have been shown to exhibit endocrine disrupting effects, were screened in extracts of Finnish human adipose tissue samples. The samples were collected during autopsy from 39 subjects, of which 23 were males and 16 females. The samples were homogenised and extracted, and then cleaned-up by preparative gel permeation chromatography. The phenolic compounds were determined in silylated extracts. A total of 21 individual compounds were analysed in the extracts by gas chromatography-mass spectrometry (HRGC-LRMS) in the selected ion monitoring mode. The most commonly occurring compounds were 4-octylphenol diethoxylate, 4,4'-dihydroxybiphenyl, and 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), but also some other alkylphenols, pentabromophenol, and 2,2',4,4',5-penta- and 2,2',4,4',5,5'-hexabromodiphenyl ether could be detected in 1-6 samples. The concentrations were ranging from trace amounts to 71 ng/g of lipid weight. The mean concentration of BDE-47 was 1.20 ng/g lipids, however, in 15 of the samples the concentration was below the detection limit. Compared to other European studies the average concentration of BDE-47 obtained in this study is at the lower end of the reported concentrations.     

Peracetic acid disinfection: a feasible alternative to wastewater chlorination.

The paper summarizes the results of a bench-scale study to evaluate the feasibility of using peracetic acid (PAA) as a substitute for sodium hypochlorite both for discharge into surface water and for agricultural reuse. Trials were carried out with increasing doses (1, 2, 3, 5, 10, and 15 mg/L) and contact times (6, 12, 18, 36, 42, and 54 minutes) to study disinfectant decay and bacterial removal and regrowth, using fecal coliform and Escherichia coli (E. coli) as process efficiency indicators. Peracetic acid decay kinetics was evaluated in tap water and wastewater; in both cases, PAA decays according to first-order kinetics with respect to time, and a correlation was found between PAA oxidative initial consumption and wastewater characteristics. The PAA disinfection efficiency was correlated with operating parameters (active concentration and contact time), testing different kinetic models. Two data groups displaying a different behavior on the basis of initial active concentration ranges (1 to 2 mg/L and 5 to 15 mg/L, respectively) can be outlined. Both groups had a "tailing-off" inactivation curve with respect to time, but the second one showed a greater inactivation rate. Moreover, the effect of contact time was greater at the lower doses. Hom's model, used separately for the two data groups, was found to best fit experimental data, and the disinfectant active concentration appears to be the main factor affecting log-survival ratios. Moreover, the S-model better explains the initial resistance of E. coli, especially at low active concentrations (< 2 mg/L) and short contact times (< 12 minutes). Microbial counts, performed by both traditional methods and flow cytometry, immediately and 5 hours after sample collection (both with or without residual PAA inactivation), showed that no appreciable regrowth took place after 5 hours, neither for coliform group bacteria, nor for total heterotrophic bacteria.